Description: Reproduction and replacement parts for the No15 Transit Chest and its relatives for Lee Enfield No4T Rifles. All components and kits come with the correct type and count of screws. These are parts that I have gathered from various sources and reviewed for quality and use for my re-enacting group to present at events. With this knowledge and information I've tried to attain extra parts for those "just in case" uses and also present them here with the additional information gleaned through their use and application. The chest hinge (commercial and MOD), hasp and latch (reproduction and Land Rover) of what were "high street" items on the original WW2 procurement / build lists - also found in other applications - these hardware pieces are good to build new reproductions or repair original SA No15 chests for the No4mk1T. All of our hinge, hasp and latch items come with a set of the correct slot head countersunk (plain steel) screws. We have commissioned hinge production per the MOD drawing dated 1944 through to 1956 - hole location may vary on original war time chests so study closely. The latch was later used on Mk2 Land Rover vehicles to secure tool chest lids and come in two versions - complete circular base (correct for chest work) and flat edged base. These are excellent quality and finish and are simply the best for repairing original chests or vehicles. The C No7 .22" rifle Chest using Canadian sourced longer 4 hole hinges - these are available from surplus and broken chest which are still quite affordable. The hasps and toggles were also used on and these fit perfectly on the Bren chests, Bren 100 round magazine chests and others. All screws and fasteners are modern production of the right design:CSK S - Countersunk Slot Drive - bare steel finish.RHS - Round Head Slot Drive (and Washers) - blacked finish Transit Chest Lid Felt Seals are the DOT specification wool felt with good firmness and resilience, provide with 1/2 wide front and back strips, 3/4 wide end strips - trim to length, (apply with glue if desired - not included) and secure with the provided handcut and "tinned" tacks (the originals were tinned, these look the same via plating). These are a little narrower than the wood edge to allow for a little widening as they compress - apply with an equal gap on each side. The original specifications called for the felt to be treated with shellac, mineral oil or grease to provide water proofing and complete air tights seals - we are not storing these in underground bunkers anymore so I leave mine dry. Newly produced partition / rifle cradle kits and components - made from an approved hard wood and following the original drawing - with corrections from real examples and test fitting within them - New left hand partition kits - which include one side of the Scout Telescope hold down blocks. New right hand partition kits. Add a retaining chord for each - screws included. Also a partitions worth of battens in a kit with all the required screws - screw holes are marked but not drilled (match to your chest or follow the marks for new assemblies). All felt included and attached in the kit - sticky back / self stick. Tacked in place where required to defeat "roll memory" - additional tacks provided for you to choose to complete per original spec. or leave out for that fuzzy padded look and feel. Rifle cradle felt kits fit the halves of the removable chest fillets, these are DOT specification wool felt with good firmness and resilience, these are custom rough cut slightly oversize, trim for straightness and fit and to allow for compression (widening), each fillet pair sold separately and include the hand cut tacks to hold them in place. Scout scope housing felt kit - fits in the left lower compartment on the bottom of the left fillet and the left end plate of the crate, these are DOT specification beige wool felt with god firmness and resilience, these are custom rough cut slightly oversize, trim for straightness and fit to allow for compression (widening), sold as a telescope kit and includes hand cut tacks to hold them in place. The original internal felt was preserved from mold and rot with iodine wash - that is how they look so yellow / orange. Make up your own iodine wash to color yellow as you wish. The Transit Chest Stencil Kit is cut into craft paper with a mild adhesive backing sheet to peel them off (like a post-it note) . These can be (re-) used multiple times and will stick to a flat surface reducing bleed out. Three selections of script included "Chest SA No 15 Mk1" for front and back, "Rifle" for the front right and "Escortable Stores" for the front left. A standard letter / number stencil set can be used to put the rifle serial number next to the word "Rifle". Simple instructions included. Please feel free to ask any questions and check out my other Lee Enfield and Commonwealth WW2 items.
Price: 9.95 USD
Location: Macungie, Pennsylvania
End Time: 2024-02-08T02:29:58.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Features: Felt Included
MPN: Does Not Apply
Vintage: Yes
Country/Region of Manufacture: United States
Material: Wood
Number of Guns: 1
For Gun Type: Rifle
Brand: Unbranded
Type: Hard Case
Available Variations
Color: Left Partition - Cradle Replacement Kit
Price: 99 USD
Available Quantity: 1
Quantity Sold: 1
Color: Right Partition - Cradle Replacement Kit
Price: 72 USD
Available Quantity: 1
Quantity Sold: 0
Color: Partition Batten Kit - Single (4pcs)
Price: 39 USD
Available Quantity: 2
Quantity Sold: 0
Color: Chord - Partition Cradle Cap - Single
Price: 12 USD
Available Quantity: 6
Quantity Sold: 0
Color: Transit Chest Hinge - WD Drawing - Pair
Price: 54.95 USD
Available Quantity: 6
Quantity Sold: 0
Color: Transit Chest Hinge - Commercial - Pair
Price: 26.95 USD
Available Quantity: 4
Quantity Sold: 0
Color: Transit Chest Hasp - Repro Pair
Price: 40 USD
Available Quantity: 4
Quantity Sold: 0
Color: Folded Leather Handle - Pair
Price: 40 USD
Available Quantity: 10
Quantity Sold: 5
Color: Felt Lid Seal with Tacks
Price: 39 USD
Available Quantity: 6
Quantity Sold: 4
Color: Lid Leather Check Straps & Screws
Price: 28 USD
Available Quantity: 6
Quantity Sold: 2
Color: Stencil Kit - Chest SANo15 Mk1
Price: 44 USD
Available Quantity: 5
Quantity Sold: 4
Color: Stencil "SA No15 Mk1"
Price: 20 USD
Available Quantity: 2
Quantity Sold: 1
Color: Stencil - "Rifle"
Price: 9.95 USD
Available Quantity: 6
Quantity Sold: 0
Color: Stencil - "Escortable Stores"
Price: 11.95 USD
Available Quantity: 6
Quantity Sold: 0
Color: Lid Label - 1942 - Contents & Instructions
Price: 15 USD
Available Quantity: 10
Quantity Sold: 0
Color: Lid Label - 1944 - Contents & Instructions
Price: 15 USD
Available Quantity: 10
Quantity Sold: 2
Color: Lid Label - 1945 - Contents & Instructions
Price: 15 USD
Available Quantity: 10
Quantity Sold: 2
Color: Felt Rifle Cradle Kit - Left
Price: 15 USD
Available Quantity: 6
Quantity Sold: 2
Color: Felt Rifle Cradle Kit - Right
Price: 15 USD
Available Quantity: 6
Quantity Sold: 2
Color: Felt Scout Scope Pocket Kit
Price: 50 USD
Available Quantity: 4
Quantity Sold: 2
Color: Chest Latch - Land Rover - Flat Edge
Price: 21.95 USD
Available Quantity: 20
Quantity Sold: 0
Color: Chest Latch - Repro - Round
Price: 29.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Chest Latch - Land Rover - Round
Price: 45 USD
Available Quantity: 0
Quantity Sold: 0
Color: Complete Partition Pair Replacement Kit
Price: 165 USD
Available Quantity: 0
Quantity Sold: 0
