Description: Feature： DC Overload Protector used for overcurrent protection, short circuit protection, motor blocked protection, auto-stop overload protection. The input voltage is DC 6V-28V. Output current: 8A max (resistance load); 5A max (motor load) The Protected Delay Time: 0-20s The Current Limitation: 0.2A-10A The Reset Time: 1-600s (automatic mode) Include Power-on LED and current-limit-protected alarm LED. Operating instruction: Before you attempting to wire the protector, make sure power is off. WARNING: DO NOT REVERSE POSITIVE AND NEGATIVE POWER LOADS.THIS WILL DAMAGE THE CONTROLLER. 1. Connect wires refer to the "wiring diagram" (NO. n picture). 2. Install the jumper to"Auto" or "Manual" modes. (Default is automatic mode.) 3. Set parameters of Current Limitation, Delay Time and Reset Time (Feature：DC Overload Protector used for overcurrent protection, short circuit protection, motor blocked protection, auto-stop overload protection. The input voltage is DC 6V-28V. Output current: 8A max (resistance load); 5A max (motor load)The Protected Delay Time: 0-20sThe Current Limitation: 0.2A-10AThe Reset Time: 1-600s (automatic mode)Include Power-on LED and current-limit-protected alarm LED. Operating instruction: Before you attempting to wire the protector, make sure power is off. WARNING: DO NOT REVERSE POSITIVE AND NEGATIVE POWER LOADS.THIS WILL DAMAGE THE CONTROLLER. 1. Connect wires refer to the "wiring diagram" (NO. n picture). 2. Install the jumper to"Auto" or "Manual" modes. (Default is automatic mode.)3. Set parameters of Current Limitation, Delay Time and Reset Time (automatic mode).4. Turn on the power. Current Limit Adjustment: When the red alarm LED is lighting, eliminate the overcurrent factors, it will automatic reset (automatic mode), or push the Reset Button, reset the power (Manual Mode). Reset the current limitation pot should as follow:1. Turn off the power.2. Adjust the Current Limitation pot until the desired maximum current is reached. 3. Reset the power. Package Including: 1 x DC Current Overload Protector
Price: 9.46 AUD
Location: 深圳
End Time: 2024-10-07T10:10:32.000Z
Shipping Cost: 6.71 AUD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Return policy details:
Brand: Unbranded
MPN: Does Not Apply
Power Source: DC
