Albatross D.Va 1064 mm / 41.9 inch inch 3D Printed RC Plane 3dLabPrint Kit.

Description: Albatross D.Va 1064 mm / 41.9 inch. Condition is New. Shipped with FedEx. My sons and I have been into RC for years, and we got tired of not being able to find replacement parts for our balsa, and foam planes so we bought a few printers and started printing our own. Once we took a few to the field others from our local clubs started asking about them, and eventually buying them from us. We figured that in the months between flying seasons why not print a few more planes and make them available to a larger group of RC enthusiasts. This is 3dLabPrint's Albatross D.VA printed on the highest quality Prusai3 MK3S printers in the best PLA filament available. This is a large scale(1064 mm wingspan), highly detailed model. It’s very easy to assemble and can be finished in a couple of afternoons. The folks at 3DLabprints have done an amazing job in designing many planes, all of which we can print and deliver to you. They also provide very detailed assembly instructions,and video tutorials on YouTube that makes building even easier. If you do have a mishap, I can provide spare parts to you for as long as you own the plane, so you never have to worry about a manufacturer dropping a model from their catalog and making parts impossible to find. All questions are welcome.Wingspan:1064 mm / 41.9 inch Length: 883 mm / 34.8 inch Height: 322 mm / 12.7 inch Wing area: 33 dm2 / 3.55 square foot Wing loading: 27,5 g/dm2 / 9.0 oz/square foot Center of gravity: 45 mm from leading edge of upper wing Airfoil: special LHK mod. by 3DLabPrint Print weight (LW PLA): 578 g / 20 oz Empty weight (w/o battery): 780 g / 27 oz Takeoff weight (3s 1300 lipo): 910 g / 32 oz Max takeoff weight: 990 g / 35 oz Never exceed speed, VNE: 80 km/h / 49 mph Design maneuvering speed, VA: 50 km/h / 31 mph Stall speed, VS: 15 km/h / 9.4 mphRequired Tools:ScrewdriverSoldering Iron (or something hot to cut the plastic with)Snap KnifePliersRuler Includes:All printed parts for model only. Electronics and radio gear is not included. More details for the model can be found at 3d Lab Print's website: https://3dlabprint.com/wp-content/uploads/2020/10/Albatros-DVa-user-guide.pdf All about3dlabprint:In 20153dLabPrint released plans for a power glider called the EasyMaxx. The design was constructed of3d printed parts, a carbon fiber tube, and typical electric RC components. Since then the company has been selling plans for models ranging from the39" Spitfire to the massive75" Corsair. All of the designs feature optimized airfoil and built-in structural support to form a rigid, strong-performing design that is a joy to fly. In addition to flying well the kits assemble like a complicated ARF. No measuring is required, just a little trimming, sanding, and CA and your kit becomes a model. Smaller models can be put together in an hour or two, while the larger models will take a few evenings to put together.

Price: 155 USD

Location: Bloomington, Illinois

End Time: 2024-10-30T02:31:15.000Z

Shipping Cost: 20 USD