ADE SPIKE ---GREEN-- Dot For Springfield Hellcat,Sig Sauer P365XL/X,Canik TP9 SC

Description: Item Description ADE Just Released The New 4MOA GREEN Dot version of the RD3-018 SPIKE! This is the GREEN DOT that customer have been waiting! The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dot(this one) and FDE/TAN body 4MOA Red dot.Designed to fit Canik Elite TP9 SC, Canik Mete SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide made for Shield RMSC/RMS, Sig Romeo 0, JPOINT4, Swampfox Sentinel Micro, Holosun HS407K & HS507K, Riton X3 Tactix MPRD and other same footprint sights. Ade SPIKE created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the green dot to become a back up iron sight. With the ultra short design, the green dot provides a distance/gap on some of full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Spike's rear white dot will acts as a pistol factory original rear sight for Co-Witness. Designed to fitCanik Elite TP9 SCCanik METE SFXCanik METE SFTSig P365X/P365XL/P365XL SPECTRE COMPRuger Max-9Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS)Springfield Hellcat OSPSpringfield XDS MOD 2 OSPSpringfield Elite 3.8” Compact OSP 9mm S&W Shield 2.0 Optics ReadyS&W M&P9 shield plus Optics ReadyS&W MP9 EZ S&W M&P shield plus performance centerWalther PPS M2 Optics ReadyKimber Mako7Girsan MC1911SC UltimateMossberg MC2SCMasada SlimTaurus GX4 ToroPlus any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. ADE SPIKE green dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness. 4MOA Weight approximately .66oz/17.5grams(Length)1.6" x (Width).92" x (Height).93"Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.Just like some $400 competitors, It does not has a on/off power button. The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be "sleeping" in a very very low power mode. Ade Advanced Optics first made its appearance in the firearms accessory industry by doing private label production for several Major manufacturers and retailers. During this period, Ade Advanced Optics began receiving requests from numerous customers for access to the affordable, high quality products that Ade Advanced Optics was capable of producing. By soliciting feedback from both clients and end users in 2010, Ade Advanced Optics was able to overcome the challenges a new company often faces when entering a global market and industry, especially one as competitive as the shooting, hunting, and outdoors industry. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun. Below are the footprint information about ADE red dots. ADE RD3-006B, RD3-009, RD3-012, and RD3-013 fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint ADE RD3-018 Spike, RD3-021 Nuwa fit optic cut/plate that is compatible with Shield RMS/RMSC/Leopold Deltapoint Pro/Sig Romeo Zero footprint ADE RD3-019 Stingray, RD3-020 Raptor, RD3-023 Valkyrie Gen2 fit optic cut/optic plate that is compatible with Trijicon RMR/ HS407C/HS507C/HS508T footprint Payment We accept any payment method ebay allows such as paypal at the checkout. Shipping We ship all items within one business day of receiving cleared payments. For payments received by 2pm PsT(Pacific Daylight Time), the package usually ships in the same day. Free shipping within 1 business day with tracking number. No international shipping!Other You can return any purchase that is Undamaged in like new condition within 30 days for full money back or exchange. If you have any question, please click contact seller. We always reply emails within 8 hours.Purchase Eligibility We have to accept the fact that things are different than when we were younger, so please make sure you can legally order and possess this item BEFORE you submit your bid. All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item. Track Page Views With Auctiva's FREE Counter

Price: 115.99 USD

Location: Oregon City, Oregon

End Time: 2024-11-02T02:57:38.000Z

Shipping Cost: 0 USD