Dental Lab Equipment Metal Centrifugal Casting Machine with Cradles and Tongs

Description: Dental Lab Centifuge Casting Machine This centrifugal casting machine is indispensible for the production of high quality oral restorations. Durable and reliable, our casting apparatus easily handles most alloys with high melting-points that are used by dentists. Cast denture frames, inlays, and crown bridges with ease! This item features a heavy duty spring and an adjustable balance mechanism and comes with 3 cradles and a pair of tongs.Product size:37x37x27cmPacking size:40x23x23cmWeight:6kgMaximum rotation diameter:360mmMaximum spring torque:150NMaximum eccentric weight:1.25kgMaximum mold diameter:78mmProduct Details Packing ListMain unit x1 manual x1 Long handle tongs x1 Cradles (large, medium, small) x33 cradles (large, medium, small): For mold placement Long handle tongs: Used to transfer crucible or mold, 36.6cm longJT-08 Centifuge Casting Machine Usage● The centrifuge uses the elastic force of metal spring to drive the horizontal bar to rotate through the central shaft to generate centrifugal force. One end of the horizontal bar is provided with a crucible and a support for fixing the mold, and the other end is equipped with a metal mound for balancing. Before casting, loosen the central screw on the horizontal bar and fix a mold on the bracket. After adjusting the balance, tighten the screw and remove the mold. Then rotate the horizontal rod clockwise for about 3-5 turns to tighten the spring, and then lift the jack post to fix the horizontal bar temporarily. ● During casting, the casting alloy is placed in the crucible, and then the roasted mold is fixed on the bracket. The opening of the casting mold is facing the crucible hole. The device with flame is used to heat the casting gold, and the alloy is fully melted. At this time, the left hand supports the metal mound of the horizontal bar, and gently moves the horizontal bar to make the kilogram column fall down. At the same time, the flame is turned away. Due to the spring force of the horizontal bar, it rapidly rotates in the counter clockwise direction, and the molten gold in the crucible is thrown into the mold cavity under the action of centrifugal force to complete the casting. Notice● Pay attention to the table is fixed firmly and the crucible is placed correctly. ● The working table must be equipped with good protection device to prevent molten metal from splashing out during operation, which may harm human body. ● During operation, pay attention to the inertia of spring tightening, and strictly prevent hand smashing. ● Keep the equipment clean and dry, clean the equipment and remove the residue after casting.

Price: 109 USD

Location: tianjinshi

End Time: 2024-02-21T07:38:30.000Z

Shipping Cost: 75 USD