1986-2014 Mustang 8.8" 4.10 Ring & Pinion w/ 31 Spline Traction Lok Differential

Description: 1986-2014 Mustang 8.8" 4.10 Ring & Pinion w/ 31 Spline Traction Lok Differential 1986-2014 Mustang 8.8" 4.10 Ring & Pinion w/ 31 Spline Traction Lok Differential ITEM DESCRIPTION •Brand New in the Ford Racing boxes •Ford Racing part #s M-4204-F318C, M-4209-88410, & M-4210-B2 •Fits 31 Spline 8.8" rear axles through 2014. Does not fit 2015+ •Fits 1986-1995 Mustang LX, GT w/ 5.0 V8, 1996-2004 Mustang GT 5.0, 1993-1998 Mustang Cobra, & 2003-2004 Mustang Mach 1 •Low profile design also fits 2005-2014 Mustang GT and 2007-2014 Shelby GT500 Mustang except 2013-2014 Track Pack option (because of rear sway bar) •Sold as a kit, includes traction lok differential, 4.10 Ring & Pinion Gears, Ring & Pinion Installation Kit •Entire Kit is ALL Genuine Ford Racing FRPP M-4204-F318C Traction Lok Differential •Fits ALL 8.8 differentials with a 31 Spline Axles •Will accept anti-lock exciter ring, •Traction-Lok limited-slip differential •Fits Solid or (IRS) independent rear suspension •Includes Carbon Fiber Clutch Plates for increased durability •Original equipment in 2003-04 Mustang Cobra •Requires 4-ounces of CM-19546-A1 friction modifier with initial fill FRPP M-4209-88410 Ring & Pinion Gears • Includes Ford Pinion Nut • Includes Ford Crush Sleeve • Made by Ford Racing •No one does 8.8" gears better than Ford Racing...stonger and quieter. •The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. •Made in the United States at Ford's Sterling Axle Plant (competitors in this price range are primarily produced in China) •OEM quality - our superior surface finish, hardening, and manufacturing consistency provide the strongest and quietest 8.8" gears in the market! These are the same units that have 100,000 mile warranties in our production cars. Higher quality gears means more satisfied customers! •Race Proven - Ford Racing 8.8" gears are the choice of championship road racing and drag racing teams including Multimatic Motorsports and Kurgan Motorsports. FRPP M-4210-B2 Ring & Pinion Installation Kit • Excellent upgrade for all 8.8" rear ends through 2014. Does not fit 2015+ • High-torque bearing gives added durability for modified vehicles • Contains all components from M-4210-A plus all differential bearings Includes: -2012 Shelby GT500 high-torque pinion bearing -Pinion and carrier shims -Crush sleeve -Pinion nut -Pinion seal -Ring gear bolts -Mustang GT carrier bearings -Gear-marking compound -Cover gasket 1986-2014 Mustang 8.8" 4.10 Ring & Pinion w/ 31 Spline Traction Lok Differential Item Description 1986-2014 Mustang 8.8" 4.10 Ring & Pinion w/ 31 Spline Traction Lok Differential ITEM DESCRIPTION •Brand New in the Ford Racing boxes •Ford Racing part #s M-4204-F318C, M-4209-88410, & M-4210-B2 •Fits 31 Spline 8.8" rear axles through 2014. Does not fit 2015+ •Fits 1986-1995 Mustang LX, GT w/ 5.0 V8, 1996-2004 Mustang GT 5.0, 1993-1998 Mustang Cobra, & 2003-2004 Mustang Mach 1 •Low profile design also fits 2005-2014 Mustang GT and 2007-2014 Shelby GT500 Mustang except 2013-2014 Track Pack option (because of rear sway bar) •Sold as a kit, includes traction lok differential, 4.10 Ring & Pinion Gears, Ring & Pinion Installation Kit •Entire Kit is ALL Genuine Ford Racing FRPP M-4204-F318C Traction Lok Differential •Fits ALL 8.8 differentials with a 31 Spline Axles •Will accept anti-lock exciter ring, •Traction-Lok limited-slip differential •Fits Solid or (IRS) independent rear suspension •Includes Carbon Fiber Clutch Plates for increased durability •Original equipment in 2003-04 Mustang Cobra •Requires 4-ounces of CM-19546-A1 friction modifier with initial fill FRPP M-4209-88410 Ring & Pinion Gears • Includes Ford Pinion Nut • Includes Ford Crush Sleeve • Made by Ford Racing •No one does 8.8" gears better than Ford Racing...stonger and quieter. •The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. •Made in the United States at Ford's Sterling Axle Plant (competitors in this price range are primarily produced in China) •OEM quality - our superior surface finish, hardening, and manufacturing consistency provide the strongest and quietest 8.8" gears in the market! These are the same units that have 100,000 mile warranties in our production cars. Higher quality gears means more satisfied customers! •Race Proven - Ford Racing 8.8" gears are the choice of championship road racing and drag racing teams including Multimatic Motorsports and Kurgan Motorsports. FRPP M-4210-B2 Ring & Pinion Installation Kit • Excellent upgrade for all 8.8" rear ends through 2014. Does not fit 2015+ • High-torque bearing gives added durability for modified vehicles • Contains all components from M-4210-A plus all differential bearings Includes: -2012 Shelby GT500 high-torque pinion bearing -Pinion and carrier shims -Crush sleeve -Pinion nut -Pinion seal -Ring gear bolts -Mustang GT carrier bearings -Gear-marking compound -Cover gasket Shipping We ship Monday-Friday and strive for orders to ship within 1-2 business days. We use UPS and FedEx for the majority of our orders but reserve the right to use alternative but comparable means to get you your product as quickly and efficiently as possible. All orders will require a physical address, please provide this upon ordering to expedite the shipping process. Even with our huge inventory, we may run out of an item. If this is the case you will receive an email with an expected availability date. Returns & Warranty We offer 30 Day Free Returns. Refunds for returns will be given once the item has been received and inspected. Items must be New, Unused, Not Installed, in the Original Packaging and able to be resold. Incomplete returns may not be eligible for this policy. Please message us to start a return. Warranty on product is replacement of part only for defects in materials and workmanship. No cash or compensation for labor will be given for defects in material and workmanship. Defective part must be returned in order for new part to be provided. OUR COMMITMENT We are committed to making sure that you leave this transaction satisfied. We value your feedback, and we strive to do everything we can to earn Five Stars and Positive Feedback on every order. If you are unhappy with your purchase for any reason, please CONTACT US prior to leaving feedback so that we can make things right for you. Contact Us We encourage our Buyers to communicate with us at any time. Feel free to contact us directly through eBay. All emails will be responded to within 24 hours. We look forward to hearing from you! Powered By 3Dsellers.com - Try for Free!

Price: 703.73 USD

Location: Memphis, Tennessee

End Time: 2024-09-03T14:35:43.000Z

Shipping Cost: 0 USD