Harley Davidson Street Glide Road King Lower Fairing 6.5" Speaker Adapter

Description: MADE IN THE U.S.A.! IF YOU SEE THESE ANY WHERE ELSE AND THEY ARE NOT LISTED IN TEXAS, THEY ARE A CHINESE COPY OF OUR PARTS! You will be receiving a pair of speaker pods for your lower fairing left and right sidesRUBBER TRIM SHOWN IN PHOTOS IS NO LONGER PROVIDED OR AVAILABLE We are the original designer of this product. When you buy from us you buy the original high quality items from an American manufacturer and designer. Know what you buy before you purchase from an imported knock off from other states. Support American manufacturing. If they are not from Texas, they are a copy! Will work with vented or non vented lower fairings Please take the time to read this auction and which 6.5" speakers fit, these fit MOST 6.5" speakers but NOT all. Your 6.5" Speaker must have an inside mounting diameter of 5" That is what about 95% of ALL 6.5" speakers have. These pods can be used if you have "glove box's" or the small factory speaker fairings! Please read this about our competitor, you will be glad you did.. Beware of the ebay seller/competitor/copycats. Their parts are made in china and descriptions are designed to mislead you, they ship from china to california then to you. Their screw guided holes will not work properly, that design will also significantly limit you on your choices of speakers, our design allows you to mount almost any 6.50" (6 1/2") speaker. Look close at the photos they have provided, they can't even mount theirs straight themselves.. (The picture of the maroon HD is my personal bike, they used it as an example. Now look at the orange bike they have as an example.. it is not a harley davidson and not only that, they are installed crooked..) you will see that their copy doesn't line up on the outside edge of the fairing their part will be touching your fuel tank once installed, it is a physical impossibility to install a 6.5" speaker onto their pods then have them fit on your lower fairing We have sold hundreds of these and racked up thousands of miles with them on our own bikes. They are made of 1/8" thick abs and come with a rubber surround that makes them air tight and they are incredibly strong, will not crack, warp or bend.. period, as a matter of fact, we stand behind our parts with a lifetime warranty, regardless of what happens to them, they do not crack, they do not warp! These adapters allow you to install 6.5" (6 1/2") speakers to your lower fairing and with their slight upward tilt, direction sound to the rider! Will work with Vented and Non Vented lower fairings! will work on CVO bikes WILL WORK ON WATER COOLED BIKES AS WELL!They fit All Harley Lower Fairings (as pictured) from 1994-2021 Look at all our photos. Some Road Glides have different glove boxes. In contrast to other speaker pods out there, you will notice that other sellers pods have a "recessed" area on theirs where the grill has to "set" into. Their designs will significantly limit what size speaker grill will fit inside that area they allowed, that is why ours has no recessed area. Speaker grills are VERY rarely, if at all, the same overall diameter. Ours will allow for almost any speaker and grill for a 6 1/2" speaker. (there are no speakers included in this auction) In order to make sure your speakers will fit, google the specifications of your speakers or look at the box. They will have a specification called "mounting diameter" if it is larger than 5" these adapters will not work without modification. With some sanding of the inside hole of the adapter you can use a speaker with a 5 1/8" mounting diameter. Kicker, rockford fosgate, Alpine, kenwood, pioneer, jvc, clarion, panasonic and the list goes on.. all these manufacturers have a speaker that will work on these adapter and fit right in with no modifications whatsoever. Cheap marine speakers like BOSS or PYRAMID have a large grill that will hang over the adapter face and look bad, don't buy them. Unlike other pods, these install incredibly easy and are very durable! They will come with VERY detailed instructions and mounting hardware to get the job done quickly and get you on the Road! Made of textured ABS plastic, 1/8th inch thick and very strong! Installation of these pods can be done with basic tools! We have been building custom Motorcycles, Cars and Boats for over 25 years! Scroll down and you can view a few of the bikes we have built or customized. We know what Harley Riders want! These pods are made right here in our shop in Texas and the materials bought and manufactured in Texas! We take pride in what we sale! Our photos and designs are intellectual property and protected by United States Trade Dress Laws RUBBER TRIM SHOWN IN THE PHOTOS IS NOT INCLUDED BUT IS AVAILABLE TO PURCHASE SEPARATELY ON EBAY AUCTION NUMBER: 266097387987

Price: 15.98 USD

Location: Cleburne, Texas

End Time: 2024-09-07T03:59:19.000Z

Shipping Cost: 0 USD