Cooler Master NR200 NR200P ATX PSU Power Supply Front Mounting Bracket MasterBox

Description: 3D printed Cooler Master ATX Front Mounting Bracket for the NR200 and NR200P cases. This is printed after Cooler Master's design taken from here:https://www.coolermaster.com/catalog/cases/mini-itx/masterbox-nr200/ORhttps://www.coolermaster.com/catalog/cases/mini-itx/masterbox-nr200p/ It's the same 3D model for both the NR200 and NR200P cases. Please look at the 2nd photo for an illustration of the difference between low and high mount. The difference between high and low mounts is that low ends up about 30mm lower than the high would and then your PSU sticks out somewhat further depending on how tall it is. Another is that the high mount doesn't allow top mounted fans above it to be mounted. To check fit between high/low, you can position your PSU in the case with the power plug side facing up and level with the screw holes on the side of the case that the bracket goes into. That would be what high mount looks like. Then shift it 30mm down and that is what low mount would be like. Printed on demand for you in several colors and either the high or low mount option they provide. GET THE MAGENTA COLOR - OVER $3 CHEAPER AND IT'S A GREAT LOOKING COLOR ON BLACK!! PLEASE LOOK AT COOLER MASTER'S SITE LINKED ABOVE AND ALL THE PICTURES TO MAKE SURE YOU UNDERSTAND THE DIFFERENCE BETWEEN HIGH AND LOW MOUNT. Brackets in high and low are not pictured for all colors. Pictures are representative of the item you will receive.

Price: 22.99 USD

Location: Stamford, Connecticut

End Time: 2024-08-17T23:52:55.000Z

Shipping Cost: N/A USD