8-34mm Handheld Rebar Tie Gun Tier Machine Automatic Steel Bar Tying Tool & Wire

Description: Specifications： Color:blue Material: Plastic + Metal Voltage: 12V Battery: Lithium Ion Batteries Battery Capacity: 4500 mAh Battery Charging Time: 1.5 hours full filling Tying Wire Diameter: 0.8mm Tying Wire Length: more than 110 m Applicable Scope Of Steel Strapping: 8mm - 34mm Knot Wire Length: 300 - 500mm Knot Number Per Charge: 1500 times Knot The Required Time: 0.8 seconds at a time Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.) Tool box size: 42cm (16.54inch) *30cm (11.81inch) *10cm (3.94inch)8-34mm Handheld Rebar Tie Gun Tier Machine Automatic Steel Bar Tying Tool & Wire8-34mm Handheld Rebar Tie Gun Tier Machine Automatic Steel Bar Tying Tool & Wire Specifications：Color:blueMaterial: Plastic + MetalVoltage: 12vBattery: Lithium Ion BatteriesBattery Capacity: 4500 MahBattery Charging Time: 1.5 Hours Full FillingTying Wire Diameter: 0.8mmTying Wire Length: More than 110 MApplicable Scope of Steel Strapping: 8mm - 34mmKnot Wire Length: 300 - 500mmKnot Number per Charge: 1500 TimesKnot the Required Time: 0.8 Seconds at a TimeMachine Size: 275 Mm * 65 Mm * 240 Mm / 10.83''X2.56''X9.45''(Appr.) Tool Box Size: 42cm (16.54inch) *30cm (11.81inch) *10cm (3.94inch) Features：Brand New and High Quality.✔ Compact Size, Lightweight, Easy to Grab.✔ It Can save 3-5 Times than Man Power by Hand.✔ Rebar Tier Is a Hand Held Machine Used to Pack Rebars Quickly.✔ It Is a Miniature Motor Tool Has the Trait of Safety and Credibility.✔ Used for Building Market, Including Civil Building, Floor Pipe, Heating Floor Mesh, Steel bar, Etc.✔ Reasonable Structure, Advanced Craft, Simple and Convenient Operation, High Efficiency and Convenient Maintenance.Tying Wire Installations：1. in the State of Start-up, Press the Locking Plate of the Opening Wire Plate, Open the Plate Cover.2. Take out the Tying Wire, Tear the Packaging Film, Pull Straight Wire Head About 10 Cm, Load into the Binding Machine in the Clockwise Direction, the Wire Head into the Guide Tap Tube.Note: Clench the Wire Plate When Tear the Packaging Film, Do Not Let the Wire Loose. If the Wire Is Free to Disperse, It Will Lead to the Spread of the Wire Stuck in the Wire Plate.3. Insert the Head of the Wire Guide into the Tap Pipe Until It Is Resisted.4. Cover the Plate and Fasten the Locking Piece.5. Pinch the Wire Forward with Two Fingers, Press and Hold the Switch and Send the Wire out.6. If You Want to Take out the Wire Plate When Finished, Press and Hold the Locking Piece, Open the Wire Plate Cover Plate, Holding the Wire Tray to the Side and Pull out.Operation Instructions：1. the Rebar Tirer's Jaws Are Stuck to the Intersection of the Steel Bars, and the Steel Bars Are Hooked at 45 Degree Angles.Note: There Can Be No Barrier Between the Mouth of the Jaws and the Wire.2. Press the Start Switch, the Rebar Tirer Machine Carries on the Work (Spins, Hinges Tightly, Cuts off)Note: Press One Button at a Time, Do Not Probe the Jaws at Work.3. When Automatic Completion, the Jaw from the Steel bar Intersection and Then Pull Back, Complete the Process and Prepare for the Next Binding.4. When the Binding Process Is Not Completed, Do Not Unplug the Machine in Advance, Otherwise It Will Cause the Bundling of the Goods Tied Skidding.Operating Skills：1. in Use, the Left Tilt 45 Degrees After Banding, the Next Time the Banding into a Right Tilt 45 Degrees Banding, Left and Right Alternately Banding.2. When the Machine Is About to Tighten, the Machine Will Appear Slightly Shaking, While Holding the Hand of the Machine Not Too Tight, You Can Relax Properly.Maintenance：1. Clean the Machine Regularly, Keep the Wire Mouth Clean.2. This Product Can Not Be Placed Randomly, so As Not to Cause Damage to Parts.3. Batteries Must Not Be Placed Together with Other Metal Objects to Avoid Short Circuit.4. Non-professional Do Not Disassemble the Machine Arbitrarily, Lest Cause Damage.5. When You Encounter an Unresolved Failure, Please Give It to the Professional Repair.Package Included:1x Tying Machine1x Pliers1x Charger1x Storage Box2x Lithium Ion Batteries1x Tying Wire in the Machine (Tying Wire Standard: About 0.8 Mm X 110 M/Roll)Notice:Please Allow 1-3cm Error Due to Manual Measurement and Make Sure You Do Not Mind Before Ordering.Please Understand That Colors May Exist Chromatic Aberration As the Different Placement of Pictures.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.FeaturesDurableshipping noticeCan not ship to Puerto Rico,Alaska/HawaiiBrandUnbrandedMPNDoes Not ApplyColorblue/orange（for choice）MaterialPlastic + MetalTypeRebar TierModelHandheld Rebar Tier ToolVoltage12V1Feature：Exquisite appearance，Durable materialBattery Charging Time1.5 hours full fillingTying Wire Diameter0.8 mmKnot Wire Length300 - 500mmApplicable Scope of Steel Strapping8mm - 34mmBattery Capacity4500 mAhKnot Number Per Charge1500 timesBatteryLithium Ion BatteriesTying Wire Lengthmore than 110 mKnot The Required Time0.8 seconds at a timeMachine Size275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(apTool TypeRebar BenderOn Jun 25, 2024 at 19:31:14 PDT, seller added the following information:

Price: 123.67 USD

Location: Monroe Township, New Jersey

End Time: 2024-10-26T01:32:34.000Z

Shipping Cost: 18 USD