Description: IF YOU ARE HAVING ISSUES BURNING UP 5HP SINGLE PHASE 208-230V OR 230V MOTORS, THIS MOTOR HERE IS YOUR SOLUTION. THIS MOTOR IS RATED AT 208V WITH A +/- 10% VOLTAGE DEVIATION. WHICH MEANS, THIS 208V MOTOR CAN WITHSTAND INCOMING VOLTAGES AS LOW AS 190V AND NO HIGHER THAN 225V INCOMING VOLTAGE ON SINGLE PHASE POWER. THIS EBAY LISTING IF FOR A BRAND NEW 5HP LEESON INDUSTRIAL GRADE SINGLE PHASE ELECTRIC MOTOR, MODEL NUMBER 131560.00. THIS MOTOR IS RATED AT 5HP, CAN BE CONNECTED TO 208V INCOMING POWER SUPPLY. THIS MOTOR COMES ON A 184T FRAME AND ROTATES AT 1750 RPM. THIS MOTOR IS REVERSIBLE AND CAN BE WIRED TO ROTATE EITHER CW OR CCW. THIS IS AN OPEN DRIP PROOF MOTOR AND IS INTENDED TO BE USED IN DRY, NON-DUSTY INDOOR ENVIRONMENTS. THIS MOTOR IS BACKED BY A FULL 12 MONTH MANUFACTURERS WARRANTY FROM DATE OF SALE. THIS LEESON COMPRESSOR DUTY MOTOR IS PERFECTLY SUITED TO WITHSTAND THE STARTING TORQUE REQUIREMENTS OF INDUSTRIAL GRADE 5HP PUMPS. THIS LEESON MOTOR IS CAPACITOR START AND RUN. THIS MOTOR IS NOT MADE IN CHINA. PLEASE MAKE SURE THE ELECTRIC MOTOR YOU ARE REPLACING MATCHES THE SPECS SHOWN BELOW BASED ON YOUR EXISTING MOTORS DATA PLATE.WHY YOU ALWAYS NEED A MAGNETIC STARTER ON INDUSTRIAL GRADE MOTORS. A MAGNETIC STARTER IS ALWAYS REQUIRED ON ANY 184T FRAME MOTOR AND LARGER. WIRING AN INDUSTRIAL SIZE MOTOR THROUGH THE PRESSURE SWITCH ALONE, IS NEVER A GOOD IDEA, AND HERE'S WHY. PRESSURE SWITCHES DO NOT COME WITH OVERLOAD PROTECTION FROM POWER SURGE OR LIGHTING. IN ADDITION, PRESSURE SWITCHES HAVE VERY SMALL CONTACT POINTS THAT CONNECT TO THE MOTOR. SMALL CONTACT POINTS CAN STARVE YOUR MOTOR OF THE NECESSARY POWER IT REQUIRES TO START AND RUN NORMALLY. MAGNETIC STARTERS NOT ONLY PROVIDE YOU WITH MOTOR PROTECTION FROM POWER SURGE AND LIGHTING, THEY ALSO HAVE LARGER CONTACT POINTS THAT CONNECT TO YOUR ELECTRIC MOTOR. ALLOWING FOR A STEADY FLOW OF CURRENT THAT AN INDUSTRIAL GRADE MOTOR REQUIRES TO RUN AND ESPECIALLY START UP. BY INCORPORATING A MAGNETIC STARTER WILL ALLOW YOUR MOTOR TO LAST MUCH MUCH LONGER. PLEASE VISIT OUR EBAY STORE FOR THE BEST PRICE AND SELECTION OF MAGNETIC STARTERS. 5HP - 184T FRAME - 1750 RPM - SINGLE PHASE - 208 VOLT - 1-1/8" SHAFT DIAMETER - 2.75" SHAFT LENGTH - MADE IN MEXICOPLEASE SEE ATTACHED PICS FOR MOTOR DIMENSIONS AND FRAME DIMENSIONS. IF YOU NEED HELP CHOOSING THE RIGHT MOTOR TO REPLACE YOUR EXISTING MOTOR, WE'RE HERE TO HELP. ATTACH A PIC OF YOUR EXISTING MOTORS DATA PLATE TO THE CONTACT SELLER LINK AT THE TOP OF THE PAGE. TECHNICAL INFO:HORSEPOWER: 5AMPERAGE: 23.2 @ 208V PHASE: SINGLE PHASEVOLTAGE: 208V ( THIS MOTOR IS USABLE ON VOLTAGE BETWEEN 190V AND 225V )RPM: 1750TORQUE: 15 FT LBSBASE: REINFORCED FIXED BASEFRAME: 184TSHAFT DIAMETER: 1-1/8" KEYED SHAFTSHAFT LENGTH: 2.75"ROTATION: REVERSIBLE CW OR CCW ROTATIONFREQUENCY: 60HZSERVICE FACTOR: 1.15 @ 208VENCLOSURE: ODP OPEN DRIP PROOF CONSTRUCTION: STEEL FRAMEWEIGHT: 86 LBSWARRANTY: 12 MONTH
Price: 814.53 USD
Location: Kennesaw, Georgia
End Time: 2024-07-27T16:52:49.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
AC Motor Type: CONTINUOUS
Enclosure Type: ODP (Open Drip-Proof)
Model: C184K17DB32A
Country/Region of Manufacture: Mexico
Full Load Amps: 23.2A @ 208V
Current Type: AC
AC Frequency Rating: 60 Hz
California Prop 65 Warning: This product contains or may contain chemicals,including Cobalt known in the state of California to cause cancer, birth defects, or other reproductive harm.
Actual Rated Input Voltage: 208V
AC Phase: Single Phase
Insulation Class: F (Max 311°F)
MPN: 131560.00
Rated/Full-Load Torque: 15 FT LBS
Shaft Diameter: 1 1/8
Mounting Type: Foot-Mounted
Rated Load (HP): 5
Special Motor Construction: COMPRESSOR DUTY
Brand: LEESON
Reversible/Non-Reversible: Reversible
DIRECT REPLACEMENT OF: WEG 00518OS1CCD184T BALDOR L1410T L1430T
Service Factor: 1.15
Base RPM: 1750
Shaft Type: Keyed
