Description: Manual Description:Number of Pages: 31 This is a reproduction of an original Asian 9" x 20" Metal Lathe Instructions and Parts Manual. This machine is manufactured in Asia and has been sold under many different names including: JET, Grizzly, Enco 110-0815, 110-0816,110-0817, 110-0820, MSC, etc... This manual contains information on set up, lubrication, maintenance, and controls as well as a complete parts list and exploded views and adjustments. Picture: Specifications: Capacities Compound & Carriage Swing Over Bed: 9" Tool post Type: 4-Wav Swing Over Cross Slide: 5 5/16" Maximum Tool Size: 1/2" x 1/2" Distance Between Centers: 20" Maximum Compound Slide Travel: 1 7/8" Headstock Maximum Cross Slide Travel: 5" Hole Through Spindle: 7/8 Tailstock Spindle Nose (Threading Size Varies): PTESE 11/2" x 8 T.P.I. Tailstock Spindle Travel. 1 9/16" Taper in Spindle Nose: SPECS MT 3 Diameter of Tailstock Spindle: 1 1/16" Number of Spindle Speeds: of Spindle Speeds (RPM): 6 Range 130-2,000 Taper in Tailstock Spindle: MT 2 Gear Box Miscellaneous Number of Longitudinal Feeds: 18 Length of Bed: 32" Range of Longitudinal Feeds (inch/rev. .005.011 Width Bed: 41/2" Range of Inch Threads: 8-56 T.P.I. Overall Dimensions: 371/2" Lx 19 3/4'' Wx 15 3/4'' H Range of Metric Threads: .05-3.0 mm Main Motor. % HP, 1 Ph, 60 Hz Leadscrew: 9/16" x 16 T.P.I. 115V or 230V Contents: Specifications................................................4 Standard Equipment............................................4 Technical data................................................4 Set Up and preparation for operation..........................4 General Description...........................................5 Lathe Bed.....................................................5 Headstock.....................................................5 Carriage......................................................6 Apron.........................................................6 Tailstock.....................................................7 Leadscrew.....................................................7 Gear Box......................................................7 Drive and Electrical Equipment................................7 Controls......................................................8 Working with the BD-920.......................................9 Tool Set Up...................................................9 Manual Turning................................................9 Longitudinal Turning with Auto-Feed...........................9 Taper Turning using Tailstock Set-over.......................10 Taper Turning by Setting the Top Slide.......................10 Turning between centers......................................10 Thread Cutting...............................................11 Example of Gear Set up to cut 10 T.P.I.......................11 Slip Clutch..................................................11 Thread Cutting Tables........................................11 Lathe Accessories............................................12 Universal Lathe Chuck, 3 or 4 jaw design....................12 4-Jaw Independent Chuck......................................12 Drill Chuck..................................................12 Morse Taper Arbor............................................12 Live Center..................................................12 Steady Rest..................................................13 Follow Rest..................................................13 Setting the Steady Rest......................................13 4-Way Tool Post..............................................14 Gear Change..................................................14 Bearing and Slide Adjustment.................................15 Adjustment of Main Spindle Bearings..........................15 Adjustment of Cross and Top Slides...........................15 Adjustment of Feed Screw End Float...........................15 Feed Screw Backlash Adjustment...............................15 Cross Slide Screw............................................15 Compound Slide Spindle Backlash Adjustment...................16 Adjustment of Half-Nut Guide.................................16 Adjustment of Lead Screw Backlash............................16 Replacing the Shear Pin in the Leadscrew.....................16 Replacing the V-belt.........................................17 Lubrication schedule.........................................18 Wiring diagram...............................................19 Parts Breakdown...........................................20-31 Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear, which is better than a pdf download.Visit our eBay Store!We have over 1,100 manuals available. From our shop to yours. We get this. But you get this! Why settle for anything less?We can't make pictures a lot better than the original, but we can fix everything else. Shipping: We ship every M-T-W-T-F except US holidays. All of our manuals are shipped with Delivery Confirmation. We stamp “Do Not Bend” on them to ensure that your manual arrives quickly in good condition. Any package that weighs more than 15.9 oz cannot be shipped First Class, and will be shipped Media Mail. Priority and Express mail options are available to purchase. Since we offer free shipping, we cannot reship manuals for free, due to inaccurate or insufficient addresses. Reshipping Fees for inaccurate or insufficient addresses: $5.00 for the first manual and $2.50 for each additional manual. Service: We have been providing this service to fellow craftsman and machinist for over 20 years. We treat everyone as we would like to be treated. We try to take care of all our customers. We do more than sell manuals, we have a complete woodworking and machine shop. We operate all kinds of machinery everyday.
Price: 20 USD
Location: Nixa, Missouri
End Time: 2024-05-01T20:21:01.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Item Type: Manual
