Enraged Rabbit Carrot Feeder (V2) (ERCF V2) Kit - (ERCF V2

Description: Enraged Rabbit Carrot Feeder (V2) (ERCF V2) Kit - (ERCF V2 - 8 Channel + ERCT + ERF + THS)) The current base kit comes without an MMB or ERCF Easy Board - we will be releasing a version with MMB included shortly. In the meantime, if you need an MMB you can head here to purchase one from us separately. Have an ERCF V1 and want to upgrade to the V2? We have you covered, check out our upgrade kit! West3D has partnered with TriangeLab to bring to you the ERCF V2, sourcing quality components at an affordable price, this kit currently represents one of the best and only products on the market. This project aims to bring multimaterial capabilities to 3D printers using a single Direct Drive toolhead. While this project is mainly dedicated to be used on VORON printers, it can also be used (or adapted) on any 3D printer that runs Klipper, and potentially RRF. Excerpt from GitHub: This is a community-born project and a major update to the Voron ERCF MMU that was started a couple of years ago by Ette. It is endorsed by Ette, and the guiding philosophy wasn't to start again with a new MMU design but to refine what has already proven to be a very capable machine and push it to be the best it can be by simplifying problematic construction, improving reliability and aligning as close as possible to v1.1 BOM. However, the project includes an all-new optional integrated filament buffer system (ERCT), filament cutter option (ERF), a collection of recommended tool head sensor modifications and a bit of Bling! It fully leverages the Happy Hare firmware MMU control software with Klipper Screen extensions. There is a rapidly growing list of MMUs in the marketplace, from the mass-produced "Fords" who pioneered the market to the "Toyota" that are more recent efficient engineering feat but somehow lacked soul. We consider ERCFv2 the "BMW" - a little over-engineered perhaps but distinctively cool, and you feel good driving it. We hope you enjoy it! For information regarding the current ERCF V2 project see here. For information regarding the former ERCF V1 see GitHub here. This listing comes with all the components (except for printed parts) to make your multi-material ERCF unit. For a detailed list of items included see below: V2: V1: Please note, there have been a couple upgrades since this posting. There are not 2 NEMA17 motors, and the stepper drivers have changed to TMC2226 :). * note these are shipping with upgraded tmc2226 drivers Enraged Rabbit Carrot Feeder (V2) (ERCF V2) Kit - (ERCF V2 - 8 Channel + ERCT + ERF + THS)) The current base kit comes without an MMB or ERCF Easy Board - we will be releasing a version with MMB included shortly. In the meantime, if you need an MMB you can head here to purchase one from us separately. Have an ERCF V1 and want to upgrade to the V2? We have you covered, check out our upgrade kit! West3D has partnered with TriangeLab to bring to you the ERCF V2, sourcing quality components at an affordable price, this kit currently represents one of the best and only products on the market. This project aims to bring multimaterial capabilities to 3D printers using a single Direct Drive toolhead. While this project is mainly dedicated to be uséd on VORON printers, it can also be uséd (or adapted) on any 3D printer that runs Klipper, and potentially RRF. Excerpt from GitHub: This is a community-born project and a major update to the Voron ERCF MMU that was started a couple of years ago by Ette. It is endorsed by Ette, and the guiding philosophy wasn't to start again with a new MMU design but to refine what has already proven to be a very capable machine and push it to be the best it can be by simplifying problematic construction, improving reliability and aligning as close as possible to v1.1 BOM. However, the project includes an all-new optional integrated filament buffer system (ERCT), filament cutter option (ERF), a collection of recommended tool head sensor modifications and a bit of Bling! It fully leverages the Happy Hare firmware MMU control software with Klipper Screen extensions. There is a rapidly growing list of MMUs in the marketplace, from the mass-produced "Fords" who pioneered the market to the "Toyota" that are more recent efficient engineering feat but somehow lacked soul. We consider ERCFv2 the "BMW" - a little over-engineered perhaps but distinctively cool, and you feel good driving it. We hope you enjoy it! For information regarding the current ERCF V2 project see here. For information regarding the former ERCF V1 see GitHub here. This listing comes with all the components (except for printed parts) to make your multi-material ERCF unit. For a detailed list of items included see below: V2: V1: Please note, there have been a couple upgrades since this posting. There are not 2 NEMA17 motors, and the stepper drivers have changed to TMC2226 :). * note these are shipping with upgraded tmc2226 drivers × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like AMBROSIA Über ABS Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools AMBROSIA ASA Galactic Filament of the Gods (Glitter / Sparkle) - 1KG Bambu AMS F AMBROSIA PETG Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Pre AMBROSIA PLA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Prem Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © West3D Printing Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Seller will pay for return shipping. eBay integration by

Price: 125.99 USD

Location: Beaverton, Oregon

End Time: 2024-03-10T20:04:34.000Z

Shipping Cost: N/A USD