Benewake TF-Luna LiDAR Range Finder Sensor Micro Ranging Module 5V UART IIC

Description: Benewake TF-Luna LiDAR Range Finder Sensor Single-Point Micro Ranging Module 5V UART IIC Interface With Male Cable+Famale Cable Description: Operating range: 0.2m~8m1 Accuracy: ±6cm@(0.2-3m), ±2%@(3m-8m) Measurement unit:cm Range resolution: 1cm FOV: 2°3 Frame rate: 1~250Hz( adjustable )4 Supply voltage: 5V±0.1V Average current: ≤70mA Peak current: 150mA Average power: 350mW Communication level: LVTTL(3.3V) Communication interface: UART/IIC Default baud rate: 115200 Data bit: 8 Stop bit: 1 Parity check: None Light source:VCSEL Wavelength:850nm Operating temperature : -20°C~75°C Certification:CE,FCC,ROHS Major Applications: Traffic Monitoring Obstacle detection Level measurement Smart device Security and obstacle avoidance Drone altitude holding and terrain following Machine control and safety sensors Distance measuring instrument Package Includes: 1 X TF-Luna LiDAR Module 1 X Male Cable + Famale Cable FAQ Q1: Is TF-Luna available with 3.3V or other power supply voltage? A1: Sorry, it is not available for the time being. The Standard power supply of TF-Luna is 5V±0.1V. If you have any further requirement, please contact our sales person to consult a customization design matter. Q2: TF-Luna will heat up after operating for a while. Is it broken? A2: This is the normal operating condition of the product. The temperature of the chip and circuit board will slightly up after a continuous operation, which is a normal case. Q3: Can TF-Luna be connected with Arduino or Raspberry Pi for use? A3: Yes, it can. TF-Luna adopts serial communication protocol so that it can connect to any control board supporting serial port communication.

Price: 24.99 USD

Location: Shenzhen

End Time: 2024-12-28T11:13:09.000Z

Shipping Cost: 0 USD