Lee APP Custom Universal Case Feeder 3D Printed COMPLETE KIT- No more adjusting!

Description: The wait is over! I completely re-designed, tuned and tested this universal case feed adapter for the Lee APP press. This takes the original concept shown on the YouTube channel Johnny's Reloading bench and fixes all the problems. This is the ONLY Universal Case Feeder for Lee Presses that can reliably fee cartridges like 45-70, 300 Winchester Magnum or 300/6.5 PRC. It makes cartridge changes quick and easy. Switch from 5.56 to 6.5 Creedmoor in seconds. This is not a 3D-printed copy of Bernhard Hofmann’s original design. It was certainly inspired by his design but fixes all the issues. Requires no pins, height adjustments, or difficult-to-remove cartridge adapters. Since I completely designed this system from the ground up, I can make any changes necessary including additional cartridge adapters. This system significantly reduces jams and misfeeds because it perfectly fits each cartridge. I have also designed other accessories to interface with this kit to increase reliability like upgraded feed pawls and a cartridge deflector. This kit is complete! If you request the 4 clear cartridge tubes, you will only need the Lee APP or Six Pack Pro press for this system to work. Don’t fall for the other universal case feeder designs on the market. I wouldn’t have wasted my time and money developing a better case feeder if the other options truly worked. I have a consistent flow of customers switching to my design and giving it a fantastic review! I'm a fellow reloader and shooter. I have completely tested this system, and will personally hand tune the base/adapters before it ships. The first question will be how many cartridge adapters you want: Select the number of cartridge adapters you want. During checkout, make sure you leave a message on the order specifying which cartridge adapters you need. If you have any questions, please let me know what cartridges you wish to use with this setup and I can tell you how many adapters and which tubes you would need. Here is a list of cartridge adapters that are already designed: Current Cartridge Adapter Calibers: 218 Bee223 / 5.56224 Valkyrie / 6.8 SPC30 M1 Carbine300 Blackout30-06 / 270 / 8x57308 / 6.5 Creedmoor / 6.5x47 / 6XC / 450 Bushmaster / 6GT32 Auto32 Long327 Fed Mag350 Legend38 Special / 357 Mag38 Super380 Auto40 S&W / 357 Sig45 ACP5.7x286.5x284 / 6.5x55 / 7.5x55 Swede7.62x39 / 6mm ARC / 6.5 Grendel9mm Luger / 9x1910mm Auto25 Auto7.62x25 Tokarev41 Mag / Special204 Ruger8.6 Blackout30 Super Carry44 Russian32 H&R Magnum6mm BR Large Calibers (Refer to the table in pictures to see which tubes will work)300 Win Mag / 300 PRC / 7mm Rem Mag / 264 Win Mag6.5 PRC45-7030-30 Win7.62x 54R / 300 WSM458 SOCOM444 Marlin454 Casull / 45 Colt / 44 Mag / 44-40500 S&W Magnum I can custom design and print an adapter for almost any cartridge as long as the maximum diameter of the cartridge is under .609" and length is under 2.62”. Just note it in the checkout message or send me a message and we can figure it out. When adding this item to cart, your second question will be if you want 4 clear cartridge tubes: Yes! Large Cartridge Tubes - If you select this option, I will send you QTY 4 - 18" high-quality acrylic tubes with 3d printed tube spacers. These tubes can handle most cartridges except skinny ones like 204 Ruger and 5.7x28mm (refer to the chart in the picture). These tubes are taller which requires you to refill less. Also, you won’t have to purchase the lee universal case feed kit which will save you money (these tubes do not work with the Lee collator although the collator doesn't work that well anyway.). Yes! Standard and Large Cartridge Tubes - If you select this option, I will send you QTY 4 - 18" Large sized and QTY 4 – 18” Standard sized high-quality acrylic tubes with 3d printed tube spacers. These tubes can handle all cartridges that can slide into the press. These tubes are taller which requires you to refill less. Also, you won’t have to purchase the lee universal case feed kit which will save you money (these tubes do not work with the Lee collator although the collator doesn't work that well anyway.). Yes! Standard Cartridge Tubes - If you select this option, I will send you QTY 4 - 18" high-quality acrylic tubes with 3d printed tube spacers. Refer to the chart in the pictures, you probably wont need these unless you plan to get a 204 Ruger or 5.7x28mm cartridge adapter and don’t have Lee Tubes already. These tubes are taller which requires you to refill less. Also, you won’t have to purchase the lee universal case feed kit which will save you money (these tubes do not work with the Lee collator although the collator doesn't work that well anyway.). No, I will use my 4 Lee tubes - Use this option if you already have the lee universal case feed kit and just want to upgrade the bottom case feed mechanism. Refer to the chart in the picture to make sure your tubes will feed the calibers you intend to use. ---------------------------------------------- UPGRADE OPTION: If you are one of my previous customers that purchased my Custom Universal Case Feeder and are looking to upgrade your unit to feed these larger calibers, I have created you a special listing for an upgrade here: https://www.ebay.com/itm/304830733998?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=zsOSMUxATYu&sssrc=2566055&ssuid=zsOSMUxATYu&widget_ver=artemis&media=COPY--------------------------------------------- For the ultimate in preventing misfeeds, increasing cycle rate, and reducing damage to your brass, check out my other listings including a Case Deflector and upgraded Case Feed Pawls. Feed Pawls and Case Deflector Here: https://www.ebay.com/itm/304811008881-------------------------------------------------------NEW--- ULTIMATE 6 TUBE OPTIONI just listed a 6 tube variant that comes with everything you need including the best collator on the market, funnel, feed pawls and both sets of tubes. Currently at an introductory price for the first 10 units.6 Tube Universal Case Feeder Kit Here: https://www.ebay.com/itm/304871603120

Price: 40 USD

Location: Artesia, New Mexico

End Time: 2023-09-09T06:48:27.000Z

Shipping Cost: N/A USD

Product Images

Lee APP Custom Universal Case Feeder 3D Printed COMPLETE KIT- No more adjusting!

Item Specifics

All returns accepted: ReturnsNotAccepted

Brand: Lee Precision

Type: Reloading Press

Ammunition Type: Rifle / Handgun

Gauge/Caliber: any

Capacity: 4 tubes

Model: Lee APP

Country/Region of Manufacture: United States

Price: 60 USD

Available Quantity: 1

Quantity Sold: 0

Color: 0

Price: 40 USD

Available Quantity: 1

Quantity Sold: 0

Lee APP Custom Universal Case Feeder 3D Printed COMPLETE KIT- No more adjusting!

Product Images

Item Specifics

Available Variations

Color: 1

Color: 2

Color: 3

Color: 4

Color: 5

Color: 6

Color: 7

Color: 8

Color: 9

Color: 10

Color: 11

Color: 12

Color: 13

Color: 14

Color: 15

Color: 16

Color: 17

Color: 1

Color: 1

Color: 1

Color: 2

Color: 2

Color: 2

Color: 3

Color: 3

Color: 3

Color: 4

Color: 4

Color: 4

Color: 5

Color: 5

Color: 5

Color: 6

Color: 6

Color: 6

Color: 7

Color: 7

Color: 7

Color: 8

Color: 8

Color: 8

Color: 9

Color: 9

Color: 9

Color: 10

Color: 10

Color: 10

Color: 11

Color: 11

Color: 11

Color: 12

Color: 12

Color: 12

Color: 13

Color: 13

Color: 13

Color: 14

Color: 14

Color: 14

Color: 15

Color: 15

Color: 15

Color: 16

Color: 16

Color: 16

Color: 17

Color: 17

Color: 18

Color: 18

Color: 0

Color: 0

Color: 0

Color: 0

Recommended

LEE Precision RIFLE CHARGING DIE - 90194 - Brand New!

Lee Precision Pacesetter 3 Die Set for 350 LEGEND BRAND NEW 90078 Free Shipping