CATZ FET XLD Driving HYPER WHITE BULB fits Wake Board Tower Bar C-West

Description: CATZ XLD 12V 70W DRIVING REPLACEMENT BULB IN HYPER WHITE COLORBRAND NEW!!! MADE IN JAPAN!!!1 BULB Please adjust the quantity if you need more than 1. 1 BULB Please adjust the quantity if you need more than 1 Bulb.These bulbs are the exclusively made bulbs for the CATZ FET XLD Driving bulb and fitment is guaranteed. Some people have found other ways to use them so.....Approximate measurements are: 2" wide x 2" Tall ROUND shapeThe depth from the face of the bulb to the tip of the terminals is 2 9/16" STREET CARS!!! MOTOR CYCLES!!! MAZDA RX-7 C-WEST KITS!!! WAKE BOARD TOWER BARS!!! More about these CATZ FET Replacement bulbs: HYPERBULB The improved efficiency and intensity has been achieved by increasing the halogen gas pressure and the proportion of the thermally more efficient "Xenon" has in a halogen bulb. This increases the luminous flux by more than 20%, improving the color and brightness. Since the heat and the wattage do not increase, the HYPERBULB will last 30% longer than any other conventional halogen bulb with equal brightness. New lens which transforn light into an intense white-blue beam, similar in appearance to the High Intensity Discharge (HID) lighting seen on new Porsche, BMW, Lincoln, etc. but at a fraction of the cost. Available on MSX, MSP, XLD, and XLO. BOROSILICATE GLASS--- Glass utilized in all CATZ lenses. Boron and Silicon are mixed with clear glass to form a lens which is hard and therefore more resistant to cracks, chips, and scratches. Since borosilicate glass has no tempered coating, it dissipates heat more efficiently giving you a longer lasting bulb. COOLING FINS---Cooling fins are a built in part of the design of most all CATZ lights as one of the many ways to dissipate heat. Keeping the bulb cool is the key to the longest bulb life possible. DRIVING LIGHT BEAM--- Light beam which is long and narrow so as to light the road a far distance off. Best suited for driving in clear weather. Provides a beam which is wider but not quite as far reaching as our "Spot Beam". Driving beams enhance your regular headlights. (See also: Driving Light Beam, Fog Light Beam, and Spotlight Beam.) MULTI-SURFACE REFLECTOR--- Computer designed reflector which focuses over 1700 points of light reflection per square inch into the area where it is needed. This technology eliminates the need for a fluted lens, as the light is aimed by the reflector, rather than the lens. Elimination of a fluted lens helps to prevent light from being lost as stray light or "scatter". The result is 70% more luminous efficiency than a conventional parabolic reflector lamp with a fluted lens. Multi-Surface Reflector technology is used by the XSL, XLO, MSR, MSP, MSX and MSC lamps. SEALED DICHROIC BULBS--- Halogen bulb, Borosilicate lens and Multi-Surface reflector are bonded together as an air-tight sealed unit. Doesn't allow moisture or condensation to build up inside the lens/reflector which helps to prevent bulb blow out. Sealed Dichroic bulb units feature Multi-Surface Reflector technology (see "Multi-Surface Reflector"). Sealed Dichroic Bulb design also lends a "modular" quality as Gold Iridium coated bulb units can easily be exchanged for clear units and vice-versa. This gives the customer the option of changing the look and performance characteristics of his CATZ lamp set up without having to buy complete new lamps. Sealed Dichroic bulbs are utilized in the XSL, XLD and XLO lamps. VACUUM VAPORIZED CHROME REFLECTORS---The Chrome is super clear and also includes a electro statically applied heat resistant silicone coating to reduce moisture build up, rust, moisture build up and browning. The main benefit is the clarity of the chrome giving you the most light output possible.

Price: 42.99 USD

Location: Mundelein, Illinois

End Time: 2024-08-03T15:35:54.000Z

Shipping Cost: 0 USD