Druzy Edge SHAKER Coaster Silicone Mold AU

Description: DRUZY EDGE SHAKER SILICONE COASTER MOLD Sent from Pacific Paradise Qld 4564 Australia This very unique silicone mold has a sparkling 'druzy crystal' sloping edge. The mold has an internal total depth of 14mm (0.56") with two 'steps' inside. These 'steps' create a space for your shaker pieces as well as a lip for the cover, with allowance for a resin topcoat. The shaker step is about 5mm (0.2") deep and the lip step is about 3mm (0.12") deep. Please see my YouTube tutorial on how to use this shaker coaster mold: https://youtu.be/2jWxLzKlo6M?si=jNG__U2iPJO3IA_7 Here is the link to my set of five acrylic discs: https://www.ebay.com.au/itm/335246688420?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=8z5JrDYMTZG&sssrc=2524149&ssuid=8z5JrDYMTZG&var=&widget_ver=artemis&media=MORE The finished coaster has a smooth inner center of 9.5cm (3.8"), perfect for a cup of tea. The outer edge measures 12.5cm (5") wide and 18mm (") high. This incredible shaker mold has a fine crystal effect sloping edge, giving the mold its unique and beautiful appearance. Fill the shaker cavity with crystals, seashells, dried flowers, pet hair or anything you like. The choices are endless. This high quality, white silicone mold has a very shiny surface. You will need about 120g (4oz) of resin for the shaker coaster and another 30g (1oz) for the lid. Please note that this is a handmade mold, made with love, not perfection and may have slight imperfections. NOTE: My silicone is heat resistant up to 120 degrees celscius (248 degrees fahrenheight). If you overheat the mold using your torch, you WILL melt the silicone and it will stick to the resin. This is not a fault with my mold, it is user error so please be careful using your heat gun or torch.

Price: 49 AUD

Location: Pacific Paradise

End Time: 2024-02-28T22:17:17.000Z

Shipping Cost: 16.32 AUD