Gtechniq Crystal Serum Light 30 Ml

Description: Why use Crystal Serum Light Gtechniq? Crystal Serum Light is the professional version of the famous Crystal Serum Ultra approved by Gtechniq.It provides 80% of the professional performance of Serum Ultra, but if not used properly it can be mechanically polished.When it comes to adding shine, resisting holograms, pollutants and dirt, Gtechniq Crystal Serum Ultra and Serum Light are the ultimate paint protection products.Simple steps to help you get the best results.To use Crystal Serum Light (CSL), please make sure your vehicle is indoors and can stay indoors for 12 hours after application.Do not use it under direct sunlight.Use the product only at temperatures between 5 ° C and 25 ° C.Shake well and wear gloves.Before application, please wash and decontaminate the paint thoroughly.If necessary, buff the paint, with a polisher or manually to remove imperfections.The sprayed panels are wiped with a Gtechniq MF1 microfiber cloth, and each panel is wiped down in small sections.Impregnate the buffer with 3 full measurements of CSL from the pipette, then squeeze the liquid into the buffers to achieve uniform saturation.Close the lid of the vial and set it aside - do not put the vial in your hand as this will promote premature hardening.Apply in a superimposed line over an area of approximately 50 cm by 50 cm.Use the MF1 wipes to remove residue immediately - you may need to wipe the same area a few times, but avoid applying too much force.We recommend that you use two cloths at a time.Be sure to rotate the cloth while wiping it to prevent the CSL in the cloth from hardening.Use a bright, diffused light source to check for residue residue on the surface.If you have hardened residue, you need to polish the area and reapply CSL.After finished, put the MF1 cloth in the water, wash and dry as soon as possible.Wait approximately 2 hours after applying CSL to apply EXO Ultra-Durable Hydrophobic Coating or C2 Liquid Crystal.Store in a cool, dry place.Use within three months after openingWhy use Crystal Serum Light Gtechniq? Simple steps to help you get the best results. Do not use it under direct sunlight. Use the product only at temperatures between 5 ° C and 25 ° C. Shake well and wear gloves. Before application, please wash and decontaminate the paint thoroughly. If necessary, buff the paint, with a polisher or manually to remove imperfections. Apply in a superimposed line over an area of approximately 50 cm by 50 cm. We recommend that you use two cloths at a time. Be sure to rotate the cloth while wiping it to prevent the CSL in the cloth from hardening. Use a bright, diffused light source to check for residue residue on the surface. If you have hardened residue, you need to polish the area and reapply CSL. After finished, put the MF1 cloth in the water, wash and d

Price: 90.76 USD

Location: Afa

End Time: 2024-11-24T02:37:51.000Z

Shipping Cost: 40.14 USD