Crestron AMP-2210T Professional Audio Amplifier 2x210W

Description: Crestron® AMP-series Commercial Power Amplifiers provide a perfect combination of high output and efficiency for all types of professional audio applications. 100% Crestron engineered and built, these amplifiers are ENERGY STAR® qualified to enable organizations to fulfill their green initiatives without compromising on audio performance. Advanced design features include a high-efficiency amp topology with active power factor corrected power supply, delivering a generous amount of power in a space-saving 1U rack-mountable chassis.2-Channel Universal DesignThe AMP-2210T provides two independent channels of amplification with configurable outputs to suit a wide range of system designs. Each channel is configurable via a simple selector switch to handle either low-Z or constant-voltage speaker systems. Each channel is rated for 210W @ 4Ω, or 120W @ 8Ω, 70V, or 100V. Additionally, the two channels may be bridged together to deliver a robust 420W @ 8Ω to a single load. The 70/100V outputs are transformer isolated to handle long and complex wire runs.ENERGY STAR® QualifiedIts ultra-efficient design allows the AMP-2210T to meet demanding ENERGY STAR qualification requirements, affording a cost-reducing solution for everything from boardrooms and auditoriums to paging and background music systems. Auto power-down places the amplifier into a low-power standby state if no input signal is detected for 30 minutes. The amplifier quickly powers back on the instant an input signal is detected. In addition, each amp channel can be independently enabled or disabled via jumpers or remote contacts, reducing power consumption by shutting down individual channels when they are not needed. Whether switched remotely or through an AC power controller, the AMP-2210T draws no added inrush current during power-up, reducing AC circuit requirements and potentially eliminating the need for extra power sequencing equipment.Professional System IntegrationThe AMP-2210T includes professional balanced inputs with rear-panel ±10dB input level adjustments to assure compatibility with a wide range of audio sources. Remote power control is enabled for each channel using external contact closures, switches, or control system relays. All input, output, and remote control connections are facilitated via detachable screw-terminal connectors to simplify installation and servicing.Cool and CompactThe AMP-2210T features a durable, lightweight chassis that may be placed on a shelf, or rack-mounted using the rack ears provided. At only one rack space high and under 15 inches deep, it is ideal for installations requiring a lot of power in a limited space. Its efficient, cool-running design gives off substantially less heat than comparably rated amplifiers. Convection cooling means there are no noisy fans, allowing the AMP-2210T to be installed in a boardroom lectern or credenza without affecting noise levels.Rugged and DependableAll AMP-series amplifiers are designed for ultimate dependability in a wide range of commercial environments. Built-in over current and DC offset protection on each channel helps prevent damage to the amplifier and speakers due to external or internal faults. Discrete thermal protection is also provided on each channel and the power supply. Front panel indicators are provided for each channel to show signal presence, clipping, and fault conditions. Key FeaturesENERGY STAR® qualified power amplifierUltra-efficient space-saving designLow total cost of ownershipHigh-output power, low noise, low distortion performanceEach channel selectable for 4/8Ω, 70V, or 100V operationTwo channels each rated 210W@4Ω, 120W@8Ω, and 120W@70/100VTransformer isolated 70 and 100 Volt outputsBridgeable for 420W@8ΩIndividual channel power control via jumper or remote contactAuto power-down after 30 minutes of no signalInstant auto power-on when an input signal is detectedNo inrush current during power-upOver current and DC offset protection per outputThermal protection on the power supply and each channelFront panel signal, clip, and fault indicators per channelProfessional balanced inputsDetachable terminal block connectorsRear panel ±10dB input level controlsConvection cooled - no noisy fansSingle-space 1U rack mountableUnder 15 inches deepUniversal power supply with active power factor correction**ITEM REOVED FROM A WORKING ENVIRONMENT**

Price: 149.99 USD

Location: Schenectady, New York

End Time: 2024-11-09T18:34:09.000Z

Shipping Cost: 21 USD