Alpinestars Supertech M8 Factory MIPS Helmet MOTORCYCLE Large Black/Yellow/Blue

Description: Supertech M8 Factory MIPS Helmet Product Info: Shell construction utilizes a highly advanced molding technology with a multi-composite combination: uni-directional carbon composite with aramid layer that gives significant radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and providing critical penetration protection This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the EPS liner The Supertech M8 liner construction combines with the shell to offer highly efficient impact energy management Formed with a multi-density EPS polymer, the energy absorbing layer gives an inner helmet profile which soaks up forces dissipated over the outer shell at the point of an impact and provides a shape offering a close and comfortable fit Four section liner construction allows for specific densities of polymer to be prepared for different zones around the helmet lining improving energy performance, comfort and fit A-Head fitting height and angle adjustment system Incorporates a system to allow the helmet to be tuned exactly to the rider’s preference for the height and angle at which the helmet sits on the head allowing for ultra-specific set-up that can be adapted for the type of riding and the rider’s preference Raise and lower helmet fit and tilt with micro-adjustable pad Visor release system ensuring the mounting is held securely in place for riding over extreme terrain and any track conditions Visor release system provides the right level of resistance to ensure the visor detaches from the helmet shell if it is subjected to a significant impact regardless of angle The Supertech M8 visor release mechanism is conceived to avoid the inherent weaknesses in other types of anchoring systems Maintaining shell integrity is vital for safety and with the possibility of multi-directional forces impacting on the visor, separation at the critical point of leading reduces potentially damaging leverage and rotational accelerations that refer injury to the rider’s neck and spine The base of the Supertech M8 helmet has been sculpted to give a relief section, where the bottom profile is raised to clear the collarbone (clavicle) Energy absorption pad incorporated into the area of the base pad where it sits over the rider’s collarbone Energy absorption pad consists of a more flexible compound rubber section which allows deflection when it contacts the clavicle Polypropylene chinbar allows for a degree of lateral deflection, further improving impact protection for the collarbones Multi-Directional Impact Protection System (MIPS®) incorporated to reduce rotational motion energies that impact the helmet causing damaging gyration force to be transmitted to the brain A low friction ‘slip’ layer is incorporated into the Supertech M8 helmet, between the comfort padding layer and the multi-density polymer energy absorption shell. When energy is impacted upon the helmet, causing a rotation force, the MIPS layer allows for movement of the inner absorption layer to damp and re-direct the energy before causing significant acceleration stress to the brain. This mitigates the causes of brain injuries, such as concussion Emergency Release System (ERS) While the helmet is still on the rider’s head, the side cheek padding can be extracted efficiently and safely to allow ease of removal by trackside support and medical staff The Supertech M8 is also designed to allow a helmet ‘Eject’ inflation system to be fitted into the inside crown of the shell Along with the ERS padding removal, ‘Eject’ allows for emergency removal of the helmet, without putting load on the rider’s spine Chin-strap: Wider than certification requirement: 26 mm for comfort and produced with a woven poly yarn to give a soft ‘hand’ feel that connects securely with a double D-ring The material selection, preparation and construction of the helmet has been rigorously analyzed for weight to strength and energy absorption properties and a strict analysis of all the components used in the Supertech M8 finishing Heat mapping tests have resulted in specifically designed ducting which produces a positive flow into the helmet over and around the rider’s head, improving comfort while riding and reducing the on-set of heat stress in extreme conditions Visor design profiled to direct airflow, acting as a channel to concentrate and smooth the flow into the shell Liner formed to optimize airflow channeling around the rider’s head before being extracted through rear exhaust vents to ensure positive pressure is maintained with constant airflow while riding Lining design includes canals which allow a tube to be incorporated on either side of the shell allowing for hydration system compatibility Removable liner cover is washable and features a cool-max fabric interior and anti-bacterial talent yarn for long-lasting freshness and quick-dry performance between riding sessions Features TPE coating washable surfaces to improve maintenance and increase durability Includes soft bag Handling Time: Handling time on all items is 1 business day. Business days are Monday - Friday excluding holidays. Orders are processed daily at 10am EST Monday - Friday, this means if you place your order after 10am EST your order will not be processed until the following business day. Domestic Shipping: Free shipping on most items unless otherwise stated to the lower 48 states. Additional charges for Alaska, Hawaii, Puerto Rico and Guam may apply. We reserve the right to change shipping carrier based on location or for combined orders. This is to ensure your package gets to you as quickly and as well packaged as possible. Our inventory is constantly updating and changing, we do our best to keep it as accurate as possible. However, in some instances seasonal items sell very fast and can be subject to temporary delays. In the case this happens, we place your parts on an emergency restocking order and the item will generally ship within 1 business day. In the event of a prolonged delay we will make our best effort to contact and notify you of such delays. ETA's provided by eBay are ESTIMATED TIMES, we aim to get you your order within these time frames however some unforeseen circumstances do arise. We will do our best to work with you to get you your item as fast as possible. International Shipping: We ship worldwide. Limitations due to manufacturer's restrictions on some items may apply The shipping costs do not include duty or import taxes so please check before you purchase an item All international items will ship via USPS Priority Mail International or USPS Express Mail International for addition fee Shipping times will vary depending on the country the item is being shipped to Combined Shipping: We do our best to combine shipping on orders. If you wish to ensure that multiple items you have purchased are combined please send us a message. We offer 30 day free returns! Returns must be in NEW/UNUSED condition in ORIGINAL PACKAGING If the part is used there is a possibility that you will not receive a full refund, as we do have to resell the item Electrical parts are NOT returnable All Returns must be authorized by us and you will get a RMA number to put on the outside of the box If an exchange needs to be made we will gladly work with you, however you must pay for shipping to return item AND shipping to get the new item to you In the event that we make a mistake, they do happen occasionally (we are sorry), we will cover shipping costs to get you the correct item

Price: 529.95 USD

Location: Bayville, New Jersey

End Time: 2024-12-11T23:36:32.000Z

Shipping Cost: 0 USD