Cisco Catalyst C3850 WS-C3850-48P-S 48-Port PoE Gigabit Ethernet Managed Switch

Description: TESTING & COSMETIC NOTES: This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING The unit has been reset to the factory default settings. See console log below. Power cords not included.COMPONENTS INCLUDED IN THIS AUCTION: • (1) - CISCO CATALYST C3850 WS-C3850-48P-S 48-PORT POE GIGABIT ETHERNET MANAGED SWITCH • (2) - CISCO 1100W POWER SUPPLYREPLACEMENT or MONEY BACK GUARANTEE: When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.ADDITIONAL INFORMATION: Booting...Interface GE 0 link down***ERROR: PHY link is downThe "IP_ADDR" environment variable is not set.Getting rest of imageReading full image into memory...Check base package header ...: done = 16384Getting rest of imageReading full image into memory....doneReading full base package into memory...: done = 32795564Bundle Image--------------------------------------Kernel Address : 0x537783c4Kernel Size : 0x4381df/4424159Initramfs Address : 0x53bb05a3Initramfs Size : 0x1ab5e09/28007945Compression Format: mzipBootable image at @ ram:0x537783c4Bootable image segment 0 address range [0x81100000, 0x81da5280] is in range [0x80180000, 0x90000000].@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 623Loading Linux kernel with entry point 0x81895bf0 ...Bootloader: Done loading app on core_mask: 0xf### Launching Linux Kernel (flags = 0x5)Linux version 4.9.187 (sumikum7@sjc-ads-5670) (gcc version 5.3.0 (GCC) ) #1 SMPFri Nov 19 03:09:46 PST 2021CVMSEG size: 2 cache lines (256 bytes)Cavium Inc. SDK-5.1.0bootconsole [early0] enabledCPU0 revision is: 000d900a (Cavium Octeon II)Checking for the multiply/shift bug... no.Checking for the daddiu bug... no.%IOSXEBOOT-3748f25d3076de52df7db2641f93e50c-new_cksum: (rp/0): 4%IOSXEBOOT-3748f25d3076de52df7db2641f93e50c-saved_cksum: (rp/0): 4Final tar file: mcu_ucode_bundle_6_2_0.tarBoth links down, not waiting for other switchesSwitch number is 1 Restricted Rights LegendUse, duplication, or disclosure by the Government issubject to restrictions as set forth in subparagraph(c) of the Commercial Computer Software - RestrictedRights clause at FAR sec. 52.227-19 and subparagraph(c) (1) (ii) of the Rights in Technical Data and ComputerSoftware clause at DFARS sec. 252.227-7013. Cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.12.7, RELEASE SOFTWARE (fc2)Technical Support: http:/www.cisco.com/techsupportCopyright (c) 1986-2022 by Cisco Systems, Inc.Compiled Wed 02-Feb-22 07:28 by mcpreThis software version supports only Smart Licensing as the software licensing mechanism.PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE ORLICENSE KEY PROVIDED FOR ANY CISCO SOFTWARE PRODUCT, PRODUCT FEATURE,AND/OR SUBSEQUENTLY PROVIDED SOFTWARE FEATURES (COLLECTIVELY, THE"SOFTWARE"), AND/OR USING SUCH SOFTWARE CONSTITUTES YOUR FULLACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOUARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.Your use of the Software is subject to the Cisco End User License Agreement(EULA) and any relevant supplemental terms (SEULA) found athttp:/www.cisco.com/c/en/us/about/legal/cloud-and-software/software-terms.html.You hereby acknowledge and agree that certain Software and/or features arelicensed for a particular term, that the license to such Software and/orfeatures is valid only for the applicable term and that such Software and/orfeatures may be shut down or otherwise terminated by Cisco after expirationof the applicable license term (e.g., 90-day trial period). Cisco reservesthe right to terminate any such Software feature electronically or by anyother means available. While Cisco may provide alerts, it is your soleresponsibility to monitor your usage of any such term Software feature toensure that your systems and networks are prepared for a shutdown of theSoftware feature.% Checking backup nvram% No config present. Using default configFIPS: Flash Key Check : BeginFIPS: Flash Key Check : End, Not Found, FIPS Mode Not EnabledAll TCP AO KDF Tests Passcisco WS-C3850-48P (MIPS) processor (revision X0) with 794816K/6147K bytes of memory.Processor board ID FCW1949C1G82048K bytes of non-volatile configuration memory.4194304K bytes of physical memory.252000K bytes of Crash Files at crashinfo:.1611414K bytes of Flash at flash:.0K bytes of WebUI ODM Files at webui:.Base Ethernet MAC Address : 00:da:55:70:af:00Motherboard Assembly Number : 73-15800-07Motherboard Serial Number : FOC194935V6Model Revision Number : X0Motherboard Revision Number : B0Model Number : WS-C3850-48PSystem Serial Number : FCW1949C1G8Press RETURN to get started!*Aug 26 19:01:59.201: Rommon debug: debugFlagsStr[1], flags[0x1]*Aug 26 19:02:01.868: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed*Aug 26 19:02:01.870: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled*Aug 26 19:02:01.871: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed*Aug 26 19:02:01.880: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled*Aug 26 19:02:01.881: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed*Aug 26 19:02:02.606: %IOSXE_RP_NV-3-NV_ACCESS_FAIL: Initial read of NVRAM contents failed*Aug 26 19:02:02.716: %IOSXE_RP_NV-3-BACKUP_NV_ACCESS_FAIL: Initial read of backup NVRAM contents failed*Aug 26 19:02:05.413: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized*Aug 26 19:02:05.415: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled*Aug 26 19:02:05.418: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowedRA Tracing tool registry return: 0*Aug 26 19:02:18.239: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan*Aug 26 19:02:19.919: %LINK-3-UPDOWN: Interface Lsmpi18/3, changed state to up*Aug 26 19:02:19.921: %LINK-3-UPDOWN: Interface EOBC18/1, changed state to up*Aug 26 19:02:19.923: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down*Aug 26 19:02:19.923: %LINK-3-UPDOWN: Interface LIIN18/2, changed state to up*Aug 26 19:02:20.278: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 1: EMP_RELAY: Channel UP!*Aug 26 19:02:20.285: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch withmgmt port UP*Aug 26 19:01:39.546: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 1 on Switch 1 is nocable*Aug 26 19:01:39.547: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is down*Aug 26 19:01:39.547: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is nocable*Aug 26 19:01:39.547: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.*Aug 26 19:01:44.183: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.*Aug 26 19:01:46.186: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.*Aug 26 19:01:46.187: %STACKMGR-6-ACTIVE_ELECTED: Switch 1 R0/0: stack_mgr: Switch 1 has been elected ACTIVE.*Aug 26 19:02:20.300: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch withmgmt port UP*Aug 26 19:02:20.309: %SMART_LIC-6-HA_ROLE_CHANGED: Smart Agent HA role changedto Active.*Aug 26 19:02:20.937: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi18/3, changed state to up*Aug 26 19:02:20.950: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC18/1,changed state to up*Aug 26 19:02:20.950: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up*Aug 26 19:02:20.951: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN18/2,changed state to up*Aug 26 19:02:23.191: %SYS-5-CONFIG_P: Configured programmatically by process MGMT VRF Process from console as vty0*Aug 26 19:02:23.205: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-vrf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001*Aug 26 19:02:23.274: %SYS-5-CONFIG_P: Configured programmatically by process MGMT VRF Process from console as vty0*Aug 26 19:02:23.512: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down*Aug 26 19:02:25.715: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored based on the configuration register setting.*Aug 26 19:02:26.261: %SYS-5-CONFIG_P: Configured programmatically by process CPP MQC QoS Policy manager from console as vty2*Aug 26 19:02:26.382: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up*Aug 26 19:02:26.924: %SYS-5-CONFIG_P: Configured programmatically by process PnP Agent Discovery from console as vty0*Aug 26 19:02:28.671: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Aug 26 19:02:28.671: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Aug 26 19:02:28.671: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Aug 26 19:02:28.672: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Aug 26 19:02:28.678: %SYS-5-RESTART: System restarted --Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.12.7, RELEASE SOFTWARE (fc2)Technical Support: http:/www.cisco.com/techsupportCopyright (c) 1986-2022 by Cisco Systems, Inc.Compiled Wed 02-Feb-22 07:28 by mcpre*Aug 26 19:02:29.627: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/1, changed state to down*Aug 26 19:02:29.630: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/2, changed state to down*Aug 26 19:02:29.635: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/3, changed state to down*Aug 26 19:02:29.636: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/4, changed state to down*Aug 26 19:02:29.636: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/1, changed state to down*Aug 26 19:02:29.639: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/2, changed state to down*Aug 26 19:02:29.644: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/3, changed state to down*Aug 26 19:02:29.645: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/4, changed state to down*Aug 26 19:02:30.319: %LINK-3-UPDOWN: Interface Vlan1, changed state to up*Aug 26 19:02:30.629: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/1, changed state to down*Aug 26 19:02:30.630: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/2, changed state to down*Aug 26 19:02:30.636: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/3, changed state to down*Aug 26 19:02:30.637: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/4, changed state to down*Aug 26 19:02:30.637: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/1, changed state to down*Aug 26 19:02:30.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/2, changed state to down*Aug 26 19:02:30.644: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/3, changed state to down*Aug 26 19:02:30.645: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/4, changed state to down*Aug 26 19:02:31.607: %SYS-6-BOOTTIME: Time taken to reboot after reload = 262seconds*Aug 26 19:02:31.957: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down*Aug 26 19:02:32.957: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down*Aug 26 19:02:33.509: %ONEP_BASE-6-SS_ENABLED: ONEP: Service set Base was enabled by Default*Aug 26 19:02:36.359: %SYS-5-CONFIG_P: Configured programmatically by process EPM CREATE DEFAULT CWA URL ACL from console as console*Aug 26 19:02:38.465: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative time source, like NTP, can be obtained.*Aug 26 19:02:39.941: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI_LEGACY created succesfully*Aug 26 19:02:39.985: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI_LEGACY has been generated or imported by pki-sudi*Aug 26 19:02:40.082: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI_LEGACY0 created succesfully*Aug 26 19:02:40.095: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI created succesfully*Aug 26 19:02:40.131: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI has been generated or imported by pki-sudi*Aug 26 19:02:40.339: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI0 created succesfully*Aug 26 19:03:23.489: %WSMAN-3-INVALID_TRUSTPOINT: Trustpoint associated with HTTP is either invalid or does not exist*Aug 26 19:06:53.465: %PLATFORM_FEP-1-FRU_PS_ACCESS: Switch 1: power supply B is not respondingSwitch> Please Click Here to Visit Our Store at "> at " src="https://www.ocdepot.com/template/Rounded_Middle_Right.gif" /> at " src="https://www.ocdepot.com/template/Rounded_Left_Bottom.gif" /> at "> at " src="https://www.ocdepot.com/template/Rounded_Middle_Bottom.gif" /> at " src="https://www.ocdepot.com/template/Rounded_Right_Bottom.gif" /> SearchBy37 - 263190 | Loc: Z207 | L: Mitchell | T: | PM: Nick | QTY: 0 | Plan: L FREESHIP - 20LBS | 22.00"x22.00"x5.00" 27.00lbs | Start: $0.00 | BIN: $109.99 | | 2024-08-27 | | 175699

Price: 109.99 USD

Location: Garden Grove, California

End Time: 2024-09-27T21:29:56.000Z

Shipping Cost: 0 USD