BMS 4S-8S 200A Smart BMS 2A Active Balance Energy Transfer Built-in Bluetooth

Description: Note: Due to this BMS is not properly compatible with Relay and Inverter, occasionally it warns "Current sensor abnormal" or the current is not accurate when the BMS connected to Relay or Inverter, please ignore it if you really care about it, please do not purchase, otherwise we will not accept any refund, Thanks! Description This is an Active BMS, it supports 3S-8S of Li ion and 4S-8S of LiFePo4 200A continuous current, It also has 2A active equalization current It can set up the equalization voltage and the charge & discharge protection parameter through APP, It can display the single series of battery voltage After connected the BMS, please use the power supply which is 5v greater than battery voltage to activate it Product character 1.Active balance functionality, no need to lose the battery capacity to balance the voltage difference of sells, raise the battery usage efficiency for 95% 2.It can be used on 4-8s li-ion/Cobalt acid lithium/Manganese acid lithium/Lithium iron battery packs 3.Constant working current is 200A 4.It has the protections of Over-charge/Over-discharge/Over-current and Short circuit etc. Working condition Workable temperature: -20~70℃ Power requirement: 24V~100V, it could be worked by battery power or external Power supply Power dissipation: In balance: 10mA & 100V, No balance: 6mA & 100V Notice: The 485 converter just for transfering the communication to be RS485, it can not be connected to PC directly, it needs to connect to another 485 module to connect to PC, The yellow wire is for 485A , the white wire is for 485B, the black wire is for GND and you don't have to connect the black wire, We will provide you the 485 protocol after bought the 485 converter, and we don't provide the software, if you are not the familiar with Serial Port Debugging Tool, please be careful when you want you purchase this product Balanced way: Active equalization Active equalization current:2A internal resistance：1.3mΩ Rated discharge current：200A Maximum discharge current：250A Overcurrent protection（Adjustable）:10-200A Wiring method:common port Monomer voltage range: 1V-5V Voltage acquisition accuracy: ±5mV Battery cell Over-charge protection voltage :1.2V-4.35V（Adjustable） Battery cell Over-charge protection recovery voltage: 1.2V-4.35V（Adjustable） :2-120S （Adjustable） Battery cell Over-discharge protection voltage: 1.2V-4.35V（Adjustable） Battery cell Over-discharge protection recovery voltage : 1.2V-4.35V（Adjustable） Connection:

Price: 121.8 USD

Location: shenzhen

End Time: 2024-12-31T04:45:12.000Z

Shipping Cost: 15 USD