Description: To the best of our knowledge all details listed below are deemed correct. It is the buyer's responsibility to confirmed prior to purchase. General Specifications per Manufacturer Bar Capacity: No Prep: 5mm to 44.5mm (.196" to 1.75") With Prep: 5mm to 51 mm (.196" to 2.000")Maximum Bar Length: 8'Minimum Bar Length: 39.4"Maximum Remnant Length: 16"Magazine Rack Capacity: 12"Bar Loading Cycle: 30 seconds for 12' barMaterial Straightness Specifications: .007"TIR/ft of material (V Blocks, 3 points equidistant)Feed Force (pusher torque): max 450N, adjustableFoward Feed Rate: 750 inches/min max, adjustableReturn Feed Rate: 1000 inches/min max, adjustablePower Consumption: 1.5kWOperating Voltage: 230V/60 Hz - 3 phaseControl Voltage: 24V DCOil Capacity: 57 liters (15 gallons)Oil Viscosity: ISO 150cSTCompressed Air Supply: 6 bar (90 psi)Compressed Air Consumption: approx. 8 liters/loading cycle Barfeed: 128" x 28" x 49" 2,100 lbs *Configured with a 42 mm Channel set*(additional channel sets available from OEM) *New Replacement $38K* *Originally on an Okuma Genos L400; should configure to almost all CNC Turning Centers*
Price: 7950 USD
Location: Longmont, Colorado
End Time: 2024-11-19T17:53:39.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Edge Technologies
Remnant Length: 16"
Control: Automatic
Model Year: 2011
Machine Type: Magazine Barfeed
Power Source: Electric
Capacity: 2"
Model: Patriot 551
Rack Capacity: 12"
Bar Length: 8'
