Description: Type: 3/4″ x 3/4″ National NTEP approved, NSF61 Certified Lead-Free Potable Water Meter, 3/4″ NPT Couplings at both ends, with Pulse Pulse/Reed Switch Output, measured in Cubic Feet, Multi-Jet.Model: DAE MJ-75SfMount: Horizontal Inline mount with dial facing upwards. For installing vertically with water flowing upwards, please refer to DAE PD-75, which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards. Not for use of pit application. For outdoor use, please refer to DAE MJ-75c, PD-75.Unit: Cubic FeetAccuracy: +/-1.5% within normal flow rate range as per AWWA StandardPulse output: 0.1 cu ft/pulse, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The switch may be damaged if input electricity is more than 0.01A, 24V. We shall not be responsible with the result if connecting to third party device which is not certified by DAE.Meter body: NSF61 Certified Lead-Free BrassLength without couplings: 190 mm (7.5 inches), Length with couplings: 292 mm (11.5 inches)Item dimension: 190 mm (7.5″) length, 98 mm (3.86″) wide, 117.5 mm (4.63″) height. Weight: 2.27 kg (5 lbs)NSF61 Certified Lead Free Couplings IncludedMax. Reading: 999,999.999 cu ft, Min. Reading: 0.001 cu ft. The 1st digit from the right has a multiplier of 10 cu ft. For example, if you see 01234 on the digits, it is 12340 cu ft. The 1st dial under the digits is in cu ft . The 2nd dial under the digits has a multiplier of 0.1.Max. working pressure: 1.6 Mpa (232 psi), exceeding the requirement from AWWA standard 150 psi.Max temperature: 122˚F (50˚C)Pressure drop: 0.58 psi @ 40 cu ft/h (5 GPM), 1.96 psi @ 80 cu ft/h (10 GPM)Conforms to ISO 4064, AWWA C708, for clean water only.Safe Maximum Flow Rate: 241 cu ft/h (30 GPM), Recommended Maximum Continuous Flow Rate: 120 cu ft/h (15 GPM), Minimum Test Flow Rate: 4 cu ft/h (0.5 GPM), Normal Test Flow Limits: 16 – 241 cu ft/h (2-30 GPM)Bore diameter: 0.88 inch (22.3mm)National NTEP approval in accuracy, and repeatability as tested by Utah Water Research Lab. It applies to all the states including California who accepts both NTEP or CTEP. If you have to send meters to CA County for testing prior to installation, DAE MJ-75Sf 3/4″*3/4″ meter is the right choice since CA tests 5/8″*3/4″ meter with the criteria of 3/4″*3/4″ meter. Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act.Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy is required. Just connect wires as per a simple picture (or video https://youtu.be/vCu8NIdj9p0) & ready to go.Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT , an inexpensive remote reading solution, to read the water meter usage remotely on the electrical pulse counter. Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading. CO-10 or AMR130 will be purchased separately. Conforms to both AWWA C700 and ISO 4064 Class C. for City water only.Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.1 DAE CC2030 KIT Gateway + 1 AMR130AN KIT can read 1 water meter with pulse output (like DAE AS200U-75P, MJ-75, PD-75, V-75P, VM-75P and WP-300P) remotely with cell phone, PC and generate billing report. One CC2030 Gateway can monitor 20 meters (water, electricity, and gas).For existing building, hard to draw cable between AMR130AN (close to 1 water meter) and CC2030 (close to your router), please choose 1 AMR130-RN KIT + 1 CC2030 KIT + 1 WSC500 RF Converters to connect them wirelessly.For monitoring up to 16 water meters remotely with cell phone, PC and generate billing report, you will just need 1 AMR KIT + 1 CC2030 KIT.You must have Non-Return-Valve in your piping system, or the reading of CO-10, Cell phone/PC may be more than the reading of water meter due to the backflow. Please install one or refer to Non-Return-Valve (like NRVAS-75 for AS200U-75P) in DAE Controls Website, an in-expensive backflow prevention valve to be installed at the outlet of water meter.To securely transfer metering data for DAE Cloud Metering Solutions on Water, please use UL2464 cable to extend connection between water meters (have about 4 ft pulse cable) and AMR130AN or reading of Cell phone/PC may be more than the reading of meter due to exterior interference. With UL2464 cable, connection between meter, AMR130AN can be extended at least 328 ft, and at least 2000 ft between CC2030 and AMR130AN.Warranty: 2 yearsFor the buyers outside of USA, in addition to the tax, the carriers may charge brokerage fee.
Price: 95.95 USD
Location: Troy, Michigan
End Time: 2024-09-01T12:12:01.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Non-Domestic Product: No
Brand: DAE Controls
Custom Bundle: No
Model: MJ-75Sf
MPN: MJ-75Sf
Country/Region of Manufacture: China
Modified Item: No
