Description: AIR CURESUPERMAXX CERAMIC BORE COATING SUPERMAXX BORE COAT is the best protection for all gun bores. It is easy to apply and creates a sintered thin film, protective ceramic coating on the bore. SuperMaxx Bore Coat creates a significant reduction in fouling (jacket, powder, lead, plastic wad, carbon) thereby reducing maintenance while maximizing the performance and longevity of your weapon. The Polysilazane Nano Ceramic coating is so thin that it will not negatively impact velocity, point of impact, or group size. Coated bores will need cleaning significantly less often and cleaning itself is much easier. SuperMaxx Bore Coat protects against both galvanic and chemical corrosion. A single application will last the useful life of the bore for many firearms. SuperMaxx Bore Coat is effective on all types of firearms including rifles, handguns, shotguns, and muzzle-loaders. 2. SURFACE PREPARATION Always ensure that firearms are unloaded and free of ammunition prior to applying the coating. · Bore should be cleaned & free from rust, and lead or copper fouling & residue. · Wipe-down all surfaces with denatured alcohol to remove all oils, dirt, etc. 3. APPLICATION · As with any new material, always test application and finished properties on a low value test article or panel before working on valuable surfaces. · Gently shake the coating container prior to application. It is important that the coating is well mixed prior to application. · Apply 10 – 15 drops to the bore mop, rotating the mop to make sure it is completely saturated, then apply the coating inside the bore & chamber. The Bore mop should be damp, not dripping. · Run the bore mop down the bore in short (2-4 inch) strokes until the end is reached. Then pull back in one smooth stroke. Repeat this process 2-3 times until the bore is coated with a thin coating. · Keep the barrel vertical to allow any excess coating to drain out of the muzzle. · Objective is to fill the micro-pores and leave a thin 2-3 micron film coating. · Allow at least 2 hours to dry. Then fire several rounds to sinter the ceramic coating and create an extremely sintered hard film nano-ceramic finish. · The Inner barrel surface will now be extremely slick & easy to clean. · No additional lubrication is required inside the bore. · Coated bores will require significantly less cleaning. In the event that cleaning is required, use a light solvent. INCLUDED WITH PURCHASE.1 1- 30ml BOTTLE 1- MICROFIBER TOWEL APPLICATION INSTRUCTIONSFREE TECHNICAL SUPPORT
Price: 34.95 USD
Location: Delray Beach, Florida
End Time: 2024-11-23T15:39:03.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: SUPERMAXX
Type: CERAMIC GUN BORE COATING
Color: Clear
Country/Region of Manufacture: United States
