Digital Manometer Differential Dual Port Input Air Pressure Meter HVAC Gas Gauge

Description: Description: Measurement range: ±2.000psi; Accuracy: ±0.3%FS ; Repeatability: ±0.25%FS ; Linearity/Hysteresis: ± 0.1% FS of full scale Two input ports - based on a dual port design, one for positive pressure testing and one for negative pressure testing, using these two ports together makes it easy to determine the air pressure differential. The air pressure tester comes with two 4mm diameter hoses and a standard 1/8" hose adapter and is suitable for testing and replacing gas valves on natural gas furnaces, diagnosing instantaneous water heaters, and measuring static pressure in piping, etc. Zeroing & Data Hold - "Zeroing" function is supported to clear remaining data and ensure accurate gas pressure readings are obtained. An essential tool for any HVAC technician checking airflow pressure, static pressure or pressure switches when installing and maintaining commercial air conditioning systems. Time Display & Data Record- This Manometer would be record 99pcs data with time stamp, which help to easier to view the maximum, minimum.and average values and analyze the data.Specification:Parameter:Accuracy:±0.3%FSLinearity/hysteresis:± 0.1% FS of full scaleLimit maximum pressure:6PsiRepeatability:±0.25%FSAutomatic shutdown:About 25 minutesPressure connection:One 1/8 "(3.18 mm) quick connectorOperating temperature:0~40℃Storage temperature range:-10~60℃Over-range prompt:ERR1 or ERR2Working power supply:Two AAA batteries(NOT included)Weight:134gSize:160*62*31mm Display DescriptionPressure display valueData hold functionRecording modeMaximum, minimum and averageLow battery promptDifference value displayUnit displayTime display Measuring range: Unit:Range / ResolutioninH20: ±55.40 / 0.01Psi: ±2.000 / 0.001Mbar: ±137.8 / 0.1kPa: ±13.79 / 0.01inHg: ±4.072 / 0.001mmHg: ±103.4 / 0.1Ozin2: ±32.00 / 0.01ftH20: ±4.612 / 0.001cmH20: ±140.6 / 0.1Kgcm2: ±0.140 / 0.001Bar: ±0.137 / 0.001Delivery: 1 x Gas pressure gauge 4 x Tube 500mm 1 x thread 3.1/8" Key Description: 1. Turn on/off button 2. Data hold button 3. Unit conversion function button 4. Backlight button 5. Record button 6. Difference value button Buttons Operation:1.Power on/off Button: Short press to turn on or off, long press to select whether to turn off automatically, and press HOLD to select ON or OFF. ON means automatic shutdown is on (automatic shutdown time is about 25 minutes), and OFF means automatic shutdown is off. 2.HOLD Button Power on status:Short press is the data holding function. At this time, the "HOLD" symbol will appear on the display, and then short press to cancel the holding function. If there is a base number before measurement, press and hold it for more than 5 seconds, the display of the screen will show “---”, and the instrument is reset to zero. 3.UNITS Button Power on status:Unit conversion function. Press this button to cycle between units, Bar,mmHg,Ozin2,Kgcm2,Psi,inH2O,kPa，ftH2O,inHg,cmH2O,Mbar. 4.DIF Button Power on status: Difference value button, the pressure value after pressing the button minus the pressure value before pressing the button. 5.RFC Button on status: Press the button for a short time to enter the recording mode, and press and hold button for 5 seconds to exit the recording mode. In the recording mode, continue to press the button briefly to view the maximum, minimum and average values recorded in the measurement. Other functions cannot be operated. 6.LIGHT Button on status: Press this button once to turn on the backlight, and press it again to turn off the backlight, or the backlight will turn off automatically after 30 seconds.

Price: 39.89 USD

Location: Rancho Cucamonga, California

End Time: 2024-09-13T03:44:27.000Z

Shipping Cost: 0 USD