Broadcast Tools SS8.2 Automation Stereo Audio Switcher w/Silence Sensor SS 8.2

Description: New Old Stock, In Factory Carton • Tested/Guaranteed • Mint Condition • Fully Working • All Connector Blocks Included • 115V Power Supply Included • Serial Cable Included Unit is unused, still in the factory carton which has some wear, tape, labels etc on the outsie. It's in mint cosmetic condition and has been tested to confirm that it works as it should. The 115V AC power supply is included as are a full set of connector blocks, and a RS-232 serial interface cable. No printed manual is included but a copy may be downloaded from https://www.prostudioconnection.net/0513/Broadcast_Tools_SS8.2_Manual.PDF. Ships set to RS-232 @ 9600 8-N-1, a console input of [Space] [Zero] brings up the main menu. Description The SS8.2 is designed to accommodate 8 stereo inputs, 2 stereo outputs and 2 monaural outputs. Output selectable silence sense monitoring is also provided. The SS8.2 may be controlled via front panel switches with indicators and/or externally. This may be any momentary contact closure or TTL/CMOS logic. Open collectors are provided for status. The SS8.2 also has the ability to be controlled by a computer. Full details may be obtained from the User Manualhttps://www.prostudioconnection.net/0513/Broadcast_Tools_SS8.2_Manual.PDF Additional features include stereo silence sensor with SPDT relay, front panel stereo LED VU meters, stereo headphone jack with level control, powered monitor level control all with output selection switching, 16 Trigger(PIP) inputs, four GPO open collectors and four SPDT relays. Installation is simplified with pluggable euroblock screw terminals. The SS 8.2 is supplied in a 1-RU chassis. Input Levels -15 to + 18dBu, balanced, bridging. > 12k ohms Output Levels Stereo balanced outputs 1 & 2, +24 dBm. at 47 ohms. Monaural balanced outputs 1 & 2, +24 dBm. at 47 ohms. Powered speaker output, +8 dBm at 47 ohms. Headphone output, +4 dBm at 47 ohms. Gain 12dB Frequency Response 22 to 22 kHz; +/- .025dB Signal Noise 95 dB nominal, weighted 20 to 22Khz, at +4dBu. Distortion Less than 0.003%25 THD at +18dBm.IMD (250/7kHz): Less than 0.002%25 IMD at +18 dBm. Crosstalk -85 dB at 1kHz / -55 dB at 10 kHz from adjacent off channel. Inputs Unbalanced summing inputs at 10k ohms, 0 dBu Switching Method Digitally controlled professional level "clickless" analog switch arrays. Logic Microprocessor / Non-volatile memory. Operation Control Front Panel - Momentary switches. Remote Momentary closure to ground. > 100ms. RS-232/RS-485 - Multi-drop Serial 2400 to 38.4 K baud, 8N1. Status Front Panel - LED indicators in switch. Control 8 - SPST Relays Remote 8 - Open collector outputs. RS-232/RS-485 - Multi-drop Serial 2400 to 38.4 K baud, 8N1. Interfacing Audio - Rear panel depluggable screw terminals. Accommodates 16 28 AWG wire. Mating connectors supplied. Remote Control 2 - Male 25 pin "D" connector, mates supplied. RS-232 Serial - RJ-11/6P4C Modular, Adapters & cable supplied. RS-485 Serial Depluggable screw terminals. Power Requirement 34.5 Vac @ 500 ma / 10.5 Vac at 1 amp, 120 Vac 50-60 Hz "Lump in the line" power transformer. Supplied. Dimensions 19" X 1.75" X 10.0" (WHD) Weight 9.0 lb

Price: 508.5 USD

Location: Winter Garden, Florida

End Time: 2024-08-24T18:33:44.000Z

Shipping Cost: N/A USD