Description: This is a 3D printed shroud for the Iceriver KS0, KS0 Pro, and KS0 Ultra. This shroud is for two miners and includes the Dual Miner Stand as well as the shroud. I have added two additional holes to the top of the shroud, not seen in the pictures, this will allow you to run the cable outside of the shroud if you so desire. This shroud diverts air from the lower fan to blow through the Power Brick storage area under the miners to help keep them cool as well. The stock brick as well as most after market bricks will fit. The slots are 80x30mm and are open at both ends. This listing is for the Dual Shroud and Dual Stand only and does not include fans, wires, screws, or miners. Currently also includes two Free Kaspa themed Fan guards as seen on my fans in the pictures. (Color does vary and may not be black) Requires two 120mm fans and 8 screws to attach the fans to the shroud. I use M4x35 Cabinet Drawer screws, they are cheap on Amazon and don't need washers or nuts if you are careful not to overtighten them. I tested these with very basic 120mm case fans, they run silent and significantly improve cooling. Temps at stock speed-Completely Stock- 60-65CSides removed with Shroud and Fan- 40-45C The last two screen shots are of temperatures of a completely stock miner with the side panels on, and a stock miner slightly overclocked with them removed and in a forced air shroud. I have not added heatsinks to the overclocked miner, other than removing the side panels and adding forced air cooling it is stock.
Price: 50 USD
Location: Elizabeth, Colorado
End Time: 2024-08-02T00:43:20.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Iceriver
Compatible Currency: Kaspa
Model: KS0
Mining Hardware: ASIC
