Description: Welcome to this listing for a Brand New Genuine Melett replacement Turbo CHRA built, fully balanced and stocked here in the UK.If you are looking for a quality-designed, meticulously built CHRA and are worried about poor quality far eastern CHRA, then this CHRA is the perfect one for you. TURBO PART NUMBERS ***1000-970-0005 VEHICLES COMMONLY FITTED WITH THESE TURBOCHARGERS INCLUDE:Cadillac BLSSAAB 9-31.9D VEHICLE OE NO:552152569316689993194991 FITTED TO ENGINE:A19DTR, Z19DTR WARRANTY: All Melett CHRA come with a 12 month unlimited mileage warrantyCOUNTRY OF MANUFACTURE: UKDISPATCH: Within 1 working dayBALANCED: Fully high speed balanced ready to fit (no further balancing required) Melett are a long standing aftermarket manufacturer of precision turbocharger spares and produce complete, full, brand new CHRA in their UK production facility in Barnsley, England.Melett's design engineers specify only the highest quality components for use in their turbocharger CHRA and have installed strict quality control guidelines to ensure the quality is never compromised. All components are quality control checked prior to production, which then begins with all completed CHRA being high speed VSR trim balanced to much tighter tolerances than the OE manufacturer units to ensure the CHRA performs as good or better than the original, is more efficient, has no oil leaks, noise, or vibration. Where design problems are noted in OE turbochargers, Melett engineers look to improve design to overcome these issues, which are then implemented in the design and build of their replacement CHRA. Every single Turbo CHRA produced in Melett's UK production facility use:-Brand New Compressor WheelBrand New Seal PlateBrand New Bearing HousingBrand New Heat ShieldBrand New Turbine WheelBrand New Full Bearing & Seal Pack Every part is BRAND NEW, UNUSED and made to meet or exceed the OE equivalent. All components are designed and produced for heavy duty use and are fully balanced ready to fit, meaning no further balancing is required before fitment.Each completed CHRA is designated with its own unique serial number. This serial number is logged for the full duration of the warranty period and allows for full traceability of the CHRA, parts used, production dates and build specifications as well as to keep a copy of balancing certificate. Melett CHRA are fully traceable from raw material to full CHRA. Fully High Speed Balanced Tested for Oil Leaks Tested for Vibration Tested for Noise 100% Ready to fit Built in the UK As one of the largest suppliers of Melett products on the UK we are able to offer a price guarantee. Find the same product on eBay at a lesser price and we will match it. Price guarantee is valid for brand new products with matching Melett part number. Does not include old stock, sale items or damaged/missing packaging, returns or similar.We reserve the right to withdraw this offer at any time. It is important that you ensure the turbocharger part number on your unit matches the numbers in this listing. There can be more than one CHRA for a specific vehicle, so this is the only way to ensure the correct fitment. Typically, the serial number is found on the alloy inlet housing of the turbocharger. Follow the pipe from the air filter to the turbo - the housing the pipe attached to is the compressor housing. On this housing should be a metal tag, or the numbers could also be found on a machined face.Please ensure you are 100% certain you have ordered the correct part, if you are unsure, send us the vehicle REG or a list of the numbers on the turbo (or a picture) and we will confirm the unit for you. Turbo Rebuild cannot be held responsible for units ordered incorrectly. Established in the market since 1995, Melett are arguably the best turbocharger parts supplier in the aftermarket industry. Melett have grown over the years to become a company to trust for professional turbocharger reconditioners. Their continued growth and success has resulted in them being three times winners of the prestigious UK Queen?s Award for Enterprise, 2006, 2009 and 2014, and now supply turbocharger reconditioners in over 100 Countries from their base in the UK. Simply put, Melett are the No1 supplier for turbocharger repairs. When purchasing a Melett CHRA from Turbo Rebuild, we are happy to offer an installation service to fit the CHRA into your turbo housings with a full calibration. Simply purchase the CHRA and installation service and send your turbocharger to our reconditioning centre. We will fully disassemble, chemically clean housings, actuator, nozzle ring (where used), before media blasting to ensure no contamination remains and the unit looks as near to new as physically possible.All parts being reused will then be inspected to ensure are fit to reuse before the turbo is built back up with the purchased CHRA. The unit is then flow benched (where required) on our calibration rig and boost control is set and checked. The completed unit is then packed and dispatched back to your address. NOTE: All parts being reused must be in a perfect working condition and inside of OE tolerance, otherwise the parts will require replacement (we will contact customer in these instances). You are purchasing this product from Turbo Rebuild Ltd. Turbo Rebuild is a UK family run business based in Lancashire. We are professional Turbocharger Reconditioners and work from our fully equipped, purpose built workshop which houses all required machinery for the testing, repair and production of Turbochargers and Turbo parts. We have been trading in the Turbocharger market since 1998 and are fully VAT registered. We pride ourselves on the quality of the products we sell and the service we offer as our feedback shows.
Price: 235.19 USD
Location: Poulton-le-Fylde
End Time: 2023-11-15T11:11:28.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Country/Region of Manufacture: United Kingdom
Interchange Part Number: 1000-970-0005, 5304-710-0541, K04, 55215256, 93166899, 93194991, A19DTR, Z19DTR
Type: Turbo CHRA
OE Spec or Performance/Custom: OE Spec
Manufacturer Part Number: 1302-004-934
Brand: Melett
Manufacturer Warranty: 1 Year
