Lexus HS 250H 2009 2010 2011 2012 Hybrid Battery Cell NIMH Module 7.8V and Up

Description: 1 Hybrid Battery Cell Gen 2-3.Battery will measure between 7.8 to 8.15volts when shipped.Check our other listings for Hybrid Cells/ Modules for Hybrid Vehicles.Battery is used in:Toyota Prius 2004-2015Prius V 2010-2017Prius C 2012-2019Camry 2007- 2017Avalon 2012-2017Altima 2007-2011Lexus GS 450H 2006-2011Lexus HS250 H 2009- 2012Lexus ES300H 2012-2017Lexus CT 200 H 2010-2015Chevrolet Silverado 2008-2013Chevy Tahoe 2008-2013GMC Sierra 2008- 2013GMC Yukon 2008-2013Cadillac Escalade 2008-2013 BY PLACING AN ORDER FOR PRODUCTS FROM THIS WEBSITE, YOU AFFIRM THAT YOU ACCEPT AND ARE BOUND BY THE TERMS AND CONDITIONS WITHIN THIS LISTING________________________________________________________________________ DESCRIPTION NIMH MODULE(S) – TESTED!COMES WITH A One Year (365) DAY LIMITED WARRANTY. BattMech is offering a listing for refurbished tested module(s) that have been tested by a complete team of skilled Technicians. Our refurbished modules have undergone rigorous Quality Assurance Testing methods that will ensure our modules operate at peak performance according to recommended use. BattMech offers a Limited Warranty on this listings Module(s) (See TERMS, WARRANTIES AND PURCHASE AGREEMENT below and LIMITED WARRANTY Section below for more information). CONDITION OF ITEM: The item is used, but tested and refurbished, and may have marks, nicks, writing, peeling, flaking, dents, wear, tare, and blemishes unlike a new item or product. The item comes with a limited warranty for your peace of mind to function as it should. The item has been pre-charged. (Do Not Charge Prior to Install!) Limited Warranty Applies, TERMS, WARRANTIES AND PURCHASE AGREEMENT below and LIMITED WARRANTY Section below for more information. This item requires disassembly and/or reassembly of part or corresponding parts when installing. PHOTOS: Photos used may be BattMech stock photos. Your item may vary slightly. Please reference Part Numbers to be sure your part number matches and is similar. *DANGERS ASSOCIATED WITH THIS PRODUCT INCLUDE RISK OF PERSONAL INJURY, DEATH, OR PROPERTY DAMAGE ARISING OUT OF OR ATTRIBUTABLE TO PURCHASER’S USE OF THE PURCHASED PRODUCT(S) INCLUDING, WITHOUT LIMITATION, PURCHASER’S INSTALLATION, REMOVAL, HANDLING, OR MODIFICATION OF SUCH PRODUCT(S). USE AT YOUR OWN RISK! If you are looking to have this item shipped to AK, HI, PR, or Outside the Lower 48 Continental States, please contact us to make a special listing just for your needs. Free Shipping will not apply. _____________________________________________________________________DO YOUR PART NUMBERS MATCH?· Double check that this is the item you need before ordering! · Do you have the correct year and or generation for the correct vehicle?· If you are not sure if this item matches the part you need, or if the part number is not listed, please contact us through eBay before you order the part to assure you have the correct part that you need. · Restocking fees may apply if you ordered the wrong part by mistake. · The Purchaser is responsible for matching the correct part needed, and verifying the part you are purchasing is the part you need. (This may include matching and verifying the part number, prom, SKU, service number, voltage, Amp Hours, Make, Model, and/or other descriptions used by OEM.) · BattMech is not responsible for items purchased that do not match the item you ordered by mistake.· Using the wrong item could cause issues outlined in the Terms, Warranties and Purchase Agreement including but not limited to Damage, Death and Loss.________________________________________________________________________ Terms and Conditions Agreement BY PLACING AN ORDER FOR PRODUCTS OR SERVICES FROM THIS WEBSITE, YOU AFFIRM THAT YOU ACCEPT AND ARE BOUND BY THESE TERMS AND CONDITIONS. Within this “Agreement”, you, the buyer, will be known as “Purchaser” and us, GlobalTech Environmental Corp. having a division and a DBA known as BattMech, the seller of product(s) on eBay.com will be known as “BattMech” for the purposes of this agreement. For purposes of this Agreement, BattMech and Purchaser may be referred to individually as a “Party” and collectively as the “Parties”.DEFINITIONS: Module(s). Nickel Metal Hydride Battery Product(s). The item(s) offered by BattMech for sale on this website or directly from BattMech being purchased by Purchaser and may also be referred to as item or items. 1. Disclaimer; Assumption of Risk; Waiver and Release. By entering into this Agreement, Purchaser acknowledges that there are certain dangers, hazards, and risks inherent in replacing and or using Product(s) offered by BattMech in a hybrid or electric vehicle and in all activities Purchaser undertakes in connection therewith Products offered by BattMech including but not limited to Battery Pack(s) or Module(s). BattMech does not provide installation or other services in connection with the Products, and therefore: (a) BattMech hereby disclaims any and all liability to Purchaser for, and Purchaser fully assumes all risk of, personal injury, death, or property damage arising out of or attributable to Purchaser’s use of the purchased Product(s) including, without limitation, Purchaser’s installation, removal, handling, or modification of such product(s); and (b) Purchaser waives and releases any and all claims on account of personal injury, death, or property damage against BattMech, its subsidiaries, affiliates, divisions, DBA’s, shareholders, officers, employees, and contractors, arising out of or attributable to Purchaser’s use of the purchased Product(s) including, without limitation, Purchaser’s installation, removal, handling, or modification of such Product(s). Notwithstanding the foregoing, the foregoing waiver and release does not extend to BattMech’s gross negligence or willful misconduct, or any other liabilities that Wisconsin law does not permit to be released by agreement. 2. Indemnification. Purchaser agrees to indemnify, defend, and hold harmless BattMech and its subsidiaries, affiliates, division’s, DBA’s, shareholders, officers, employees, and contractors, from any and all liabilities, claims, actions, damage, losses, fines, penalties, costs or expenses of any kind, including, without limitation, reasonable attorney’s fees, arising from or in connection with Purchaser’s use and or handling of the Products. 3. Limited Product Warranty. Purchaser acknowledges and accepts the terms of any applicable limited warranty for the Product which can be found below in the section titled Limited Product Warranty (the “Warranty”).” 4. Shipping and Handling; Return; Refund; Replacement Policy. Purchaser acknowledges and accepts the terms of any applicable Shipping and Handling, Return, Refund, and Replacement terms for the Item which can be found below in the section titled Shipping and Handling; Return; Refund; Replacement Policy. 5. ERRORS, INACCURACIES AND OMISSIONS. BattMech makes every effort to ensure that the information offered in the description section of this listing is accurate and error-free. BattMech apologizes for any errors that may have been stated. BattMech cannot give Purchaser any warranty that the description of Item listed in this listing will be error-free or that errors will be amended. Accuracy of description comes with no warranty whatsoever, whether express or implied, relating to the item’s description and Purchaser will indemnify, defend, and hold harmless BattMech and its subsidiaries, affiliates, divisions, DBA’s, shareholders, officers, employees, and contractors, from any and all liabilities, claims, actions, damage, losses, fines, penalties, costs or expenses of any kind, including, without limitation, reasonable attorney’s fees, arising from or in connection with errors and inaccuracies of the Product(s). 6. Training. Items available from BattMech are intended for individuals who have been trained professionally to use, handle, or repair such an item and who understand the dangers associated with such an item including electrical dangers that may cause injury or death to Purchaser and or those around Purchaser. Purchaser afirms they are trained in such areas and knowledgeable of such ways to properly use any item Purchaser buys from BattMech from this website. 7. Personal Protective Equipment. Purchaser agrees to use proper personal protective equipment when working with, using and/or handling Product(s) purchased from BattMech. Working with High Voltage can cause injury or death and Purchaser is aware of these dangers. 8. Order Acceptance and Cancellation. Purchaser agrees that making an order through this website is an offer to buy, under these terms, all products and services listed in the listing. All orders must be accepted by BattMech, or BattMech will not be obligated to sell the Products or services to Purchaser. BattMech may choose not to accept orders at our sole discretion, even after we a confirmation with an order number and details of the items you have ordered. 9. Class Action Waiver. Any claim by Purchaser must be brought in an individual capacity, and not as a plaintiff or class member in any purported class, collective, representative, multiple plaintiffs, or similar proceeding (“Class Action”). Purchaser waives the ability to maintain or participate in any Class Action in any forum or form. 10. Governing Law. This Agreement shall be governed by and construed in accordance with the internal laws of the State of Wisconsin, United States of America, without giving effect to any choice or conflict of law provisions or rules. Any legal suit, action or proceeding arising out of or related to this Agreement or the matters contemplated under this Agreement shall be instituted exclusively in the federal courts of the United States or the courts of the State of Wisconsin each case located in the city of Madison and County of Dane and each Party irrevocably submits to the exclusive jurisdiction of such courts in any such suit, action or proceeding and waives any objection based on improper venue or forum non conveniens. Service of process, summons, notice or other document by mail to such Party's address set forth herein shall be effective service of process for any suit, action or other proceeding brought in any such court.] 11. Severability. If any term or provision of this Agreement is invalid, illegal, or unenforceable in any jurisdiction, such invalidity, illegality, or unenforceability shall not affect any other term or provision of this Agreement or invalidate or render unenforceable such term or provision in any other jurisdiction. 12. Counterparts. This Agreement may be executed in counterparts, each of which shall be deemed an original, but all of which together shall be deemed to be one and the same agreement. By checking and affirming that you agree to these terms in this agreement you are signing a copy of this Agreement and electronic transmission shall be deemed to have the same legal effect as delivery of an original signed copy of this Agreement. 13. Legal Age. Purchaser must be 18 years of age or older, and able to form a binding contract with BattMech and to purchase BattMech products offered on BattMechs website or from BattMech in any manner. Purchaser herby certifies by purchasing a product or service from BattMech that Purchaser is indeed 18 years of age or older. 14. Legally Binding Contract. This agreement is a legally binding contract. If you have any questions before moving forward with this agreement, please seek legal advice. 15. Acceptance. By clinking the box or submitting the order to purchase products, Purchaser agrees to all the terms of the INDEMNIFICATION, PURCHASE, and USE AGREMENT. LIMITED WARRANTY Terms of the Limited Warranty are as follows: a) The One year (365) Day Battery Module Limited Warranty covers any Module used in a hybrid vehicle if battery Module fails due to defects in materials or workmanship of battery Module, under normal installation, use and service, during the Ninety (90) Day limited warranty period. It does not cover any battery Module that is used for commercial use in any way. The limited warranty period begins the date the item is purchased and paid for on/through eBay and extends for One year (365) Days, not more than 90 days, from purchase date of battery Module. For any claim covered by this limited warranty, BattMech, at its discretion, will arrange for the repair of your battery Module, or replacement with a battery Module of comparable quality and cost, or will refund claimant for the original cost of the purchase, minus any shipping or eBay fees at BattMech’s option. b) Refund, repair, or replacement of failed battery Module will be issued once BattMech receives back and verifies condition of failed battery Module for claim legitimacy. Return shipping cost and arrangement to BattMech of failed battery Module for claim are the claimants responsibility and these costs will not to be refunded by BattMech. The Limited Warranty Period does not renew, instead continues from original purchase date, if a battery Module is repaired or replaced under this limited warranty. c) This limited warranty does not cover a battery Module that is merely discharged, or that failed due to abuse, misuse, neglect, fire, accident, collision, explosion, freezing, theft, overcharging, alteration, improper installation, used for something other than its intended use, unauthorized attempt to repair, or failure to keep the battery properly maintained. d) The validity of all warranty claims is reviewed and decided by BattMech. BattMech makes no warranties except as expressly provided in this limited warranty. BattMech will not be liable for any punitive, consequential, or incidental damages, such as the cost of installation, towing, electrical system tests, charging a battery Module, rental vehicles, labor, loss of time, loss of use of a vehicle, loss of life, lost profits, or damage to property other than the battery Module. e) The terms of this limited warranty are Purchasers sole and exclusive remedy with respect to the purchase of your BattMech battery Module. The laws of Wisconsin will apply to this warranty and any claims or disputes with BattMech involving the purchase, use, performance, or return of your BattMech battery Module. This choice-of-law provision is intended to be given the broadest possible scope and applied to all claims and disputes, without regard to conflict of laws rules. f) WARRANTY VOID IF:o Core battery pack (original old, failed Module that these new Module are replacing) is not returned to BattMech within 30 days from purchase date of pack from BattMech.o Old bus bars are not returned after being replaced with new bus bars that are included in the purchase; this is to ensure that your new bus bars were installed to ensure optimal battery condition and life.o Damage is done to any of the QR codes on Module within packs.o Modules within pack are rearranged from original configuration sent. Your BATTMECH battery pack is professionally balanced and ordered to ensure peak performance.o Not all original Modules sent within a pack are present upon return of pack for warranty claim.o Modules have been CHARGED or DISCHARGED prior to installation into a vehicle.o Modules were not installed by a certified automobile repair technician.o Vehicle has not been started and driven for at least 30 minutes every 30 days.o Battery has depleted to less than 20% State of Charge (SOC) due to running out of fuel, engine or regenerative system malfunction, or user error. An example of user error is leaving the vehicle in neutral for extended periods while vehicle turns on. In this example, the engine is unable to recharge to the HV Battery that may result in permanent damage.o Presence of any of the following diagnostic codes: P3191 (Engine Does Not Start), P3193 (Fuel Run Out), P3190 (Poor Engine Power), P0A0F (Engine Failed to Start), C1256 (Accumulator Low Pressure), or their equivalent manufacturer diagnostic code. These diagnostic codes indicate the vehicle is unavailable to recharge the HV Battery that will lead to permanent damage.o Battery Air Filter was not cleaned and kept clear of obstructions. (Clean every 3 months)o Any reason given that may void warranty within this limited warranty not listed in Section 4.o The following information cannot be supplied to BattMech at the time a claim is made:1) Error code after scanned by OBDII (Picture/Screen Shot)2) Battery Volt by OBDII reader.3) Description of what happens to the car when the issue occurs4) Driving Mileage (If battery installed already)5) Installation Date (If battery installed already)6) Car Model with VIN (If battery installed already) g) A claim to Warranty is voided if not received within 30 days after the failure/defect occurs. h) To file a BattMech Limited Warranty Claim contact BattMech through eBay and provide all and full details of your claim. i) BattMech will automatically activate the limited warranty for Purchaser. BattMech will use the checkout/purchase date that the battery Module(s) is purchased from BattMech as start date of the Limited Warranty.________________________________________________________________________Shipping and Handling; Return; Refund; Replacement Policy SHIPPING: · BattMech will ship your item purchased using USPS, FEDEX or UPS. (All Ground)· If you purchased an item classified as a Hazardous Material, it will be shipped by ground. (BattMech employees are certified in hazardous material shipments and how to handle them correctly)· Purchases will normally be mailed out within 3 Business Days.· Free Shipping only applies to the lower 48 Continental U.S. States.· If you are looking to have this item shipped to AK, HI, PR, or Outside the Lower 48 Continental States, please contact us to make a special listing just for your needs. Free Shipping will not apply. TRACKING: BattMech will issue a tracking number/s for your package. REPLACEMENT: · Request for a replacement item must be made through eBay. For replacements regarding Limited Warranty, please reference the Limited Warranty section of this agreement. · BattMech will replace a defective item upon request through eBay and only after the Purchaser returns the defective item.· Item must be postmarked within 30-days of original purchase date unless otherwise stated through communications on eBay with BattMech.· Return of the item for a replacement and all costs associated with the return of item to be replaced are the Purchaser’s responsibility, unless otherwise stated through communications on eBay with BattMech.· A comparable item must be in stock and verified by BattMech through eBay communication to the Purchaser prior to return. (This is so we can set the replacment item aside for your return, unless otherwise stated through communications on eBay with BattMech.)· If item is replaced, replacements will be issued for the same like item only, of the same value, unless otherwise stated through communications on eBay with BattMech.· Replacement NOT ISSUEDED if damage is done to any of the QR codes or Stickers on BattMech Products.· Replacement NOT ISSUEED if what you return is not the original product BattMech sent in its original condition.· Replacement NOT ISSUED if any module is charged or discharged in any way prior to its installation into vehicle. RETURN: For returns regarding Limited Warranty, please reference the Limited Warranty section of this agreement. Returns are accepted within 30 days of purchase date. The item must be postmarked within 30 days of the purchase date. No return will be accepted if item has been damaged or the item no longer matches listing description or condition of item sold to Purchaser. · The Purchaser assumes responsibility for the cost of return, packaging, handling and shipping costs and/or fees to return the item back to BattMech. (Unless otherwise stated through communications on eBay between Purchaser and BattMech.) The Purchaser pays all return shipping costs and fees associated. Refunds will be issued once the item is returned to BattMech and inspected for damage and verified it is not in working condition. Refunds will be issued for the price you paid for the item and will not include shipping fees you may have incurred. Return request must be submitted in a message through eBay to BattMech to qualify for refund. · All returns must be submitted with the proper documentation.· We cannot guarantee fast turnaround times but will try our best to do so.· Returns NOT ACCEPTED if damage is done to any of the QR codes or Stickers on BattMech Products.· Returns NOT ACCEPTED if what you return is not the original product BattMech sent in its original condition.· Returns NOT ACCEPTED if any module is charged or discharged in any way prior to its installation into vehicle. RETURN ADDRESS: Return your eBay purchase in the exact condition as the description stated in listing to… BattMech100 West Hamilton StreetFox Lake, WI 53933USA REFUND: Refund request must be submitted in a message through eBay to BattMech to qualify for refund. For refunds regarding Limited Warranty, please reference the Limited Warranty section of this agreement. 25% Restocking Fee on returns ordered by mistake. Fee will be deducted from both the original purchase price and shipping cost. Refunds will be issued for the price you paid for the item and will not include shipping fees you may have incurred. · The Purchaser assumes responsibility for all costs of returning the item for refund including but not limited to, packaging, handling, shipping costs, and fees. (Unless otherwise stated through communications on eBay between Purchaser and BattMech.) The Purchaser shall pay all return shipping costs and fees associated with qualifying for a refund. (Unless otherwise stated through communications on eBay between Purchaser and BattMech.) Refunds will be issued once the item is returned to BattMech and inspected for damage and verified it is not in working condition. Refunds will be issued for the price you paid for the item and will not include shipping fees you may have incurred. (Unless otherwise stated through communications on eBay between Purchaser and BattMech.) Refund request must be submitted in a message through eBay to BattMech to qualify for refund. · Refunds NOT ISSUED if damage is done to any of the QR codes or Stickers on BattMech Products.· Refunds NOT ISSUED if what you return is not the original product BattMech sent in its original condition.· BattMech will not reimburse you for any lost time or credit you for time you put into a project where product does not work for any reason.· Refunds NOT ISSUED if any module is charged or discharged in any way prior to its installation into vehicle. NON-RETURN OF OLD REPLACEMENT ITEM: A non-return of item/s that is requested to be returned within this listing will VOID WARRANTY. A non-return of item/s that are requested to be returned will generate a FUTURE BILL from BattMech for stated amount of item value within the description of this listing. A non-paid bill for item/s that are requested to be returned and are found to have been a non-return may BE SENT TO COLLECTIONS if the bill is not paid on time.

Price: 35.95 USD

Location: Fox Lake, Wisconsin

End Time: 2024-10-28T18:02:55.000Z

Shipping Cost: 0 USD