Bench Grinding Wheel 6 inch, Green Silicon Carbide Abrasive. for Sharpening C...

Description: Product name: Green Silicon Carbide Grinding wheel (GC) Product Quantity: 1piece Product weight: 1.38 LBS Safety several work description: 1. Select the grinding wheel with the spindle revolution of the grinder. Please check the grinding wheel before installation. Do not use it if any cracks or damages are found 2.The gap between inner hole of grinding wheel and spindle should not be too tight. After the shaft is bent, it should be stopped immediately and can continue to use after of new parts 3,The shield used by the grinder should cover at least half of the diameter of the grinding wheel 4. After the grinder is started, it must be idled for at least 2 minutes. During idling, the operator should stand in a safe position, and it is strictly forbidden to stand in front of the grinding wheel or in the tangent direction 5. The rotation direction of the grinder should be correct, so that the grinding debris can only fly downward from the grinding wheel. Grinding is carried out after the grinder rotates smoothly. If the grinder runout is obvious, it should be stopped in time for dressing 6, The initial grinding can not be too hard, in order to avoid uneven grinding wheel force and accidents. people are not allowed to sharpen a knife on the same grinding wheel at the same time7. It is strictly prohibited to use side grinding to avoid grinding wheel crushing. Do not grind copper, lead, wood and other things to prevent the grinding wheel from impingement. 8, The sharpening time is long tool, should be timely cooling, to prevent hot hand9. Regularly trim the surface balance of the grinding wheel. Keep it properly after use, do not knock against it, keep grinding wheel dry 10, always wear personal protective equipment, , eye , work cap, etc11. the instructions Application: Green silicon carbide grinding wheel is suitable for grinding non-ferrous metals such as carbide tools and workpieces. It can also grind non-metals such as optical glass, ceramics, and stone. The tool head and workpiece will not be burned during grinding. The grinding wheel has been tested for dynamic balance and runs stably without shaking. Quality: The grinding wheel is made of first-sand, silicon carbide and adhesive sintered at high temperature, also known as a ceramic grinding wheel. Features: wear-resistant, durable, strong toughness. High hardness, high brittleness, sharp abrasive grains, good thermal conductivity. Disadvantages: Not suitable for processing workpieces with high toughness Size: Diameter: 6 inches, Arbor: 1/2 inch, Thickness: 3/4 inches. Standard size grinding wheels are installed on grinding machines with a 1/2 inch spindle. Please choose the grinding wheel that suits your machine model Safety and precautions: The base of the grinding machine must be fixed. A machine without a fixed base is easy to move, causing vibration and damage to the grinding wheel during grinding. Before installing the grinding wheel, please check and operate according to the instructions provided. Before operating the grinding wheel, please take personal protection After-sales: Each of our products is inspected and packaged, but accidents cannot be ruled out. If you receive an unsatisfactory product, please feel free to . We will do our best to solve the problem until you are satisfied.

Price: 35.42 USD

Location: Raleigh, North Carolina

End Time: 2024-12-01T01:42:34.000Z

Shipping Cost: 0 USD