Description: Bitmain APW3++ 1600W Power Supply 110/220 APW3 PSU Antminer S9 L3+ D3 A3 S7 Z9. New! 1. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.2. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner. Specifications:Output1.DC Voltage:12.15V2.Rated Current(220V input):133A3.Rated Current(110V input):100A4.Rated Power(220V input):1600W5.Rated Power(110V input):1200W4.Ripple & Noise:<1%5.Voltage Regulation:<2%6.Source Regulation:<1%7.Load Regulation:<1%8.Setup, Rise Time:<2s9.Power off Protection Trip Time:>9mS10.Interface Type:5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)11.Noise Level:<43db Input:1.Voltage Range:100-240V AC2.Starting Voltage:95-105V AC3.Frequency Range:47-63Hz4.Power Factor:>0.95 (full load)5.Leakage Current:<1.5mA (220V 50Hz) Protection1.Low-voltage Input:80-89V AC2.Output Short Circuit:Yes3.Output Overcurrent:134-185A max.4.Overheat Protection:Yes Environment Conditions1.Operating Temperature:-20°C - 50°C2.Operating Humidity:20% - 90% relative humidity (non-condensing) Fan:Forced-air cooling Size:220mm*108mm*62mm Package Included:1 x power supply for Antminer S9 for L3 Note: The power cord is not included, please find one with at least 10A from your local market.
Price: 125.99 USD
Location: Carson, California
End Time: 2024-03-17T01:26:03.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Bitmain
Model: Power Supply
