2X Oxygen O2 Sensor For 2013-2020 Ford Fusion & Lincoln MKZ 2.0L L4 Upper+Down

Description: Product Description Manufacturer Part Number: 234-5068,234-4578 Position:up+down Conditon:Brand New Easy to Install & Fully Tested Close to original effect Package Include : 2 * Oxygen Sensors Please check your OE number carefully. Make sure the item fit for your car. Fitment: Fit Vehicles: Please see compatibility chart. Ford C-Max 2.0L L4 ELECTRIC/GAS 2013 2014 2015 2016 2017 2018 Fusion 2.0L L4 ELECTRIC/GAS 2013 2014 2015 2016 2017 2018 2019 2020 Lincoln MKZ 2.0L L4 ELECTRIC/GAS 2013 2014 2015 2016 2017 2018 2019 2020 Notice: Up stream loca tion is between the catalytic converter and the engine Downstream locatio n is between the catalytic converter and the tailpipe Please check fitment notes, pictures and interchange part number for accurate information, and pay more attention to confirm the connector of this item is whether matched with your car before purchase. Have a happy shopping. The oxygen sensor is a device which determines the oxygen content of the exhaust gas. Since the amount of oxygen in the exhaust gas is a very good indicator of combustion efficiency, it is also the best place to monitor the air fuel ratio. Our Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements. Improved Engine Response & Performance Lower Emissions Improved Fuel Economy Longer Sensor Life Meets OEM Specifications How to install an oxygen sensor Step1.Park your Vehicle, set the parking brakes and open the hood Step2.Disconnect the negative battery terminal. Remove the plastic cover. Loosen the 10mm nut. Remove the negative clamp from the battery. Step3.Locate the oxygen sensor on your Vehicle. Do not touch the sensor or the heat shield until the engine cools down. Step4.Press the connector and pull it away to unplug the oxygen sensor. Use a flat head screwdriver to press the locking tab on the connector before you pull it. Step5.Place the oxygen sensor socket on the sensor and break it loose. If the sensor cannot be loosened spray penetrating oil and let it sit for at least 10 minutes. This will make it easier to remove the old Vehicle oxygen sensor. Step6.Install the new oxygen sensor. Tighten the new Vehicle oxygen sensor to the recommended torque. If you are not sure what the correct torque call your Chevy dealer. Step7.Connect the oxygen sensor wire harness by plugging it in.

Price: 42.67 USD

Location: Perth Amboy, New Jersey

End Time: 2024-11-17T10:22:00.000Z

Shipping Cost: 0 USD