KBS 75101 - KBS Cavity Coater - 17.5 Ounce Aerosol and 36" KBS Cavity Wand

Description: KBS Coatings Cavity Coater 17.5 oz Aerosol with 36" Wand and 360 Degree Tip KBS Part Number 75101Yogi's Part Number KBS75101 Cavity Coater is a one-step, super-penetrating corrosion inhibiting coating (CIC) for long term protection on all metal surfaces. Cavity Coater provides a self healing film which renders over 4000+ hrs salt spray protection (meaning Insane Rust Protection) ...over 4 times the protection of conventional cavity waxes. Use Cavity Coater with a KBS Cavity Wand to give long lasting protection for those hard to reach enclosed cavities such as rocker panels, boxed frames, inside doors & fenders, deck lids, tailgates...and more.Cavity Coater Features 4000+ Hrs Salt Spray (Insane Rust Protection) Creeps into Welds & Seams Wicks & penetrates where primers and topcoats cannot Water Displacing Self Healing Easy Application Ultra Long Lasting Multi-Surface Uses Forms Capillary Action Lubricating properties Minimizes parts replacement costs Enables faster dis-assembly when repairs are needed Protects against carbon fusion Resists alkaline solutions, most chemical & acid vapors, road salt, steam, salt water Cavity Coater Applications Automotive: Boxed frames • Rocker panels • Inside doors • Inside car & trailer frame rails • Windshield cowls • trunk lids • Hoods • Inside A-Posts • Inside B-Posts • Inside front & rear fenders & Inside tailgates • Back sides of bumpers • Weld seams (Wicks into welds & seams) • Insulating between unlike metal surfaces • Use wherever a typical cavity wax would be used. Anti-Seize/Anti-Corrosion: Nuts, bolts & screws • Shafts • Pipe fittings • Gaskets • Press ?t assemblies • Valve assemblies • Taps & drills • Pump mountings • Packing glands • Chain drives • Metal fttings • Machinery Cavity Coater Coverage 17.5oz Aerosol of Cavity Coater will coat 125 sq. ft. @ 1 mil thickness. Quart of Cavity Coater will coat 200 sq. ft. @ 1 mil thickness. Gallon of Cavity Coater will coat 800 sq. ft. @ 1 mil thickness. Cavity Coater Directions To achieve expert results, please take the time to carefully read and understand the following directions before you begin your restoration project. These directions are meant to be general guidelines only and do not cover every application or environmental situation. If you have remaining questions or concerns, please call us toll-free for technical assistance. ALWAYS WEAR PROTECTIVE GLOVES AND SAFETY GLASSES. ALWAYS WORK IN A WELL-VENTILATED AREA. Please heed all labeled warning and caution notices on all products. Description: Cavity Coater is a one-step, super-penetrating corrosion inhibiting coating (CIC) for long term protection on all metal surfaces. Cavity Coater provides a self healing film which renders over 4000+ hrs salt spray protection...over 4 times the protection of conventional cavity waxes. Use with aCavety Wand to give long lasting protection in those hard to reach enclosed cavities such as rocker panels, boxed frames, inside doors & fenders, deck lids, tailgates...and more. Coverage: 17.5oz Aerosol: 125 sq. ft. @ 1 mil thickness. Quart: 200 sq. ft. @ 1 mil thickness. Gallon: 800 sq. ft. @ 1 mil thickness. Surface Preparation: Cavity Coater requires minimal surface preparation to be effective. Remove any readily accessible loose scaly rust. CAUTION: Avoid contact with skin, eyes, and clothing. Wear protective gloves and protective goggles. DO NOT SMOKE. Use only with adequate ventilation during application and drying. NOTE: Do not caulk or paint over Cavity Coater. Cavity Coater should be applied AFTER paints/coatings have completely cured. Aerosol Can Directions: Shake well before use & occasionally again often during application process. Hold can approximately 8 -12 inches from surface to be coated. Apply a thin, even coat of 1 mil thickness. Cover completely but do not over-saturate. Wait 10 minutes for the coating to wick into the seams and weld joints. Remove any excess coating with a clean rag dampened with KBS Cavity Coater Remover. NOTE: Do not caulk or paint on top of Cavity Coater. For additional protection, Cavity Coater can be applied to weld seams after painting, if desired. Remove any excess Cavity Coater as described above. For hard to reach enclosed cavities, attach a Cavity Wand to the Cavity Coater can & insert the wand into the cavity. Depress nozzle and withdraw from cavity at about one foot per second. Repeat to ensure complete coverage or as needed. Flush residual coating from Cavity Wand by inverting Cavity Coater Aerosol can and spraying for 10 seconds to flush Cavity Wand. Bulk Can (Quart/Gallon) Directions: 1. Surface should be clean and dry. Shake can well before using. 2. Cavity Coater is applied through a KBS Underseal Gun with a CC Wand attachment or an auto body Schutz applicator type gun with spray wand. Cavity Coater contents may be poured into a clean container pot which fits your applicator gun. Excess coating may be removed with Cavity Coater Remover. 3. Apply a uniform coating to interior surfaces. For optimum protection, a 1 mil dry film is recommended. Varying air pressure and wand speed through cavity area will aid in determining coverage. Typically move a one foot per second. WARNING: If product is to be sprayed into enclosed areas such as door panels, the solvents in Cavity Coater may require several hours to escape. During this time, the enclosed area must be kept from heat, sparks, electrical devises, or open flames which could ignite vapors. Why Buy from Yogi’s? Yogi’s, Inc. has been in the business of providing parts and accessories for classic cars and street rods for over 40 years. Our Monticello, Iowa warehouse is fully stocked with the popular products our customers love. If you are in search for something not found on eBay, send us a message for availability so we can add it to our eBay store. Shipping Most products listed on our eBay store ship the same business day you place your order. Once your package ships, we will provide a tracking number. We will combine items to reduce shipping costs when applicable. For international shipping, we use the eBay Global Shipping Program. When purchasing multiple items, use the eBay “cart feature” so you can make just one transaction and get combined shipping. This is the only way we can combine international shipping. Return Policy We strive to provide quality parts and customer service. If within 30 days after you receive your items, you are unsatisfied with your purchase, you may return the item/s for a refund. Items must be returned in NEW condition with an RMA (Returned Merchandise Authorization) and copy of your original invoice. Before receiving credit all returns will be inspected to ensure they are returned in new condition with all included manuals, accessories, parts, and/or original packaging. Failure to return the item/s in new, unused, unaltered condition with all additional materials will be subject to a restocking fee or no refund. Items should be repackaged the same way they were received (in most cases with packing material and double boxed) with item invoice included. We recommend all return packages be trackable for the safety of both the customer and the business. We will not assume responsibility for lost shipments. Refunds: You can expect your refund once we have received and inspected your return. Return To: 260 Welter Drive, Monticello, IA 52310 with the RMA# on the outside of the package. *Used, installed, damaged, and special-order items are not returnable. Shipping fees are non-refundable. Please contact us for any refund questions or to get one started today. Manufacturer’s Warranty 3 Years ATTENTION CALIFORNIA RESIDENTS: WARNING: This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you have received this warning. Please feel free to contact us should you have any questions. For more information, go to www.P65Warnings.ca.gov.

Price: 35.95 USD

Location: Monticello, Iowa

End Time: 2024-07-16T18:46:48.000Z

Shipping Cost: 9.99 USD