Description: Autel PowerScan PS100---Revolutionary Circuit Tester Autel PowerScan PS100 Tool is the most revolutionary circuit tester to date. Featuring AVOmeter, test light, built-in flashlight, short circuit indicator, relay/ component tester, continuity tester and bad ground indicator, the PowerScan 100 is truly the ultimate in power and affordability, allowing users to check circuitry in one single step. Autel PS100 Car Circuit System Diagnostic Tool can quickly and accurately diagnose the electrical system, solve problems such as circuit short circuit, open circuit, etc., which is an essential circuit scanner for every technician. Autel PS100 Circuit Tester Kit--- Do Everything For You DC voltage range : 0-65V +1 digit; Resistance range : 0–200 KΩ; Frequency response of tone passage: 0Hz to 10Khz. Performs multi-service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip Component activation with a flip of the power switch, Instantly identifies positive, negative and open circuits Test bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses Instantly checks continuity of switches, relays and diodes Circuit breaker protected Extra 20ft (extendable) cable provides excellent accessibility to test along the vehicle Built-in Flashlight, work in the dark Simple button design More Useful Features, Give You Try Autel PowerScan PS100 has rich functions, please check the following introduction: 4 modes to diagnose the electrical system: DC voltage, AC voltage, resistance, diode. Voltage & Polarity Test: According to the LED light and sound after the probe tip touches the circuit, it can accurately judge the positive, negative, and open circuits. Continuity Test: While the tool is in Resistance mode, using the probe tip with chassis ground or the auxiliary ground lead, continuity can be tested on wires and components attached or disconnected from the vehicle’s electrical system. Signal Circuit Test: When the vehicle has a fault code, in order to quickly determine whether the fault is caused by a certain sensor circuit, you can use this tool to quickly draw a conclusion. Find Short Circuit: A short can manifest itself as a blown fuse or a tripped electrical protection device. Use the probe tip to activate and energize each fuse contact. The contacts that trip the circuit breaker are shorted. Find Bad Ground: Probe for suspected ground wires or touch probe tips. If the breaker has tripped, the circuit is most likely grounded. Activate Component in your hand/ in the vehicle/ W/Ground Test Trailer Lights and Connections: Check function and orientation of connectors and trailer lights Red/Green Polarity Indicator: The red/green polarity LED illuminates when the probe tip voltage matches and is within ±0.8 volts of the battery voltage. It is additional information that may be of value to a technician. DC Voltage While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt. AC Voltage While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min. voltage, frequency and duty cycle. Resistance While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead. Tone On/ Off While the tool in this mode, just do a quick press of the mode button to toggle the tone on or off. While quickly pressing (a quick press and release) the mode button, if a short high beep is heard, this means the audio tone is turned on. If a short low beep is heard, the audio tone is turned off. Extra 20ft Extension Cable 20ft Extension Cable: Autel PS100 itself has an extra-long cable, but considering the volume of 12V-24v vehicles such as ships and trucks, we have additionally equipped with extra 20FT extension cable for emergencies. With the 20FT extension cable, you can freely test the condition of any vehicle circuit without moving the device because the cable is not long enough. Autel PS100 Circuit Tester has two power supply methods: 1. Vehicle battery power supply 2. Ciga-rette li-ghter power supply Quick Self-Test: Before you test a circuit or component, be sure your tool is in good order by doing a quick self-test. With the tool connected, perform a quick self-test. The power switch is a momentary rocker switch located on the tool's body. Flanking the switch are positive and negative markings. Press the Power Switch forward to activate the tip with a positive voltage. The Red LED should light and the LCD display will read the battery voltage. If the tone feature is turned on, a high pitched tone will sound. Let go of the power switch and the LED will turn off and the high tone will cease. Press the Power Switch rearward to activate the tip with a negative voltage. The Green LED should light and the LCD display will read the „0.0V‟ (ground). If the tone feature is turned on, a low pitched tone will sound. Let go of the power switch and the LED will turn off and the low tone will cease. Your tool is working correctly and is now ready for use. Test Tool Specifications DC voltage range 0-65V +1 digit Resistance range 0 – 200 KΩ Frequency response of tone 0Hz to 10Khz Circuit Breaker Rating current 1 – 10 Amp Display TFT color display (160 x 128 dpi) External Power 12.0 or 24.0 V power provided via vehicle battery Package including 1* PowerScan PS100 1* 20ft. extension cable 1* Rugged blow molded case 1*Probe tip 1* Battery clips 1*Ciga-rette lig-hter adapter 1*User's Manual On Sep 18, 2023 at 20:42:31 PDT, seller added the following information:
Price: 85 USD
Location: Los Angeles, California
End Time: 2024-03-19T03:37:43.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Volt: 6- to 30-volt vehicle electrical systems
Model: Autel PowerScan PS100
Type: Electrical System Diagnostic Tool
Display: TFT color display (160 x 128 dpi)
Features: Analog Display, Continuity Testing, Digital Display, Relay & Component Testing, Voltmeter
Operating Temperature: 0 to 60°C (32 to 140°F)
External Power: 12.0 or 24.0 V power provided via vehicle battery
Manufacturer Part Number: Does Not Apply
Vehicle Type: Passenger Vehicle
Accessories: Carrying Case, Clamps, Probes, User Guide
LengthWidthHeight: 126mm(4.96”)46.5mm(1.83”)35mm(1.38”)
NW: 0.105kg (0.23lb),GW: 0.726 kg(1.6lb)
Brand: Autel
Warranty: 1 Year