3M PPS Midi Lids w/125 micron filters

Description: 3M PPS midi lids only includes 25 midi size lids and 10 sealing plugs for use with the 3M paint preparation system. 3M PPS is a complete painting system that allows the painter to measure, mix, filter and spray paint materials. 3M PPS midi lids only come with a choice of 125 or 200 micron welded-in filters. Consult with coating manufacturers for recommendation of filter size. Unlike conventional paint cup systems, our 3M PPS eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With pps , you place the disposable liner within the re-usable PPS cup. Then simply mix the paint in the PPS disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS System. With just these few simple steps, youre ready to start spraying. PPS allows the painter to spray consistently 90 deg to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees. After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz of solvent. Specifically designed PPS stainless steel metal adapters allow painters to use the PPS system with virtually any spray gun. Painters have also the option to use the 3M Accuspray ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and cleanup time by as much as 15%. 3M PPS is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. Our goal is to help you operate with greater efficiency and spend less time on cleaning tasks (time associated with cleaning the paint reservoir and spray gun).3M PPS Replacement Midi Lid, For Use With: Paint Preparation System

Price: 200 USD

Location: Fort Worth, Texas

End Time: 2024-12-20T20:44:58.000Z

Shipping Cost: 0 USD