Description: Professional manometer gas pressure tester is specially used for gas measurement and calibration, gas pressure system troubleshooting, laboratory testing, maintenance and installation of blowers, clean rooms, boilers and other gas appliances. Manometer hvac is widely used in pressure detection of natural gas pipelines and air-conditioning refrigeration ventilation systems, gas, liquid and production industrial equipment pressure detection, etc. Features: ➤ 1.【Extra Large Measuring Range & More Hoses and Adapters】This latest generation digital manometer adopts an imported pressure sensor, measuring range: ±100Kpa. This manometer adopts high-precision ADC and low-power MCU design, accuracy: ± 0.3%FSO (25°C), measurement rate: 0.5s. The manometer comes with 4pcs 25cm/0.82ft hoses, 1pc 158cm/5.18ft hose, 1pc cone adapter, and 1pc 1/8-inch barb metal connector, these more accessories can meet more testing needs. ➤ 2.【Strong Magnet On Back & 12 Measurement Units & LCD Screen】Well-designed magnets on the back of the manometer can hold the meter in a good location, so your hands are free to make adjustments. 12 measurement units: mmHg, inHg, ftH2O, cmH2O, inH2O, Pa, KPa, mbar, bar, psi, Kgcm² and ozin². The 4.2CM×4.8CM large display screen supports LCD backlight, which can display clear data even in dark or weak light conditions. ➤ 3.【Measure Positive/Negative Pressure & Over-Range Reminder & Automatic Shutdown】The single channel of the manometer can quickly measure the current detection pressure value, while the dual channel can simultaneously detect the pressure difference between the two detection ports (P1-P2). Exceed the positive pressure range display Err0, Exceed the negative pressure range display Err1. If there is no operation for 15 minutes, the manometer gauge will automatically shut down to avoid wasting power. ➤ 4.【Maximum/Minimum Value and Lock/Clear/Store Data】This manometer gas pressure tester can calculate maximum and minimum values. Short press the hold button to lock and hold the current data value, long press the hold button for more than 2 seconds to clear the drift data. NOTE: Please long press the hold button if the data is not reset before measurement). The differential pressure gauge supports storing the currently measured pressure values (up to 100 groups) for viewing after the test. ➤ 5.【℉/℃ Unit and Wide Application】The temperature unit can be switched between ℃ and ℉ to meet different needs. This manometer can diagnose gas valves on furnaces or gas boilers, measure pressure in fumigation chambers, calibrate ERVs, measure static pressure in furnace ducts and across furnace filters of different restrictions, measure air pressure in HVAC systems, check the accuracy of the furnace pressure gauge, verifying water heater draft, testing micro-pressure in medical environments, etc. Support 12 Kinds of Measurement Units mmHg, inHg, ftH2O, cmH2O, inH2O, Pa, KPa, mbar, bar, psi, Kgcm² and ozin² Dual Tube ConnectorsIt can measure differential pressure with its dual input probes. Wide ApplicationsBest used for HV AC, pneumatic control, medical equipment, gas appliance service and installation, laboratory testing, computer peripheral. Hold/Record/Zero Data Specification:Measuring range: ±100Kpa/14.50PsiMeasurement unit: mmHg, inHg, ftH2O, cmH2O, inH2O, Pa, KPa, mbar, bar, psi, Kg/cm² and oz/in²Accuracy: ±0.3%FSO (25*C)Repeatability: ±0. 2% (Max ±0.5%FSO)Linearity/hysteresis: ±0.29%FSO (25°C )Measurement rate: 0.5sData storage: 100groupsMaximum pressure: 100kPaTemperature measurement: Switchable °C/°F unitAutomatic shut-down: After about 15 minutes without any operationExceed the positive pressure range display: Er0Exceed the negative pressure range display: Er1Working temperature: 0~50°C (32-122°F)Storage temperature: -10-60°C (14~140F)Power supply: 9V (included) Packing List:1pc * Main unit1pc * Barb metal connector (thread size: 1/8 inch)1pc * Tapered joint2pcs * 9.8inch hoses (OD: 1.57*2.36inch)2pcs * 9.8inch hoses (OD: 1.97*3.15inch)1pc * 59inch hoses (OD: 1.97*3.15inch)1pc * 9V battery1pc * Manual1pc * Carrying Bag
Price: 85.99 USD
Location: shenzhen
End Time: 2024-04-12T09:51:02.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Country/Region of Manufacture: China
Warranty: 3 year
MPN: Does Not Apply
Air Pressure Range: ±100Kpa/14.50Psi
Brand: CMTOOL
Accuracy: +0.3% FSO (25°C)
Indoor Temperature Measurement: Optional °C/°F unit
Measurement Unit1: Kpa, Psi, kgcm2, ozin2, Bar, mbar,inHg
Measurement Unit2: mmHg, inH2O,ftH2O, cmH2O, Pa
