Animal Feed Pallet Mill Machine Forage Granulator Two Discs 4mm 10mm 220V Press

Description: Animal Feed Pellet Mill Machine 4mm 10mm DiscsFeed granulator is widely used in large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants.This machine attach with two plates 4mm & 10mm, will meet different feeding size request. We supply 2-15mm different size discs, if you need other size please contact us. 220V, 4500W, 6HP, output 440lbs/h, three head roller, two plates. with an enlarged and widened discharge port to prevent feed splashing and facilitate the collection of feed by customers.This machine is equipped with a voltage display, which can visually see whether the voltage is stable. Adjustable nut Used to adjust the distance between the pressure roller and the grinding disc. When making pellets, the nuts on the three sides must be balanced to avoid damage to the pressure roller and grinding disc. Enlarge the feed inlet, which makes it more convenient for you to feed and effectively improves work efficiency. Here is the filling port, open here to add engine oil It is recommended to add high-quality machine oil or hyperbola heavy-duty gear oil. The length of feed particle scan be adjusted here. The machine is equipped with air switch, which is safer to use. Because this machine has a big power, we suggest to connect wire to the breaker directly !After using the machine for a period of time, the customer needs to add butter to lubricate the grinding chamber here (approximately 4-6 months of use) (the butter gun and butter need to be purchased by the customer themselves, and we do not provide them). Precautions: 1.When using, it should be noted that there should be no foreign matter such as stones and iron blocks in the raw materials. After the pellet machine has been working continuously for more than ten shifts, the pressure roller oil hole, the universal joint oil hole, and the linkage shaft oil hole need to be filled with high-temperature lubricating grease to make the pressure roller Good working performance and extended bearing life. 2.During granulation, it is strictly forbidden for the pressure roller to contact with the template to run idly, and the continuous feeding can not be interrupted. At the same time, the pressure roller shaft nut is locked to avoid loosening and damaging the spindle keyway. 3.When granulating, there is no granulation, no discharge, the template should be removed, and after opening one by one, some fiber feed can be added appropriately to restart the granulation. 4.Always check the tightness of the screws in each part of the machine. If there is oil leakage in the gearbox, replace the oil seals in time, and check whether the bearings in the machine head are short of oil. 5.When the pellet machine is working, do not reach into the feeding port with your hands. If necessary, use wooden sticks to help feed the pellets. 6.Before turning on the machine, it is necessary to add less material before turning on thee machine. When shutting down, leave a small am 7.If the machine is stuck in operation, stop it immediately, press the pressure roller until the bolt is flat, and then restart the machine. 8.Each time the work is completed, the adjusting pressure roller bolts must be loosened.. 9.Iron or stones cannot be put into the griller. 10.Check the elasticity of the belt, and the bearing frequently. Add oil in time when it needs to. 　Note: 1. Before using the machine, it is necessary to adjust the screw of the pressure roller to the appropriate position. The pressure roller and the pressure plate should be closely combined, and the three adjusting screws should be on the same horizontal plane. 2. Please fill the oil tank before using the machine. Do not idle the machine for more than 2 minutes. 3.Double-check the belt and the screws before operation. 4.Clean up the rest after use to prevent damage to the machine. 5.If the pressure roller cannot rotate normally, please tighten the screws that control the pressure roller first, and then try to power it on. If it still does not work, you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again.6. Although this machine has a plug, we still suggest to remove it and connect a breaker directly. Item Number: 220V Animal Feed Pellet Mill Machine with 4mm & 10mm plates (239202+239618) On Aug 15, 2023 at 23:36:43 PDT, seller added the following information:

Price: 1221.06 USD

Location: Rancho Cucamonga, California

End Time: 2024-10-16T14:17:01.000Z

Shipping Cost: 0 USD