Elite Archery Mods Or Modules - Versa, V2, V3 and Smooth, Performance, 75% PAIR

Description: You are buying a pair of elite mods... a full set for your bow. Pictures are for illustration purposes. VERSA MODSThe Versa Mods are the originalTri Track Mod system that was used on the ASYM Tri Track Cam featured on the KURE, ENKORE, REMEDY, ENVISION, REZULT, REZULT 36. The Versa Mods will only fit on the ASYM tri Track cam system. Compatible bows: KURE, ENKORE,REMEDY, ENVISION, REZULT, REZULT 36. V3 MICRO MODS (V2 is older model of the v2)Elite’s 3rd generation of Versa Mods offer limitless customization. Easy sliding let off adjustment allows archers the ability to fine tune their holding weight anywhere within the 70-90% range. It has never been easier to adjust draw lengths precisely with ¼” draw length adjustment with the new V3 ModsCompatible bows: OMNIA, ERA, VERDICT PERFORMANCE MODSPerformance Mods are designedto maximize the energy being stored throughout the draw cycle. These Mods will deliver the highest speeds of the three and require the most energy to draw. The Performance Mods will carry the peak weight of the bow further into the draw cycle and may require a stiffer arrow spine due to the rate of acceleration of the arrow on the shot. The performance mods are ideal for someone who wants to maximize the performance and speed of their bow. The Performance Mods include an adjustable letoff with a range of 70% to a max of 90%. SMOOTH MODSalso known as “Standard” modson the early Versa systemSmooth Mods are designed withthe traditional “Elite” feel. The beginning of the draw force curve will mirror the performance mods, but the smooth mods will start to reduce peak weight around the middle of the draw cycle to allow a more gradual drop into the valley. As you are drawing the bow back you reach a point where you start to run out of strength, this is where the smooth mods start to drop off to provide a natural smooth draw from beginning to end. Smooth Mods are ideal for someone who is willing to give up a few FPS in exchange for an easy draw. The SmoothMods include an adjustable letoff with a range of 70% to a max of 90%. 75% MODS75% mods are designed toprovide more valley at higher holding weights. By designing the mods to max out the letoff at 75% we are able to deliver a more comfortable feel at full draw for those that want to increase their holding weight. The 75% mods will reduce peak weight early in the draw cycle to gradually decrease until you reach full draw. The Speed rating of the 75% mods will be slightly less than the smooth mods. These mods would be ideal for someone who wants to shoot a maximum of 75% letoff, and would like a bow that is easier to hold at the higher holding weights. The 75% Mods include an adjustable letoff with a range of 60% to a max of 75%.

Price: 99 USD

Location: South Bend, Indiana

End Time: 2024-04-10T22:18:34.000Z

Shipping Cost: 0 USD