Boyo VTL425TJ Black Slim Backup Camera + Active Lines

Description: Product highlightscolor backup camera in a bar-type license plate mount super-slim zinc bar mounts at the top of your license plate includes 24-foot video cable active parking lines universal fit compatible with any radio with an RCA video input (most aftermarket models, only a few factory) 140-degree wide angle waterproof (IP67 rating) resolution: 960 x 480 pixels night vision rating: 0.1 Lux warranty: 1 year What's in the boxLicense plate backup camera (black) with attached 31" video cable 24' Video extension cable 14" Composite video adapter cable (attached 6" power/ground wires along with blue & white loop-wires) Two 1-1/4" Hex-head bolts 2 Lock-washers 2 Flat-washers 2 Nuts 1.5mm Allen key Instruction manual Warranty information Product registration card About this itemWritten by Crutchfield's Alexander H.Mount over your license plate This Boyo backup camera is housed in a slim-profile bar that doesn't obscure your license plate, making it a solid choice in all fifty states. Boyo uses a sturdy zinc metal frame for a long life and mounts the waterproof rear-view camera on an up/down swivel, so you can get exactly the picture you want. Active parking lines Be more precise when you back up with active parking lines that curve as you turn. This cam predicts your trajectory and shows you where you're headed in reverse so no spot is too tight. A great picture Boyo uses a CMOS image sensor that gives you the best picture possible, and they include a composite video cable that runs from the camera to the video screen up front. Installing this camera yourself? Here's what you should know. What does it do? Unless otherwise noted, a backup camera is only intended for use backing up your vehicle. (If you require a front-view or constant rear-view camera, check for that capability.) What tools and supplies will I need? A panel tool, a wire cutter/stripper, a soldering iron, and a rosin-core solder with heat shrink tubing are recommended, along with whatever tools are needed to remove the radio from the dash. How much wiring is required? Wiring instructions vary from camera to camera. Some cameras have power wiring that can only be connected near the radio. Others let you power the camera at compatible reverse lights. In all cases, the camera must be wired for power and ground, the camera's video output must be connected to the radio/monitor, and the radio/monitor must be connected to a reverse trigger in your vehicle. Some radio replacement interfaces supply a reverse trigger wire for the radio -- using that wire to power your camera will damage the interface. Will the included video cable be long enough? You'll need to route the camera's video cable from its mounting location outside your vehicle into your vehicle's cabin and all the way to the screen in the dash. This often requires drilling a small hole in your vehicle or filing some metal and or plastic. You'll also need to estimate the length of cable needed to run from the camera to the dash, which will not be a straight shot. Each camera's cable length is listed.

Price: 99.99 USD

Location: Charlottesville, Virginia

End Time: 2024-09-02T20:10:38.000Z

Shipping Cost: 0 USD