Curly Maple Telecaster neck blank USA made (can be used as a template)

Description: ONE Piece Curly Maple Telecaster neck blank made in the USA. Blank has been routed to the outer contour with a truss rod channel cut. Can also be used as a template.*(Wenge also available please PM for a price quote)* The blank is FLAT on both front and back and will require carving by the end user. - .75" Thick will require a fingerboard.- Flat or Rift Sawn.- TR Channel cut for 18" Hot Rod Low Profile 2 Way Rod(.25"w x .375"d) - Wood grain and color may vary slightly from photos. !!!Check my other listings!!! This is a bare wood item NO protective coating aka “finish”, paint lacquer oil shellac sanding sealer or otherwise, has been applied. All sanding involved necessary to prep the surface prior to applying the finish of your choice is the responsibility of the buyer. Front and back outer most surfaces, i.e. faces, will be sanded to 100 grit prior to shipping. All sides, cavities, pockets, etc., may require additional sanding. As wood naturally varies from piece to piece grain patterns and color can vary slightly from photos. Normal 0 false false false EN-US X-NONE X-NONE *Telecaster and Tele are registered trademarks of Fender® Musical Instrument Corporation. This item is NOT made by Fender. JBL Instruments is in no way affiliated with Fender® Musical Corporation or any other musical instrument manufacturer in any way.

Price: 60 USD

Location: Paris, Illinois

End Time: 2025-01-06T09:17:49.000Z

Shipping Cost: 0 USD