Dental Cordless LED Curing Light 1 Second Cure Lamp

Description: Dental Cordless iLed Curing Light 1 Second Cure Lamp 2300mW Woodpecker DTE Style 2 ColorIntroduction:1.Technical specifications1.1Dimensions: 25mm×25mm×240mm1.2 Net weight: 280g1.3 Power source1.3.1 Power supply: rechargeable Lithium battery1.3.2 Battery mode: ICR 184901.3.3 Battery voltage and capacity: 3.7V/ 1400mAh,Battery has protection against Over-voltage, over-current and short circuit.1.3.4 Adapter Power Input: 100V to 240V, 50Hz/60 Hz Input Power: 10VA Power Output: DC5V/1A1.4 Light source:1.4.1 5W high power blue light LED1.4.2 Checking method: the LED light is fine when the light is on during operating correctly.1.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M, etc.1.4.4 Wave length: 440nm-480nm1.5 Light intensity:P1 mode 2200-3200mW/cm2P2 mode 1600mW/cm2~2200mW/cm2P3 mode 1200mW/cm2~1600mW/cm22. Operation2.1 Press the mode button. Following two modes are available.2.1.1 TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 3200mW/cm22.1.2 NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 2200 mW/cm22.2 During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound, the curing light radiates blue light and starts working according to the set modes. Meanwhile, it starts counting down and will produce tone at every 5 seconds, it stops working when counting down to "0".2.3 During operation, the blue light can be stopped by press the power button at any time.2.4 After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times.2.5 Low power detective circuit is fixed inside of the main unit, when low power is detected, the display screen of main unit will wink, please charge in time.2.6 When the battery needs to be charged, connect the plug of the adapter into the AC100V~240V power supply. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, and then the logo turn to blue. Put the main unit to the charging point of the pedestal, the display screen turn to scrolling display, and the curing lights starts charging. 2.7 After operating, take off the disposable sleeve and throw away, forbidden to reuse.2.8 This equipment will turn off automatically if don't any action within 2 minutes, turn it on by press any button.2.9 The depth of solidification of composite is no less than 2mm per 1 second.Material:The handle is made of plasticThe lamp holder is made of metal **********************************************Woodpecker DTE Style iLed WhiteDental High Power Wide Spectrum LED Curing Light 2300mW/cm²Technical Parameters:Light Source: Broad Band LED;Wavelength Range: 385 - 515 nm;Light Intensity: > 2300mW / cm²;Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);Power Adapter Input Power: AC 100-240V 50 / 60Hz;Charging time: about 45 minutes;Size:Handle: Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm (all of the above are the largest size)Weight: Handle: 96 grams; Charging seat: 99 grams;Operating ambient temperature: + 10 - + 40(+ 50 °F - + 70°F);Operating relative humidity: 30% - 75%;Operating environment pressure: 700hPa - 1060hPa;Package Contents:1 × host handle;1 × charging base;1 × power adapter;1 × user manual.Operation and function description:The entire handle is only one button, light built-in button.1. For the first time, charge the light curing handle first. Plug the USB cable of the charger into the USB port of the power adapter, plug the power adapter into the power socket, and finallyPut the handle on the charging stand; or, insert the USB cable plug of the charging stand into the USB port of the computer, and then put the handle on the charging stand. Charging instructions are as follows:| Emerald Flashing | Battery charging;| Emerald green light | battery fully charged; handle removed the charging seat, the restoration of the previous working mode.2. Working mode selection, by pressing the button for 2 seconds to release to switch the working mode.| Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW / cm².| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²3. Turn the light curing lamp on and off, press the button briefly.4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby. Feedback We commited ourselfs to your 100% satisfaction both with our goods and services.• Please leave me FIVE star POSITIVE feedback if you are satisfied with our items.• Please CONTACT me immediately before leave us neutral feedback or negtive feedback, We will try our best to resolve any problem for you untill you are satisfied. Shipping 1. We will send out your orders in one day as soon as we receive your payment.2. Delivery ways: TNT, DHL, YANWEN, EMS, USPS, China POST,etc.3. Delivery time:10-15 days to USA, 20-30 days to UK, Germany, French, Australia, Canada, etc, Over 30 days to other countries. Payment We accept PayPal and bank wire transfer. All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it. Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation.Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Returns If the item you received is damaged or defective,Please contact us immidately.We will free exchange or refund.We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts. Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding! Contact Us We're one of the largest online dental suppliers based on many qualified manufacturers in china. If you contact us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped. Any help,need or questions, please do not hesitate to contact us. Looking forward to our friendly & win-win cooperation!

Price: 65.78 USD

Location: shenzhen

End Time: 2024-11-24T02:46:01.000Z

Shipping Cost: 0 USD