Engine Jake Brake Adjustment Tool Feeler Gauge 4.6mm + 4.1mm for Detroit Diesel

Description: Fitments: Works on Detroit Diesel DD15 & DD16 engines built before HDE0077481 & DD13 engines built before HDE0079072. 1. DD15 & DD16 engines built before HDE0077481 use Engine Brake Adjustment tool W470589022300; set the lash to 4.1 mm (0.1614 in.). 2. DD 15 & DD16 engines built starting with HDE0077481 use Engine Brake Adjustment tool W470589042300; set the lash to 4.6 mm (0.1811 in.). 3. DD13 engines built before HDE0079072 use Engine Brake Adjustment Tool W470589022300; set the lash to 4.1 mm (0.1614 in.). 4. DD13 engines built starting with HDE0079072 use Engine Brake Adjustment tool W470589042300; set the lash to 4.6 mm (0.1811 in.). Feature: 1.W470589042300 4.6mm - 0.1811 in and W470589022300 4.1mm - 0.1614 in. 2.This angled feeler gauge to allow easier insertion between slave pistons contact surface with the exhaust valve adjusting screw. ( Straight feeler can be bent easily). 3.Fast, easy and accurate way to check the valve clearance with this feeler gauge. Getting the clearance adjusted is crucial not only for great performance but also to avoid any unwanted catastrophic failures or engine blows. 4. Advanced heavy duty steel process and black non-slip PVC coated handle, durability and anti-corrosion. Ultra-precise design meets the requirement of high precision and hardness and a much longer service life. DD13, DD15 & DD16 ENGINE BRAKE/ JAKE BRAKE LASH ADJUSTMENT STEPS 1. Set the lash on all the exhaust adjusting screws first (all the adjusting screws in direct contact with the exhaust valves). 2. Rotate the engine until a given cylinder is at maximum intake lift. When this is reached, the brake lash can be set on this cylinder. 3. When the engine brake rocker arm is in contact with the exhaust valve, set the lash between the engine brake rocker arm adjusting screw and the actuator piston stem. a. DD15 & DD16 engines built before HDE0077481 use Engine Brake Adjustment tool W470589022300; set the lash to 4.1 mm (0.1614 in.). b. DD 15 & DD16 engines built starting with HDE0077481 use Engine Brake Adjustment tool W470589042300; set the lash to 4.6 mm (0.1811 in.). c. DD13 engines built before HDE0079072 use Engine Brake Adjustment Tool W470589022300; set the lash to 4.1 mm (0.1614 in.). d. DD13 engines built starting with HDE0079072 use Engine Brake Adjustment tool W470589042300; set the lash to 4.6 mm (0.1811 in.). 4. Lash the engine brakes in the following firing order: 1, 5, 3, 6, 2, and 4. 5. Torque the locknut valve adjusting screw to 50 N·m (37 lb·ft). 6. Install the rocker cover. Package includes: 1x Engine Brake Adjustment Tool(4.6mm) 1x Engine Brake Adjustment Tool(4.1mm)

Price: 17.21 USD

Location: Chino, California

End Time: 2024-12-25T01:35:15.000Z

Shipping Cost: 0 USD