Creality Hotend kit for Sprite Extruder / Ender 3 S1 / CR10 Smart Pro

Description: Creality Hotend kit for Sprite Extruder / Ender 3 S1 / CR10 Smart Pro Original Creality Replacement Hotend Assembly For Ender 3 S1 Pro for Ender 3 S1 / Ender 3 S1 Pro, CR10 Smart Pro Hot tightened at factory, but we do recommenced you re-tighten nozzle again, you need to re-tightened at +10-20c your regular printing temperature (example 280c for all metal version) or at max temperature of support hotends when you change the nozzle. Documentation: https://support.dremc.com.au/en/support/solutions/articles/51000318231-how-to-hot-tighten-nozzle-change-a-nozzle How Replace Hotend: https://support.dremc.com.au/en/support/solutions/articles/51000365933-how-to-replace-ender-3-s1-series-sprite-extruder-hotend Standard Kit: Stainless Steel Heat Break (PTFE LINED Heat Break) Brass Nozzle 0.4mm 24V 40W Heater Stainless Steel + PTFE Lined Heat Break All Metal Kit: Titanium Alloy Heat Break (All Metal Heat Break) Brass Nozzle 0.4mm 24V 50W Heater Titanium Alloy Heat Break High Temperature Pro Kit: Chrome Copper + Titanium Alloy (All Metal Heat Break) Copper Plated Nozzle 0.4mm 24V 50W Heater Copper + Titanium Alloy Heat Break All kits include retaining bolts, sock and respective thermistors. Support Printers/Upgrades Kits Ender 3 S1 Ender 3 S1 Pro CR-10 Smart Pro Creality Sprite Extruder Note: For printing extensive abrasive filament printing such as Carbon Fibre/Glass filled filament, please use the All Metal Kit (All Metal) with hardened steel nozzle- 4001030113 instead of the bi-metal hotend (Pro Kit). During our testing, we found the bi metal hotend does not last long before abrasive wear at the bi metal heat break. Note: Please check compatible table in second image, please also note this is not compatible with Sermoon Printer as the Heater/thermistor due to different cable length and connector but rest of hotend is compatible, so you are required to remove existing heater/thermistor or extend wiring before install. If you need Sermoon variant hotend: https://store.dremc.com.au/products/hotend-kit-for-sermoon-v1-pro-sprite-extruder Note: These are direct hot-swap replacement, thermistor is not replaceable, if you need replaceable heater blocks, please see below options: Aluminum Heater Block / Copper Heater Block [Require self assembly and does not include retaining blocks] similar you can source any MK8 nozzles or CR-6SE/sprite Specific for stock silicon sock. Heat Break options available in copper+titanium alloy. *Suitable for Sovol 6 Heater and heat break is not suitable, you will need re-crimp to smaller JST PH 2.0 Connector, or using existing heater wire and using existing heat break. Creality Hotend kit for Sprite Extruder / Ender 3 S1 / CR10 Smart Pro All Prices include GST. Message us if require a tax invoice. Original Creality Replacement Hotend Assembly For Ender 3 S1 Pro for Ender 3 S1 / Ender 3 S1 Pro, CR10 Smart Pro Hot tightened at factory, but we do recommenced you re-tighten nozzle again, you need to re-tightened at +10-20c your regular printing temperature (example 280c for all metal version) or at max temperature of support hotends when you change the nozzle. Documentation: https://support.dremc.com.au/en/support/solutions/articles/51000318231-how-to-hot-tighten-nozzle-change-a-nozzle How Replace Hotend: https://support.dremc.com.au/en/support/solutions/articles/51000365933-how-to-replace-ender-3-s1-series-sprite-extruder-hotend Standard Kit: Stainless Steel Heat Break (PTFE LINED Heat Break) Brass Nozzle 0.4mm 24V 40W Heater Stainless Steel + PTFE Lined Heat Break All Metal Kit: Titanium Alloy Heat Break (All Metal Heat Break) Brass Nozzle 0.4mm 24V 50W Heater Titanium Alloy Heat Break High Temperature Pro Kit: Chrome Copper + Titanium Alloy (All Metal Heat Break) Copper Plated Nozzle 0.4mm 24V 50W Heater Copper + Titanium Alloy Heat Break All kits include retaining bolts, sock and respective thermistors. Support Printers/Upgrades Kits Ender 3 S1 Ender 3 S1 Pro CR-10 Smart Pro Creality Sprite Extruder Note: For printing extensive abrasive filament printing such as Carbon Fibre/Glass filled filament, please use the All Metal Kit (All Metal) with hardened steel nozzle- 4001030113 instead of the bi-metal hotend (Pro Kit). During our testing, we found the bi metal hotend does not last long before abrasive wear at the bi metal heat break. Note: Please check compatible table in second image, please also note this is not compatible with Sermoon Printer as the Heater/thermistor due to different cable length and connector but rest of hotend is compatible, so you are required to remove existing heater/thermistor or extend wiring before install. If you need Sermoon variant hotend: https://store.dremc.com.au/products/hotend-kit-for-sermoon-v1-pro-sprite-extruder Note: These are direct hot-swap replacement, thermistor is not replaceable, if you need replaceable heater blocks, please see below options: Aluminum Heater Block / Copper Heater Block [Require self assembly and does not include retaining blocks] similar you can source any MK8 nozzles or CR-6SE/sprite Specific for stock silicon sock. Heat Break options available in copper+titanium alloy. *Suitable for Sovol 6 Heater and heat break is not suitable, you will need re-crimp to smaller JST PH 2.0 Connector, or using existing heater wire and using existing heat break. HAVE A QUESTION OR CONCERN? If you need more information regarding this item, please message us or check on original manfuacturers websites. DREMC STORE back our products and pride ourselves, not only in quality but in genuine products. Please do not hesitate to reach out to us. We stock the largest range of 3D Printer Spares Parts, from Manufacturer such as E3D-Online, Creality, Slice Engineering, Bondtech, Micro Swiss, LDO Motors, Bigtreetech, Trianglelabs to name a few. We are the largest Australia Creality Spare Part Distributors based in Brisbane, we stock over 200 SKUs Creality Printers spares parts. Our website store.dremc.com.au for latest stock list and accurate real time stock counter, no hidden stock levels. Do you need bulk spare parts or DREMC / Polymaker filament discount? Message us now if you require B2B/Educational payment terms. Please check out our feedback to see what others are saying about us. × × × × × Tell a friend Visit store Watch now Postage info Click the Postage tab above the listing description for more info Click the Postage tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL/CARD Please refer to eBay Checkout for available payment method. Price include GST. Message us if require a tax invoice. Additional Information No additional information at this time Ask seller a question You might also like BIGTREETECH SKR MINI E3 V3.0 32 Bit Control Board for Ender 3 Series Ender 5 Official Creality CR-6 Series (CR-6 SE, CR-6 Max, CR-10 Smart) Control Mainboard Trianglelab CR6 SE Titanium alloy Bi-Metal Heat break For CR-6 SE Ender 3 Neo Creality Ceramic Bi-Metal Hotend for Ender 3 S1 CR10 Smart Pro Sprite Extruder Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © DREMC STORE Postage Click the Postage tab above the listing description for more info Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 57.95 AUD

Location: Brisbane

End Time: 2024-01-28T11:09:38.000Z

Shipping Cost: 17.06 AUD