2020 Seadoo OEM RXT-X 300 jetski front hood top cover deflector 269502406

Description: Selling a 2020 Seadoo OEM RXT-X 300 jetski front hood top cover deflector 269502406From a 2020 RXT-X 300 Grey with Jungle green writing my ref R120 May have a few very minor marks but still in very good condition Please do not buy or make an offer on this item until you are certain it will fit your particular Jetski! THIS ITEM IS A “USED PART” SO IT WILL HAVE THE USUAL SIGNS OF WEAR/USE ETC AND MAY HAVE MINOR MARKS OR SCRATCHES ON IT ETC. IF YOU WANT TO KNOW A MORE DETAILED CONDITION OF A PART THEN PLEASE ASK FIRST.USED PARTS DO NOT COME WITH A STANDARD WARRANTY OR 12 MONTH GUARANTEE! Please read the following information before making an offer or buying this item.A lot of time is spent cleaning, checking and listing these parts, so please take your time to study any photo’s or descriptions carefully before purchase.Please contact me before raising an “Ebay case” or leaving negative feedback as I will try my best to resolve any problems.On most occasions you will receive the item as shown in the photo, however on a very rare occasion, you may be sent an identical item, but not the actual one shown in the photo. This may fit other similar models so either check with your dealer or research it yourself before buying. If you have any questions please ask before buying or bidding. Rebel Jetski’s is one of the largest used Jetski parts stockist in the East of England for SeaDoo, Yamaha, Kawasaki, Polaris and Mastercraft Wetjet. If you do not see your item listed it does not mean we do not have it; so just ask or give us a call at tel 07860 736274 and it can be listed on Ebay for you.You MUST make sure it is suitable for your ski before buying it or making a best offer. The initials starting “RJ” or “R” in the title & description is for my stock reference and is not a part numberPOSTAGE.Due to courier restrictions, some larger or heavier items posted to the area's below, may incur an additional postage charge so please check if you want delivery to one of these areas.AB31-AB38, AB40-AB56, IV1-IV28, IV-30-IV32, IV36, IV40, IV52-IV54, IV63, KW1-KW14, PA21-PA38, PH4-PH41, PH49-PH50, All BT postcodes (Northern Ireland)HS, IV41-IV49, IV51, IV55-IV56, KA27-KA28, KW15-KW17, PA20, PA41-PA49, PA60-PA78, PH42-PH44, ZE, IM (Isle of Man), Channel Islands ISLE OF WIGHT - a Surcharge (in addition to any stated postage to mainland UK).You must ask first for a postage price if you want delivery to a non UK mainland address or one of the locations specified above.I will try to post your item as quickly as possible (usually the next working day) after payment is received. On some occasions I will not be able to post this quickly so you should check the standard postage times shown on the listing. No Guarantee is given for any delays after the item has been posted and proof of posting is always obtained.Collection may be possible for some larger items but you must contact me first before purchasing the item.ELECTRICAL ITEMSUnless you are competent in Jetski electronics and have properly identified the fault, I would suggest you seek advice from an expert first and not just guess what may be wrong! You may cause major damage to an electrical component (MPEM’s and ECU’s etc) if you have failed to correctly diagnose what caused yours to break!I will not issue a refund for returned MPEM’s that have been sold as “tested and fully working” unless it has been fitted by a certified Jetski engineer or approved repair centre. (Proof must be supplied)Please be aware that some electrical parts cannot be fully tested before being posted (usually specified in description). For this reason, please test the item on your jetski before it is fully fitted. No responsibility or labour cost is accepted for items fitted that are subsequently found to be faulty or broken.During the removal of certain parts, some electrical items may be supplied with the terminal pins removed from the plugs. You will need to check that they are placed into the correct terminal holes on the plug before re-fitting. Special terminal pin/plug removal tools must be used to remove the wires from the plug for fitment. You must use this tool, as anything else is likely to cause damage to the pins and cutting and re soldering is an absolute NO NO!!. Some wires may have been replaced back into the plug to prevent damage during transit so please check that they are in the correct hole before fittingReturns policyAs per the Consumer Protection (Distance Selling) Regulations 2000, I offer a 14 day return and refund service, subject to the additional terms and conditions. 1) Please contact me first before starting a return as i should be able to sort your problem out quicker than the standard Ebay returns process. 2) The item I send you must be returned to me in the exact same state it was sent out and have all the original attachments and/or internal parts. (No swapping over of your faulty item or internals etc and trying to return item as faulty)3) The item must not have been dismantled or tampered with in any way, except for some items that must be disassembled in order to fit.4) For faulty items, you must notify me via Ebay messages that an item is faulty within 7 days of receiving the item. 5) A full refund including any outbound postage will be given for faulty items or items not as described once I have received it back and checked it.6) Unless the item is faulty, You are responsible for the return post cost and proof of posting must be obtained. Items over £50 must be sent recorded delivery or suitably insured, again at your costIn addition to my terms you must check that the item is compatible for your model as items purchased in error will result in your account being blocked against any future purchases.Any items sold that are specified as “spares or repair” or “faulty” cannot be returned.Thank you for visiting Rebel Jetski’s

Price: 75 GBP

Location: Brentwood, Essex

End Time: 2024-11-17T23:07:10.000Z

Shipping Cost: 33.53 GBP