BMW DME CLONING SERVICE N52 N55 N57 S55 S65 N20 N62 N63 S63 N73 N74 B38 B48 B58

Description: BMW DME CLONING SERVICE N52 N55 N57 S55 S65 N20 N62 N63 S63 N73 N74 B38 B48 B58 This is a mail in DME cloning service covering BMW & MINI vehicles. Some examples of common DME's covered: MS41 MS42 MS43 MS45 MS45.0 MS45.1 MSS52 MSS54 ME7.2 ME9 ME9.2 ME9.2.2 MSD80 MSD81 MSD81.2 MSD85 MSD87 MSS60L MSS60R MSS70 MSV70 MSV80 MSV90 MEVMEV17.2.2MEV17.4.6MEV9.2 MEVD MEVD17.2MEVD17.2.2MEVD17.2.3MEVD17.2.4MEVD17.2.5MEVD17.2.6MEVD17.2.7MEVD17.2.8 MSMEVD17.2.9MEVD17.2.GMEVD17.2.H MSMEVD17.2.PMEVD17.8.4 EDC16EDC16C1EDC16C31EDC16C35EDC16C35EDC16CP35EDC16CP35 MS EDC17EDC17C06EDC17C41EDC17C50EDC17C56EDC17C76EDC17CP02EDC17CP02EDC17CP09EDC17CP45EDC17CP49 MD1CP002DDE832C MD1CP032DME_DDE8530 MD1CS001DDE802LDDE803PDDE803S MG1CS003DME_840DME_840H DME_841DME_841HDME_860DME_861DME_86T0DME_880DME_8C0 MG1CS024DME_86T0 MG1CS201DME_83T1DME_84T0DME_84T1DME_88T0DME_88T0 Verify your module part # with us first before ordering to confirm your module is eligible for this service *IF MODULES ARE DELIVERED TO ECU SAVER BEFORE NOON MONDAY-FRIDAY, THEY WILL BE CLONED AND SHIPPED OUT SAME DAY* ECU Saver cloning process involves first backing up all original data from your faulty DME as well as the donor module. We will then transfer your original VIN #, immobilizer ISN, software and coding (including injector coding if applicable) to the replacement customer supplied donor DME. The replacement DME will be identical to original after cloning. We do not use soldering or removal of EEPROM chips off the board during cloning procedure so you can be assured that the replacement DME will not be damaged physically during cloning process. After receiving the DME back, it will plug into the car and start right up as if it were original with original keys. FREE USPS PRIORITY MAIL return shipping (1-4 days)! If you require faster shipping, ECU Saver will gladly expedite shipping at additional cost. A separate invoice will be sent to you and payment must be received before the modules are returned. You are responsible for sourcing a matching donor DME to have your original faulty module cloned to. Replacement DME can be sourced for fairly cheap usually on eBay or car-part.com. If you do not see your module noted in this listing and own a BMW, Mercedes, Mini, or Land rover, send a photo of your module and we can direct you to the proper listing to purchase cloning service for your ECU. In the event that the DME cannot be cloned you will need to have a matching donor DME programmed to the vehicle by injecting the donor DME ISN into your CAS module. The donor DME will work in your vehicle as long as the part #'s for both modules are the same and the donor module is coming from a vehicle with the same type of transmission as your vehicle. For example, If your donor module has come from a vehicle with an automatic transmission and you have a manual transmission you will likely get EGS faults (no communication to transmission control module) which could turn the check engine light on. There is additional programming and variant changing that must be done within the donor module to tell it that the vehicle does not have an EGS (automatic transmission control module). This can be done with INPA or other BMW Engineering tools. If your DME cannot be cloned and you are unable to send the CAS, you will be refunded and your modules will be shipped back to you at your expense. Verify your original and donor modules are the same part number MSD80->MSD80, MSD81->MSD81, Etc. before sending them in for cloning. ORDER FORM LINK: https://www.ecusaver.com/uploads/b/990f3fa0-c605-11ed-aa6e-15c4d53fe642/ECU%20SAVER%20ORDER%20FORM%20(Fillable).pdf What to do after purchasing this service: Step 1 - Fill out the order form completelyCopy and paste the "Order Form" link above into your browser, it will take you to our order form in PDF formatOur shipping information is located at the bottom of the form, ship your modules here when readyFill out the repair form including your VIN #, first and last name, preferred contact phone #, email address, symptoms and fault codes found during diagnosis, and any other pertinent information you wish to add Step 2 - Remove your DME module from the vehicleYou are required to remove your DME control module from your vehicle. If you need guidance send us your VIN and we will send you an instructional on how to remove it from your vehicle. We have factory repair instructions as well as YouTube videos availablePlan ahead and park the vehicle in a spot where it can sit until you receive your module back Step 3 - Ship your DME and donor DME module, along with CAS module (CAS not needed for cloning but recommended in case cloning cannot be performed successfully)You are responsible for shipping your parts to ECU-Saver! Return USPS PRIORITY MAIL shipping (1-4 days) is included in purchase priceIf you require faster shipping we are more than happy to accommodate and we can determine costs and send additional invoice for faster shippingPut the form in the box for shipping along with your partsOnce shipped, provide tracking # to ECU Saver immediately to ensure we can keep tabs on your shipment and complete your order as fast as possible. Step 4 - Receive your DME's (and CAS if sent) and install into the vehicle. That's it! (Unless instructed otherwise) WARRANTY All modules cloned by ECU Saver have a limited lifetime warranty. If a module that was cloned by ECU Saver fails and requires re-cloning, send the faulty DME with another donor DME and ECU Saver will clone it for you for fee of $50. Customer is responsible for shipment both ways. Warranty is non-transferrable to future owners.

Price: 180 USD

Location: Kirkland, Washington

End Time: 2024-12-07T07:18:36.000Z

Shipping Cost: 0 USD