Ford 9" 8" Rear End Drain PLUG and BUNG kit STAINLESS STEEL plug+ WASHER

Description: This kit gives you the options of treading the housing or welding a bung in the housingWhen treading the housing drill a 16.5mm hole, then tap 18-1.5mm using the bung as a guide to make sure that the hole is taped straight and true, use stat o sealing washer on plug for a good seal, The bung can be used as a weld in, fill plug or drain, by welding the bung,, after drilling a 7/8" hole, bung will need to be clean taped after weldingkit contains:2-Stainless steel plug 1-Steel bung 1-Copper sealing washer+new stat o sealing washer MADE IN U.S.A. SHOW QUALITY PLUG WITH 5/16 INTERNAL HEX CK MY OTHER LISTING UNDER HPBRIAN FOR OTHER PLUGS AND BUNGS IN STAINLESS AND STEEL M18mm x 1.5mm thread - fits all American, Japanese, European, cars, trucks, rear end - everything! rear end drain kit STEPPED/shaped to fit against rear housing with No grinding needed , With our bungs just drill a 7/8" hole with a step drill and weld the bung on. Save labor $ AND get a better fit! Mild steel bung and 303 stainless plug, plus copper sealing and stat washer. THIS IS WHAT THE BUILDERS NEED TO USE WHEN Draining diff oil. Many people use these bungs with all types of steel housings with no problem because the bung is much thicker than the housing,, Normal mild steel welding rod/filler/wire can be used to weld these to stainless. CORRECTLY DIMENSIONED -thick enough so it won't warp when welding, CORRECT LENGTH so that the is in but not too far, so it does not obstruct flow, this is important as most of our customers are tuners and want max performance. Beware some other bungs or nuts are to thin, they will warp and leak or ruin the threads and they are a big pain to weld to round exhaust pipe. 1 to 10,000 VALUE Pack available here : MILD STEEL,, M18-1.5 BUNG STAINLESS 303 STEEL PLUG ,, COPPER SEALING WASHER STAT o SEALING WASHER We have THOUSANDS in stock in CALIFORNIA , no waiting for them to ship from overseas etc. NEED SOME CUSTOM BUNGS MADE JUST FOR YOUR MANUFACTURING NEEDS? CALL 714-287-2205 for custom orders and bulk rates shipped by USPS first class mail see our other auction to order DIAMENTIONS OF THE BUNG ARE = .430 TALL WITH THE STEP, (.300 w/out step) X 1.00 WIDE M18mm X 1.5mm THREAD, MILD STEEL INSTALATION REQUEIRS A 7/8" HOLE WITH A STEP DRILL, THEN WELD OR DRILL M16.5 HOLE AND TAP M18-1.5 PLUG = .450 TALL, M18mm X 1.5mm, 5/16" HEX, STAINLESS STEEL WASHER = 18MM X 24MM X 1.5MM. COPPER AND STAT o SEAL Shipment is made by USPS first class mail

Price: 24.89 USD

Location: Silverado, California

End Time: 2024-03-01T01:04:41.000Z

Shipping Cost: 0 USD