2 Accessories Flat Tapered nozzle+ Holder) For Ryobi 18V Compact Blower PSBLB01

Description: Accessories Holder and Tapered Nozzle for Ryobi 18v Compact Blower PSBLB01 | Blower NOT included | PLEASE read description These items are all specifically designed to work with the Ryobi 18v One+ Compact Brushless Blower Model #PSBLB01. All of these items simply pressure-fit or clamp on to the blower and no tools are required to install them. They're also easy to remove. These items can be purchased separately or in bundles at reduced prices. ACCESSORIES HOLDER: Since the blower comes with 2 extension tubes and a wide flat nozzle, this accessories holder allows you to store and hold these 3 items on the blower itself. It simply clamps onto the tube on the blower and has 2 more clamp rings to hold the extension tubes. There's a twist-lock ring to hold the additional nozzle that's not in use which includes recessed triangle markings (similar to the blower's shaft) for alignment. This assembly can be mounted above OR below the main shaft of the nozzle per your preference. See photos. While the blower can still function and the handle with trigger are still accessible while the accessories are attached, we recommend you remove the accessories holder when using the blower. Excessive movement may cause the clamping force to weaken over time. FLAT TAPERED NOZZLE: This additional nozzle with a flatter/wider shape focusses the airflow to get a more concentrated blast of air. It twist-locks to the blower the same way other nozzles attach and includes recessed triangle markings similar to the Ryobi nozzle. It is rigid plastic (not flexible) with a thickened & beveled edge at the tip. The Ryobi Compact Blower PSBLB01 is NOT included and shown in photos for reference only. The extension tubes and wide flat nozzle are NOT included either (since these come with the blower). Any Ryobi 18v One+ Batteries shown in photos are NOT included. The Tapered Nozzles do change the air flow through the blower. Use these at your own risk and seller assumes no responsibility to your blower by using these accessories. Dimensions: Accessories Holder - 7.7" x 3.2" x 3.5" (195mm x 82mm x 89mm) Flat Tapered Nozzle - 2.4" diameter x 3.5" (61mm diameter x 90mm) Note: The Accessories Holder has been modified from an earlier version to be stronger & more rigid. These are uniquely designed and 3D-printed by the Seller in the USA. Items are lightweight and 3D-printed in PLA plastic. Due to the printing process, there may be some minor imperfections which are mostly likely to be on the bottom/back side, not exposed to view. PLA plastic is made from a renewable resource and is biodegradable and eco-friendly. 3D Printing involves the heating and depositing of material on a flat board one layer at a time, thus most exposed sides have small, fine lines. Infill (non-exposed) areas are not solid plastic.

Price: 24.95 USD

Location: Lexington, Kentucky

End Time: 2025-01-12T15:44:32.000Z

Shipping Cost: N/A USD