Falcon K561 PD6 Dana Handle 626 Satin Chrome Grade 1 Classroom Lever Locks

Description: Falcon K561 PD6 Dana Handle 626 Satin Chrome Grade 1 Classroom Lever Locks Great for New Construction, Replacement, Commercial Remodel Original MSRP $375 Heavy Duty/ High Traffic Dane Style Lever Handle Cylinder: 5 pinned cylinderG keyway standard Deadlatch: Q630-302 2 3 ⁄4" Backset with deadlatch, non-restoring 2 1 ⁄4" X 1 1 ⁄8" Square 1 ⁄2" Classroom Lock: Deadlocking latch bolt by levers. Outside lever is locked by key in outside lever. Inside lever is always free. High traffic, high abuse door openings demand a Grade 1 quality lock to keep doors secure. When quality and reliability are needed but cost is a concern, the certified ANSI/BHMA Grade 1 Falcon K Series can do the job. The Falcon K Series gets back to basics by offering the most common functions, lever styles and finishes at an affordable price. The K Series features conventional cylinders and small format interchangeable cores that are compatible with SFIC products from other manufacturers. Our conventional cylinders are available in all Falcon conventional key sections, as well as Schlage C keyway, which is now masterkeyed across the complete Falcon product line. ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1. UL: UL10C 3 hour A label. Door thickness: Adjustable 1 3⁄8" to 2 1 ⁄4". Comes set for a 1 3⁄4" thick door standard. Backset: 2 3⁄4" standard. 2 3⁄8" optional. Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting screws. Completely preassembled outer trim and inner spindle assembly are through-bolted both through and over chassis using four (4) screws to provide strength and resistance to loosening. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. Cylinder assemblies removable to rekey. Also available with 6 or 7-pin small format interchangeable core (SFIC) cylinders. Cylinder housings and plugs machined from solid brass. Springs are stainless steel. Two nickel silver keys furnished standard. Keyways: “G” keyway standard on conventional cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers–no inserts) material finished to match mating parts. Latches: 2 1 ⁄4" x 1 1 ⁄8" square corner with 2 3⁄4" backset comes standard; 2 3⁄8" backset option available if specified. Radius corners for both 2 3⁄8" and 2 3⁄4" backsets available if specified. All latches are UL listed and conform to both beveled and non-beveled doors. Strikes: 4 7 ⁄8" x 1 1 ⁄4" ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Key-in-lever cylindrical locksets shall be Falcon lock K Series or equal and meet the following requirements: § All locks shall meet the new ANSI/BHMA A156.2, Series 4000, Grade 1 for key-in-lever locksets. § Locksets shall be UL Listed (3 hour A Label). § Locksets shall be provided standard with a clutching lever design. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt. § Lever trim shall have individual torsion springs behind rose for lever return and to prevent lever sag. Trim shall be through bolted with four (4) screws to provide strength and resistance to loosening. Inner and outer trim shall “bottom out” to prevent door collapse. Roses shall be minimum of 3 1 ⁄2" diameter. § All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by allen-head set and lever catch to prevent tampering or vandalism. § Locksets shall adjust to fit door thickness from 1 3⁄8" to 2 1 ⁄4". § All locksets shall be non-handed and not require field disassembly for re-handing. § Preparation for door must be non-handed. § Cylinders to be secured by a dual retainer. We take our customer service very seriously, so if for any reason you are not satisfied with your purchase. Please contact us immediately before opening a return or eBay case. We will work with you to resolve the issue as quickly as possible.We love getting feedback and we enjoy giving it. Your satisfaction is the greatest reward for us and we do our best to meet our customers' needs. Please do not leave negative or neutral feedback before first allowing us the opportunity to resolve your problem.SHIPPING Please note that tracking/confirmation numbers are not good until the package has been scanned in by USPS and the information posts to their website. This can take up to 24 to 48 hours after you have received your shipping confirmation. Please feel free to message me with any questionsFLCBX

Price: 42.95 USD

Location: Draper, Utah

End Time: 2024-12-18T17:47:39.000Z

Shipping Cost: 0 USD