Axon Instruments/Molecular Dynamics Digidata 1322A 16bit Data Acquisition System

Description: Axon Instruments/Molecular Dynamics Digidata 1322A 16-bit Data Acquisition System/Digitizer Comes with what you see in the pictures. If you don't see it, you probably won't get it. Specifications are from Axon Instruments and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This unit powers up and the ready light turns on. We don't have the expertise to test it after that. This unit does not come with a SCSI adapter card but it does have a SCSI cable. The Unit's Serial Number Tag Reads: Model Number: Digidata 1322A Serial Number: 91282 Power Requirements: 100-240 VAC~, 50-60 Hz, 85 W CE Marked: Yes The Cable's Information Tag Reads: Part Number: 2100-408 Revision: H Description: The Digidata 1322A is a high-resolution, low-noise digitizer intended for precision scientific applications. The Digidata 1322A digitizes at an aggregate speed of 500 kHz. It provides sixteen multiplexed, 16-bit analog inputs and two non-multiplexed, 16-bit analog outputs. There are sixteen digital input lines and sixteen digital output lines, as well as Tag and Start digital inputs. The Digidata 1322A communicates with the host computer through the SCSI bus. To minimized the likelhiood of installation or performance problems, every Digidata 1322A is supplied (this unit does not come with the SCSI card) with a SCSI adapter card that should be installed into the computer, although you may choose to use an existing SCSI port. The Digidata 1322A is compatible with both the Windows and Macintosh operating systems. It is a plug-and-play device; it is automatically recognized by Windows 95, 98, and 2000. The Digidata 1322A is supported by Clampex 8, AxoScope 8, and AxoGraph 4.2 (and higher versions) - software not included. AxoScope is an easy-to-use, full-featured data acquisition program for Windows. The Digidata 1322A has higher speed, lower noise and better resolution (greater dynamic range) than the previous Digidata 1200 models. New features also include better instrument telegrpah support and line-frequency triggering. Specifications: Analog Input: Number of Input Channels: 16 single-ended Resolution: 16-bit, 1 in 65536 Acquisition Rate (aggregate): 500 kHz Input Range: -10.000 V to +10.000 V Input Resistance: 1 MΩ Gain Value: 1 Integral Linearity Error: ±2 LSB (max) No Missing Codes: 16-bit Signal-to-(Noise+distortion)(fIN=100 kHz): 84 dB (min) Analog Output: Number of Channels: 2 Resolution: 16-bit Output Voltage Ranges: -10.000 V to +10.000 V Output Impedance: < 0.1 Ω Output Short Circuit to Signal Ground: ±25 mA Integral Nonlinearity: ±0.003% FSR (±1 LSB; max) Digital Inputs: Number of bits: 16 Input Type: TTL compatible Digital Outputs: Number of bits: 16 Output Driver: HC compatible Output Current: ±4 mA Trigger In: Input Type: TTL compatible TAG: Always level sensitive START: 2 modes: edge and level For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $10.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? 10/07/24

Price: 999.99 USD

Location: Phoenix, Arizona

End Time: 2024-11-07T21:35:44.000Z

Shipping Cost: N/A USD