CRL Satin Chrome Vienna 037 Series Wall Mount Hinge V1E037SC

Description: Accommodates 3/8" to 1/2" (10 to 12 mm) Glass.Wall Mount Full Back Plate Standard Model (Factory Set for Standard Closing Position).Use Monolithic Tempered Glass.CRL Vienna Hinges are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Vienna Hinge to be used with it's own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it's own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular shaped, square cornered cut-outs.STANDARD REVERSIBLE PIVOT PIN: Each Vienna Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Vienna Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.Using two hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm).Using three hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum door width of 36" (914 mm). SPECIFICATIONS:Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety GlassConstruction: Solid BrassHinge Swings: 90 degree In and 90 degree OutClosing Type: Self-Centering when within 15 degree of closed position.Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Price: 50 USD

Location: Schaumburg, Illinois

End Time: 2024-02-23T20:40:44.000Z

Shipping Cost: 14.25 USD